impact LSA-LW22P Locking Wheels User Manual
- June 7, 2024
- Impact
Table of Contents
LSA-LW22P + LSA-LW25P
22 and 25 mm Locking Wheel
INSTRUCTIONS
Thank you for choosing Impact.
The Impact Locking Wheel Set fits on most tripod or light stand legs with 22
mm (LSA-LW22P) or 25 mm (LSA-LW25P) diameter tubes. The wheels feature sturdy
construction, easy-to-operate wheel locks, and metal brake shoes that assure a
tight and secure connection. The three-inch rubber wheels are easy to roll,
even on thick carpeting, and won’t scratch wood or polished surfaces.
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Make sure everything is secure before proceeding.
- Make sure that this product is intact and that there are no missing parts.
- All images are for illustrative purposes only.
Specifications
| Connector Size: | LSA-LW22P: 0.9 in. (22 mm) LSA-LW25P: 1 in. (25 mm) |
|---|---|
| Wheel Diameter: | 3 in. (75 mm) |
| Locking Wheels: | Yes |
| Material: | Steel, polymer |
| Weight (set of 3): | LSA-LW22P: 2.9 lb. (1296 g) LSA-LW25P: 2.8 lb. (1287 g) |
Attachment Instructions
- Install the brake shoe by sliding it into the receiver’s notch. Make sure the post is at the bottom of the receiver.
- Fully insert the tripod leg into the receiver until it touches the post
- Tighten the knob until secure.
Locking and Unlocking the Wheels
To lock the wheels, press or step down on the locking lever.
To unlock the wheels, use your toe to push back the release tab on top of the wheel.
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. The Inoperability of the product or part(s) shall be determined
by the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit
www.impactstudiolighting.com or call
Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group. www.gradusgroup.com IMPACT is a registered trademark of the Gradus Group. © 2020 Gradus Group LLC. All Rights Reserved.
GG1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>