dyras AC-1090 Portable Air Conditioner Instruction Manual

dyras AC-1090 Portable Air Conditioner

Product Information

The product is a portable Bluetooth speaker that can be connected to any Bluetooth-enabled device such as a smartphone, tablet, or laptop. It features a rechargeable battery that can last up to 8 hours of continuous music playback and has a built-in microphone for hands-free calling.

Product Usage Instructions

1.  Charge the speaker using the included USB cable before firstuse.
2. Turn on the speaker by pressing the power button located on the side of the device.
3. Activate Bluetooth on your device and search for available Bluetooth connections.
4. Select the speaker from the list of available devices and pair them by following the on-screen instructions.
5. Once paired, you can start playing audio from your device, and it will be streamed through the speaker.
6. You can also answer calls by pressing the phone button on the speaker. The built-in microphone will allow you to talk hands-free.
7. To turn off the speaker, press and hold the power button until the LED indicator turns off.

GENERAL SAFE GUARDS

To reduce the risk of shock or injury, the following intermediate precautions must be taken to provide an intermediate stream of fire: Plug into a grounded outlet. Do not remove the grounding branch! Do not use an adapter! Do not use an extension cord. Unplug this exercise before cleaning. The essential move and equipment is at least two man-made jobs. This appliance is not intended for use by children over 8 years of age or by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning use of the appliance and are aware of the dangers involved. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision! If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Do not use any means other than those recommended by the manufacturer to speed up the defrosting process or to clean the appliance. Do not store the appliance in a room with continuous ignition sources, such as an open flame, a working gas appliance or a working electric heater. Do not drink the water collected in the tank or use it for anything else! The refrigerant in the appliance is an odorless gas. The appliance contains <70g R290 refrigerant gas. R290 refrigerant complies with the relevant European standards from an environmental point of view. Do not drill or cut the cooling system! Place the appliance on a horizontal, level surface. If the machine breaks down, contact the manufacturer and / or a workshop. Please read all instructions and safety warnings before use and keep them for future reference.

SPECIFICATION

PLACE THE APPLIANCE

INSTALL THE APPLIANCE

To avoid electromagnetic interference, keep the device at least 1 meter away from the TV or radio. Do not expose the device to direct sunlight to avoid surface damage/alteration. Do not tilt the unit more than 35 ° during transport or turn it upside down! Place the unit on a flat surface. Recommended use in 10m2 rooms. Empty the water tank after you have finished using the mobile air conditioner on a daily basis. Do not use chemical solvents (eg benzene, alcohol glaze) to clean the surface of the unit to avoid scratches and damage to the surface. Be sure to turn off the power before disassembling or installing the air intake grille! Please drain the water from the water tank if you want to move the machine!

Recommended placement:

• Beside a window and / or door.
• Keep at least 60 cm free behind / in front of the air outlet, ensuring the free flow of air.
• Make sure that warm air can flow freely in the air outlet pipe.
• Do not block the air inlets and outlets with any obstacle.

Install exhaust hose and adapter:

1. Extend the air exhaust duct by drawing out two ends of the duct.
2. Screw the air outlet pipe into the connector of air exhaust duct.
3. Screw the window baffle connector into the other end of the pipe.
4. Connect the air duct connector to the appliance.

USING THE APPLIANCE

How to install batteries

Open the back cover, take off the isolating film on the batteries. Put the batteries inside the slot, with “+” “-“ in right directions. Put on the back cover.
For long time no use, please take out the batteries.

Plug in the appliance.

Press to turn on the unit. LED displays the room temperature and operates in Auto mode. Select the operating mode by pressing

Auto mode: The indoor temperature sensor operates automatically to select the desired operation mode with Cooling or Fan, if roomtemperature under 24C° Fan mode will autamatically select If room temperature above 24C° Cooling mode will automatically start.

Dehumidifying mode: Fan run at low speed and compressor will stop after 8min,then restart after 6min. Unit adopts constant temperature dehumidifying mode, and the adjustment of temperature is no effective.

Cooling mode: When room temperature is higher than set temperature, the compressor starts.When room temperature is lower than set temperature, the compressor stop and fan operatea t original set speed.

Fan mode: Fan run at set speed, the compressor is not working. The adjustment of temperature is no effective.

Timer: Press ****to set timer with „up” and „down” buttons, Can be adjusted 1 to 24 hours.

mode: The sleeping mode operation is effective under Cooling mode is on.

Press ****button, then the unit will work with low fan speed. The temperature will auto set up by 1C°after 1 hour and 2C°after 2 hour. The unit auto stop after 6 hours. The device will auto shut down if room temperature is over 43C° or below 15C°. You need to wait 3mins before restart the unit after operation. If the plug is taken out Timer settings will lost.

Special reminder: there is condensing water recycling hidden within this unit. The condensing water is partly kept recycling between the condenser and the water plate. When the water level rises to the upper level, the float switch and water full indicator (E4) lights on to remind draining water. Please cut off the power supply, move the appliance to a suitable place, remove the drain plug, drain water completely. after the drain, re-install the plug, or the appliance may leak and make your room wet.

CLEANING AND MAINTENECE

TROUBLESHOOTING

WASTE MANAGEMENT

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

CE SYMBOL
The mark is intended to indicate that the product complies with the relevant European Union standards and can be freely marketed in the European Union.

www.dyras.hu

Copyright © 2022 The dyras wwe.factory LLC U.S.A.
No parts of the content (including logos, design, photos, text, colour scheem arrangements, etc.) may be reproduced, resued or redistrubuted for any purpose whatsoever, or distributed to a thirdparty for such purposes, without the written permission of The dyras wwe.factory LLC. ®= registered trademark of Dyras Europe Kft.

References

• Dyras | Fedezze fel a különbséget!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>