D-Link DUB-2315 USB-C to 2.5 Gigabit Ethernet Network Adapter Installation Guide
- June 11, 2024
- D-Link
Table of Contents
D-Link
DUB-2315
USB-C to 2.5 Gigabit Ethernet Network Adapter with USB-A to USB-C Adapter
Quick Installation Guide
Package Contents
- DUB-2315 network adapter
- USB-A to USB-C adapter
- Quick Installation Guide
- Warranty documents
Minimum Requirements
PC or laptop with:
- Windows 7/8/8.1/10, macOS (OS X 10.8 and above)
- USB Type-C port or USB 3.0 Type-A port*
- Using a USB 1.1 or USB 2.0 port will affect device performance. USB 3.0 port is recommended.
Hardware Overview
Interfaces
Figure 1
| Number | Item | Description |
|---|---|---|
| 1 | USB Type-C connector | Connect to laptop or desktop computer |
| 2 | 2.5 Gigabit Ethernet port | Connect to switch/router |
| 3 | Enclosure | Aluminium enclosure |
Table 1
Figure 2
| Number | Interface | Description |
|---|---|---|
| 1 | USB 3.0 Type-A connector | Connect to laptop or desktop computer |
| 2 | USB Type-C port | Connect to the DUB-2315 network adapter |
Table 2
LED Indicators
| LED | Status | Description |
|---|---|---|
| Speed 1 | Flashing green | Data transmission at 100 Mbps or 1000 Mbps |
| Speed 2 | Flashing orange | Data transmission at 2.5 Gbps |
Table 3
Product Setup
-
Plug the USB Type-C cable of the DUB-2315 into available USB Type-C port on your computer. If your computer does not have USB Type-C port, plug the additional adapter into available USB 3.0 Type-A port on your computer. Then plug the USB Type-C cable of the DUB-2315 into the USB Type-C port on the additional adapter.
-
Run the setup file in the opened folder to begin the DUB-2315 driver installation.
Note: if the folder containing the setup file is not opened automatically, please open it through a file manager and run the setup file. -
Attach an Ethernet cable to the Ethernet port on the DUB-2315 and to your network switch, hub or router.
Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.