Impact LS-CM Ceiling Mount Light Stand Instructions

Impact LS-CM Ceiling Mount Light Stand

LS-CM Ceiling Mount Light Stand

The Impact telescoping ceiling mount allows you to suspend a monolight, LED, or studio flash with a 5/8-inch receiver or stud from a ceiling or other flat surface. It features four anchor points on the plate to ensure a solid and secure connection with nails, drywall anchors, or molly or toggle bolts. It is ideal for mounting light fixtures that weigh up to 22 pounds while preserving floor space in small work areas or studios.

Precautions

• Use the safety cable eyelet for extra security when mounting a light fixture.
• Make sure at least two screws are attached to the ceiling joist when screwing the plate directly into a ceiling joist.

Overview

1. Safety cable eyelet
2. Mounting plate
3. Locking knob
4. Telescoping arm
5. Spigot lock
6. Two-way 5/8 in. receiver
7. Reversible 5/8 in. spigot with 1/4-20 and 3/8-16 threads

Setup

Attaching the Ceiling Mount to the Ceiling

1. Use the mounting plate to mark the position of the mounting holes on the ceiling.

2. Drill appropriate-sized holes for the plastic drywall anchors,
   metal concrete anchors, molly bolts, or toggle bolts in the marked locations. If you’re using drywall anchors, tap them into the holes. Note: Many drywall anchors and molly bolts are self-tapping and don’t require a drill for installation.

3. Put the plate against the ceiling and insert screws (for drywall anchors), molly bolts, or toggle bolts through the holes, and fasten them until they’re fully tightened, and the plate is secure.

Mounting a Light and Accessories

The two-way receiver lets you mount a light horizontally or vertically. The reversible spigot features a 3/8-16 thread on one end and a 1/4-20 thread on the other. Use these threads to mount a ballhead, LED light, microphone, or light-shaping accessory. For extra security, use the eyelet on the mounting plate to secure your light fixture with a safety cable.

Specifications

• Plate Dimensions: N/A
• Arm Length: N/A
• Load Capacity: up to 22 pounds
• Tube Diameters: N/A
• Mounting: nails, drywall anchors, or molly or toggle bolts
• Mounting Hole Diameter: N/A
• Material: N/A
• Color: N/A
• Weight: N/A

One-Year Limited Warranty

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. Except as provided herein, the warranty provider makes neither any express warranties nor any implied warranties, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (RMA) number and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com

Product Introduction

Thank you for choosing Impact.
The Impact telescoping ceiling mount lets you suspend a monolight, LED, or studio flash with a 5/8-inch receiver or stud from a ceiling or other flat surface. It features four anchor points on the plate to ensure a solid and secure connection with nails, drywall anchors, or molly or toggle bolts. It’s ideal for mounting light fixtures that weigh up to 22 pounds while it preserves floor space in small work areas or studios.

Precautions ⚠⚡

• Securely mount the plate to the ceiling before use.
• Make sure that this product is intact and that there are no missing parts.
• Do not exceed the maximum load capacity.
• Load capacity is dependent on mounting hardware and ceiling construction.
• For best practice, a safety cable is always recommended.
• All images are for illustrative purposes only.

Product Overview

1. Safety cable eyelet
2. Mounting plate
3. Locking knob
4. Telescoping arm
5. Spigot lock
6. Two-way 5/8 in. receiver
7. Reversible 5/8 in. spigot with 1/4-20 and 3/8-16 threads

Setup Info

Attaching the Ceiling Mount to the Ceiling

1. Use the mounting plate to mark the position of the mounting holes on the ceiling.

2. Drill holes in the marked locations. Make appropriately sized holes for the plastic drywall anchors, metal concrete anchors, molly bolts, or toggle bolts. If you’re using drywall anchors, tap the anchors into the holes.
   Note: Many drywall anchors and molly bolts are self-tapping and don’t require a drill for installation.

3. Put the plate against the ceiling, and insert screws (for drywall anchors), molly bolts, or toggle bolts through the holes, and fasten them until they’re fully tightened, and the plate is secure.
   Note: When screwing the plate directly into a ceiling joist, make sure at least two screws are attached to the ceiling joist.

Product Mounting a Light and Accessories

The two-way receiver lets you mount a light horizontally or vertically.
The reversible spigot features a 3/8-16 thread on one end, and a 1/4-20 thread on the other. Use these threads to mount a ballhead, LED light, microphone, or light-shaping accessory.
For extra security, use the eyelet on the mounting plate to secure your light fixture with a safety cable.

Product Specifications

• Plate Dimensions 3.1 × 3.1 in. (7.9 × 7.9 cm)
• Arm Length 15 to 26 in. (38.1 to 66 cm)
• Load Capacity 22 lb. (10 kg)
• Tube Diameters 30 mm, 25 mm
• Mounting 5/8 in. (16 mm) Stud 1/4-20 male thread 3/8-16 male thread
• Mounting Hole Diameter 1/4 in. (6.35 mm)
• Material Aluminum, steel
• Color Matte black
• Weight 1.6 lb. (726 g)

Warranty

This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2022 Gradus Group LLC. All Rights Reserved.

References

• Gradus | Gradus Group
• Impact | Quality Studio Lighting Equipment & Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>