FX Impact 177 Single Shot Loader User Manual
- May 15, 2024
- FX Impact
Table of Contents
FX Impact 177 Single Shot Loader
Specifications:
- Product: Single Shot Loader for .177 and .22 cal FX Impact
- Manufacturer: Rowan Engineering
- Compatibility: Fits on the right side of the rifle for normal magazine loading
Product Usage Instructions
Safety Precautions:
Safety is paramount. Always follow safe practices when handling your rifle. Ensure the rifle is un-cocked, safety catch is set to safe, and no pellets are loaded.
Fitting the Loader:
- Before fitting the loader, ensure you have read and understood the instructions fully. The loader can only be fitted from the normal magazine loading side on the right.
- The loader is attached similarly to the FX multi-shot magazine and can be secured in place with the rear twist lock.
Adjusting Pellet Grip:
A grub screw can be used to adjust the pressure on the pellet grip o-ring
to securely hold the pellet in the loading arm.
Opening and Closing:
Use the small lever on the side of the loader arm to open and close the
loader for inserting pellets.
Ready for Use:
Once fitted, the loader is ready for use with your rifle.
FAQ:
-
Q: How do I know if the loader is correctly fitted?
A: The loader should be securely attached from the right side and locked in place with the twist lock. -
Q: Can I use different calibers with this loader?
A: This loader is designed for .177 and .22 cal FX Impact rifles specifically. Using other calibers may not provide optimal performance.
Single Shot Loader .177 and .22 cal.
FX Impact
Thank you for your purchase. Please read these fitting instructions before using the loader.
Your kit should contain
- 1 off FX SSL
- 1 off 1.5mm allen key
Safety first
Observe safe practices when handling your rifle and follow the manufacturer’s safety instructions when doing so. Take extra care when working on your rifle. Ensure that the rifle is un-cocked and the safety catch is set to safe and is absolutely not loaded with pellets.
-
Before fitting the loader, please read and understand these instructions fully.
The loader can only be fitted from the normal magazine loading side on the right.
-
A grub screw can apply more or less pressure to swell the pellet ‘grip o’ring’ such that the pellet is gently retained in the loading arm.
-
Open and close is by using the small lever on the side of the loader arm
-
Once fitted, the loader is ready for use.