Nakamichi NAM1710 7 Inch 2-Din AV Receiver User Manual
- June 6, 2024
- Nakamichi
Table of Contents
NAM1710
User Manual
7″ 2-DIN AV RECIEVER
nakamichicaraudio.com|
nakamichi.golbal|
nakamichi.caraudio
---|---|---
Warning & Precaution
To avoid risk of serious injury or possible violation of laws, please read the following thoroughly before installation or connecting.
This symbol means important ban. Failure to heed them can result in serious
injury or death.| This symbol mean important instructions. Failure to heed
them can result in injury or material property damage.
---|---
Having the wiring and installation done by expert. The wiring and installation of this unit requires special technical skill ‘and experience. To ensure the safety, always connect the dealer where you purchased this product to have the work done.
Do not watch video or operate the unit while driving.| Be sure to use
specified accessory parts and install them securely.
---|---
Do not install in location which may hide vehicle operation, such as steering
wheel or gearshift or cover of airbag.| Be sure to check the installation of
antenna regular. Antenna dropping may result in an accident while the vehicle
is running.
Do not touch antenna or any plugs while in thunder storm to avoid electric
shock.| Be sure to disconnect the cable from the negative battery terminal
wile installation.
Do not damage wiring. Failure to do so may result in electric shock or fire
due to electrical shorts.| Be sure to use the correct ampere rating when
replace fuses. Failure to do so may result in fire of electric shorts.
FEATURES
- 2-Dinreceiver with capacitive panel
- 7-inch high-brightness and wide angle screen
- Support USB DVR
- Support Dual USB
- Support AHD Camera
- Support iOS phone mirrorlink
- Support android phone mirrorlink
- Built-DSP, support HPF,LPF
- Support Virtual bass
- Support time alignment
- Built-in 16 band EQ,Preset 7 sound effects
- Support lossless music
- Support 1080P video playback
- Support MP3/WMA/AAC/FLAC audio playback
- Support H264/WMV/DIVX/FLV video playback
- Built-in Bluetooth
- Support Bluetooth music playback
- Built-in multi-color lights
- Support subwoofer output
- Support subwoofer volume control
- 2 Video output
- 2 Audio output
- 4V Pre-output
- 3V Subwoofer output
- 1 Video input,2 Audio input
- Builf-in PAC jack
- Maximum power: 4x50W
- Support extermal microphone
- High sensitivity FM/AM, support RDS
- Support steering wheel button learning
ACCESSORY LIST
1. Power cable —————–1 PC
2. Remote controller ———-1 PC
3. User manual —————–1 PC| 4. Metal Card hokder———– 1 PC
5. SCIOW:SXB ————22–2—BPCS
6.12P Expansion —————- 1 PC
---|---
WIRING DIAGRAM
PANEL OPERATION
1. Microphone: Voice receiving position
2. Remote control windows
3. Volume up
4. Volume down
5. Power| 6. Home page
7. Back to previous
8. Reset Key
9. USB interface
---|---
REMOTE CONTROL OPERATION
HOME PAGE OPERATION
Press on the panel to enter the homepage, the homepage is displayed as follows:
LCD Brightness setting | Setting | Phone Mirrorlink |
---|---|---|
Current volume | Page | Aux input |
Current time | Return | DSP setting |
Voice operation | Radio | Setup |
Bluetooth connected | Bluetooth | Steering wheel learning |
SD card inserted | USB playback | |
USB inserted | SD Card playback |
RADIO OPERATION
Radio Interface
Forward
Band selection
Automatic search
Stereo switch| Backward
DX/LOC switch
Frequency input
DSP setting
---|---
Radio Area Selection
1. Press [ ] toenter the homepage.
2. Click [ ] to enter setting interface.| 3. Click [ ] to select [ Radio
Area J.
4. Select the corresponding radio area.
---|---
Automatic Search
Press and hold the [ ]for more than 2 seconds, the radio stations that have been searched will be automatically saved the number list below.
Rds Function
1. Press [ ] to enter the homepage.
2. Click [ ] to enter setting interface.
3. Click [ ] to select [RDS]open.
BLUETOOTH OPERATION
The first time pair mobile phone with AV receiver, please follow below steps:
1. Press [ ] to enter the homepage.
2. Click [BT] to enter the Bluetooth interface.| 3. Click [ ] fo enter the
Bluetooth pairing.
4. Turn on the phone’s Bluetooth to search: Bluetooth device: NAM1710.
---|---
Call Interface
Dialpad
History call record
Phone book
Bluetooth Music| Bluetooth Pairing
Backspace
Delete
Answer
---|---
Call Record
Phone Book
Bluetooth Music Playback
1|. Press [ ] to enter the homepage.
