BAUHN APPS-0322 Portable Party Speaker User Manual

BAUHN APPS-0322 Portable Party Speaker

Welcome

Congratulations on your purchase!
This manual tells you all you need to know about using your new BAUHN® product. Please take special note of any important safety and usage information presented with the symbol. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. Domestic use only: This product is intended for indoor domestic use only. Do not use this product for anything other than its intended purpose, and only use it as described in this manual. We hope you will enjoy using your purchase for many years to come.

Unpack and Prepare

What’s in the box
Before setting up your new product, check you have everything:

•  Portable Party Speaker
•  Remote Control
• AAA Activ Energy Batteries (2)
•  Wireless Microphone
•  AA Activ Energy Batteries (2)
•  AC Power Cable
•  AC Power Adaptor
•  Warranty Certificate
•  General Safety Warnings
•  User Manual

Product Overview

Speaker Overview

Control Panel

1. USB Slot: insert your USB for music playback
2.  Micro SD (TF) Card Slot: insert Micro SD/TF card for music playback
3.  AUX-In Port
4.  GUITAR: input for guitar (not included)
5.  MIC 1/MIC 2: input for wired microphones (not included)
6.  Volume Knob: adjust the volume level
7.  EQ: change EQ mode
8.  MIC PRIORITY: turn microphone priority on/off
9. LIGHT EFFECT: press to change the speaker light effect. Press repeatedly to change between light effects/turn the light effect off
10. TREBLE/BASS: press to select treble/bass and turn the volume knob to adjust the level. Press and hold to turn mega bass on/off.
11. (Repeat): repeat current song :
12. play the previous song
13. : play/pause song
14. : play next song
15.  MODE: press to switch between USB, TF, AUX, and Bluetooth® mode.
16.  BT: press and hold when on other modes to switch to Bluetooth® mode. Press to connect to the paired Bluetooth® device. Press again to disconnect and un-pair the Bluetooth device®.
17. 17 GUITAR: press to adjust the guitar volume
18. MIC: press to adjust the microphone volume. Press again to adjust the microphone echo volume.

Rear Panel

•  DC In Port
• Charging Status Indicator
•  Power Switch: press to turn speaker on/off

Remote Control

Setup
Insert the supplied AAA Activ Energy Batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed into place.

Precautions When Using Batteries

•  Do not use old and new batteries together.
•  Do not use different types of batteries (e.g. Manganese and Alkaline batteries) together.
• Remove the batteries from the remote if you do not intend to use it for a long time.
•  When discarding used batteries, follow any guidelines for recycling and disposal of batteries that apply in your local area.
•  Keep batteries away from children and pets.
•  Never throw batteries into a fire or expose them to extreme heat

Remote Overview

Wireless Microphone

1.  Battery indicator (red LED when mic is on)
2. On/Off switch
3.  Battery cover (twist to open)

Setup
Insert the supplied AA Activ Energy Batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed into place.

Precautions When Using Batteries

•  Do not use old and new batteries together.
•  Do not use different types of batteries (e.g. Manganese and Alkaline batteries) together.
•  Remove the batteries from the microphone if you do not intend to use it for a long time.
•  When discarding used batteries, follow any guidelines for recycling and disposal of batteries that apply in your local area.
•  Keep batteries away from children and pets.
•  Never throw batteries into a fire or expose them to extreme heat.

Operation

Charging and Power on

•  Charging: plug in the supplied power adaptor to the DC IN port to charge the speaker for 5-6 hours before use. During charging, the charging status indicator on the back of the speaker will flash blue. Once fully charged, the indicator will light up green.
•  Power on: press the POWER switch on the speaker to turn the speaker on.

Control Panel Operations

• Use the buttons to navigate between songs/FM stations.
•  Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume.
•  Use the MODE button to switch between the input modes. The LED display screen will show the current input mode the speaker is on.

Battery Status

• You can view the battery status of the speaker on the LED display screen. When the battery is low, the battery icon on the display screen will flash. Please plug in the supplied power adaptor to charge the speaker.

LED Light

• The speakers have LED lights across the front of the speaker. Press the LIGHT EFFECT button on the speaker or Light SW button on the remote control to turn the lights on/off.

Bluetooth® Mode

• Press and hold the BT button on the speaker until Bluetooth® is selected; “bLUE” will flash on the LED display screen and you will hear “Bluetooth mode.”
•  On your smartphone, search for “BAUHN APPS-0322.” If a password is required, enter “0000”. If pairing is successful, the LED display screen on the speaker will display “bLUE”. You will also hear “Bluetooth connected.” You can now play music from your smartphone.
•  Press the button on the speaker or the remote control to play/pause music.
• Press the buttons on the speaker or the remote to select the previous or next track.
• Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume level.
•  Alternatively, you can control music playback from your smartphone.
•  Press the BT button on the speaker again to disconnect the Bluetooth® connection
•  After disconnecting the Bluetooth® connection, “bLUE” will flash on the LED display screen.
•  Note: only one playback unit can be connected to the speaker. If the speaker is already connected to another playback unit, the speaker will not appear in the Bluetooth® selection list. To disconnect the existing paired device, press the BT button on the speaker.

AUX Mode

•  Use an audio cable (not included) to connect your external device through the AUX port on the speaker. The speaker will automatically turn into AUX mode.
•  Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume level.
•  Note: to play/pause, play previous or next tracks, please control from your external device.

USB Mode

• Insert your USB device into the USB slot on the speaker. The speaker will automatically play the files.
•  Press the button on the speaker or the remote control to play/pause music.
• Press the buttons on the speaker or the remote to select the previous or next track.
•  Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume level.
•  Note: If a USB device is not inserted in the speaker, USB mode will not be available.

