impact STS-DT-V2 Desktop Shooting Table Instructions
- June 7, 2024
- Impact
Table of Contents
STS-DT-V2 Desktop Shooting Table
STS-DT-V2
Desktop Shooting Table (24 × 36 in.)
INSTRUCTIONS
Introduction
Thank you for choosing Impact. The Impact STS-DT-V2 Desktop Shooting Table is newly designed for greater stability to help you shoot still-life and product photography. A translucent white plexiglass sheet offers glossy and matte sides, making it the ideal backdrop to capture only the subject in your image. The folding frame is easy to set up on a table or desktop, and the raised feet make it more stable on flat surfaces.
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Make sure that this product is intact and that there are no missing parts.
- Do not attempt to disassemble or repair this product.
- Do not over tighten or improperly thread any of the threaded fittings.
- Do not collapse the metal frame while the plexi glass sheet is attached.
- Be careful with your fingers when folding the metal frame.
- All images are for illustrative purposes only.
Contents Include
- Folding metal frame
- Two-sided plexiglass sheet (matte/glossy)
- Plexiglass hook with nut (×2)
- Wing nut (×2)
- Wing nut screw (×2)
- User manual 2
Specifications
Plexiglass dimensions – (W × H) – 24 × 36 in. (60 × 91 cm)
Box Dimensions – (L × W × H) – 35 × 24 × 4 in. (89 × 61 × 10 cm)
Weight – 6.9 lb. (3.1 kg)
Instructions
1. Unfold the frame, and stand it on its back. A
2. Choose the plexiglass’s glossy or matte side. With that side facing up,
fit the top of the plexiglass into the tabs at the top of the frame. B
3. Align the plexiglass’s side holes with the frame’s holes.
4. Insert a wing nut screw through the bottom of the frame, and screw it on until secure. Repeat on the other side.C
5. Remove the nut from a plexiglass hook. Insert the threaded tip of the hook
into the plexiglass sheet, and screw the nut back onto the hook. Repeat on the
other side. D
6. Bend the bottom edge of the plexiglass and secure the hooks around the
front bar of the metal frame. E Check the hooks’ nuts to make sure they’re
secure.
7. Stand the assembled shooting table on its feet, and remove the protective
plastic covering from the plexiglass.
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from
defects in materials and workmanship under normal consumer use for a period of
one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility
with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by
the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality
and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights that
vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at
212-594-2353.
IMPACT ®
A Gradus Group Brand
Product warranty provided by the Gradus Group.
www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group.
© 2021 Gradus Group LLC. All Rights Reserved.