2. Click [BT] to enter the Bluetooth interface.
3. Click [ ] to enter the bluetooth music playback.| Previous track at
Play/Pause
Next track
---|---
PHONE MIRROR LINK OPERATION
Remarks:
-
Before the mirrorlink operation, the Bluetooth must be paired and connected. When the Bluetooth is not connected, there will be no sound.
-
Only the front USB supports miorrlink.
-
Press [ ] to enter the homepage .
-
Click [Autolink ] to enter the phone mirrorlink interface.
Mirrorlink Interface
Android Phone Mirrorlink
- Click [ ] to enter the android phone mirrorlink
- can QR code to download the Autolink APP(First connection}
- Please connect the phone to the headunit via USB cable.
- Please click trust on your phone.
Remork:
Some mobile phones need to turn on the USB debugging mode.
los Phone Mirrorlink
- Click [ ] to enter the iOS phone mirrorlink
- Please connect the phone to the head -unit via USB cable.
- Please click trust on your phone.
MULTIMEDIA OPERATION
Music Playback
Playlist
Play/Pause
Repeat Playback
Previous track| Next track
Random Playback
Currently playing track/total track
---|---
Video Playback
Previous Video
Repeat playback
DDP Settings
Currently Playing video/total video| Play/Pause
Random payback
Brightness Settings
Page| Next Video
Zoom in/zoom out
Playlist
---|---|---
Picture Playback
Previous Picture
Zoom in/zoom out
Random payback| Play/Pause
Rotate
Page| Next Picture
Repeat playback
---|---|---
DSP SETTING
- Press [ ] to enter ihe homepage.
- Click [ DSP] to enter the DSP interface.
Vbass: virtual bass settings
Balance: Fader and banlance settings
Emperor: time alignment settings| EQ: EQ and Sound effect settings
Loundness: Loundness settings
Filter: HPF and LPF filter settings
---|---
SETTINGS
- Press [ ] to enter the homepage.
- Click to enter setting interface.
Key Lights Settings
Display Settings
Steering Wheel Learning
- Click [SWC] to enter the steering wheel learning interface.
- Click[ PAC ], Display [SWC]
- Press and hold the steering wheel control button for 3s.
- Click the button function on the screen. The learning success button turns gray
- Click[√] to enter the save.
USB DVR
Photograph
Start the video
Lock Video Files 9
Video recording
Set up| HE Set recording time
Resolution settings
Formatted SD card
---|---
Remarks:
NAM1710 only supports our specific DVR model.
TROUBLESHOOTING
FAULT | REASON | SOLUTION |
---|---|---|
Unable to boot | Power supply fuse burned out | Replacement of the same type of |
fuse
Other factors cause microprocessors to work abnormally| Reboot the unit using
the reset button. Press the reset button with a pointed object.
When the ignition switch is turned off, all the information of setting is
lost.| Replacement of batteries or fuses| Reset the information and restore if
after replacing the fuse or batteries
The radio is ineffective| Weak radio signal| Try again in a different location
No image| Other factors cause microprocessors to work abnormally| Reboot the
unit using the reset button. Press the reset button with a pointed object
Silent output| Small voice| Increase the volume
Output line incorrectly connected| Check Output Line Connection
Do not connect the speaker leads of the power cord to the car battery; otherwise. the unit will be seriously damaged.
BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker winng in your car.
SPECIFICATION
General
Operation Voltage: 14.4V(10.5-16¥V)
Product Size: 178 x 100 x 70mm
Panel Installation Size: 178 x 100mm 170 x 96mm
Operationg temperature: -10C- +60C
Storage Temperature: -20C- +70C
Net Weight: 800g
TFT Screen Item
Size: 7″
Display Resolution: 800 x 480
Contrast ratio: 400
Brightness:400nit
Bluetooth
Communication System:
BT4.0+EDR
Frequency Band: 2.4GHz
Max Range: 5m
Audio
Max Power: 4x50w
Front Output(V): 4V/10KQ
Pre-output impedance: <600Q
Speakers impedance: 4-8Q
Video
External Video Input System:
NTSC/PAL/SECAM
External Video Input: 1VP-P/75Ω
Video Format
H264/ MP4/ AVI/ MKV/ FLV
Audio Format
MP3/APE/AAC/FLAC
USB Interface
USB: Readable/ Chargeable
(5+0.25V/1A)
Radio
FM Frequency: 87.5-108.OMHZ
AM Frequency: 522-1620KHZ
SCAN OUR QR CODE OR VISIT
WWW.NAKAMICHICARAUDIO.COM
FOR COMPLETE AUDIO SETTINGS INSTRUCTIONS
nakamichi.global|
nakamichi.caraudio
---|---
Made in china
Documents / Resources
|
Nakamichi NAM1710 7 Inch 2-Din AV
Receiver
[pdf] User Manual
NAM1710, 7 Inch 2-Din AV Receiver
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>