Micro SD Card Mode

• Insert your Micro SD (TF) card into the MICRO SD CARD slot on the speaker. The speaker will automatically play the files.
• Press the button on the speaker or the remote control to play/pause music.
• Press the buttons on the speaker or the remote to select the previous or next track.
• Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume level.
• Note: If a Micro SD (TF) card is not inserted in the speaker, Micro SD Card mode will not be available.

Recording

• Plugin your USB device or Micro SD (TF) card into the USB/Micro SD card slot on the speaker. The speaker will automatically play the files.
•  Plug in a wired microphone (not included) into the MIC 1 port on the speaker. Test the microphone and ensure your voice is audible from the speaker.
•  Press the REC button on the remote control to start your recording. Press the button again to stop recording.
• The speaker will automatically play the saved recording. Press the button to pause playback.
• Note: the recording function can only record your voice.

Microphone

•  Turn on the supplied wireless microphone. The battery indicator will light up orange. The microphone will automatically connect to the speaker.
•  Press the MIC button on the speaker to adjust the microphone’s volume. Press the button again to adjust the microphone’s echo volume. You can also adjust the volume level by pressing the M.VOL+/M.VOL- buttons on the remote control.
•  Press the M.TRE+/M.TRE- buttons on the remote control to adjust the treble level.
•  Press the MIC PRIORITY button on the speaker to turn microphone priority on/off. Your vocals will overpower the background music. This function is off by default.
•  After use, turn off the wireless microphone and store away if not in use.
•  You can also plug in a wired microphone (not included) into the MIC 1 port of the speaker. Another wired microphone can be plugged into the MIC 2 port of the speaker if 2 microphones are desired.
•  After use, unplug the microphone and store away if not in use.

Guitar

•  Plug in a wired guitar (not included) into the GUIT port on the speaker.
•  Press the GT.VOL+/GT.VOL- buttons on the remote control to adjust the volume level
•  After use, unplug the guitar and store it away if not in use.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service.

connected.

Remote control does not work

| •    Use the remote control closer to the speaker. Aim directly at the sensor on the front of the unit.

•    Please check the battery is installed correctly.

•    Replace the battery.

Echo function not working for wired microphone| •    Check that the wired microphone is properly plugged into the Mic port of the speaker.

•    Adjust the microphone echo volume by pressing the MIC button on the speaker.

•    Note: echo function is not supported for guitar microphones.

Wireless/wired microphone/guitar not working| •    Turn the MIC volume up.

•    Check that the batteries are inserted correctly and turn on the microphone’s on/off switch.

•    For wired microphone and guitar, check that it is properly plugged into the MIC/GUITAR ports.

Distorted noise coming from microphone

| •    Have at least a 1metre between the microphone and speaker as having the microphone too close to the speaker will cause interference.

•    Ensure that the microphone is not too close to the power source as having the microphone too closer to a power source will cause interference.

No response from the speaker|

•    Turn off the power switch and then turn on the switch.

•    Ensure you have paired the speaker with your Bluetooth enabled device.

•    Ensure the Bluetooth function is activated on your Bluetooth enabled device.

•    Press and hold the  button on the remote for 3 seconds to disconnect the existing paired device.

General sound issues

| •    Make sure the speaker is set to the correct mode; make sure the volume knob is not set to off.

•    Turn the volume knob to increase the volume.

•    Press the VOL + button on the remote to increase the volume.

•    Bluetooth mode: make sure the speaker is paired to the correct Bluetooth device.

•    AUX mode: ensure you have connected the audio cable to the AUX port of the speaker, and the external device’s volume is on.

Specifications

For Technical Support:

• 1300 002 534
• tempo.org
• tempo.org/support
• Distributed by Tempo (Aust) Pty Ltd,
• PO Box 132, Frenchs Forest NSW 1640

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners.

Compliance and Responsible Disposal

Packaging
The packaging of your product has been selected from environmentally friendly materials and can usually be recycled. Please ensure these are disposed of correctly. Plastic wrapping can be a suffocation hazard for babies and young children, please ensure all packaging materials are out of reach and are safely disposed of. Please recycle these materials rather than throw them away.

Product
At the end of its working life, do not throw this product out with your household rubbish. An environmentally friendly method of disposal will ensure that valuable raw materials can be recycled. Electrical and electronic items contain materials and substances which, if handled or disposed of incorrectly, could potentially be hazardous to the environment and human health.

Compliance
This product complies with the Australian Safety Standard AS/NZS 62368.1 to ensure the safety of the product.

Warranty Information
The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labor. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Repair and Refurbished Goods or Parts Notice
Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console, or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assured though,  refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 132, Frenchs Forest, NSW 1640, Australia
Telephone: 1300 002 534 (Aust) – Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm AEST)
Email: tempo.org/suppor

Online support
Visit bauhn.com.au for the latest User Manual for information on the updated features.

Warranty returns
Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.

The product does not work?
If you encounter problems with this product, or if it fails to perform to your expectations, please contact our After Sales Support Centre on 1300 002 534.

ALDI guarantees that our products are developed to our stringent quality specifications. If you are not entirely satisfied with this product, please return it to your nearest ALDI store within 60 days from the date of purchase for a full refund or replacement, or take advantage of our after sales support by calling the supplier’s Customer Service Hotline.t

AFTER SALES SUPPORT

AUS 1300 002 534
tempo.org/support
MODEL: APPS-0322 PRODUCT CODE: 708268 03/2022

References

• Bauhn – Effortless Technology
• Tempo Global | Connecting the Supply chain to our Customers
• Support Centre | Tempo Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>