Dainolite ARL-3724LEDW-AGB LED Lamp Instruction Manual
- May 15, 2024
- Dainolite
Table of Contents
ARL-3724LEDW-AGB
Warning/Attention
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
IMPORTANT SAFETY INSTRUCTIONS
-
The LED bulb has been permanently installed into this lamp.
The LED bulb does not need to be replaced. Do no attempt to remove or replace the LED bulb. -
Although LED bulbs do not get as hot as traditional light bulbs, they still generate some heat. Avoid touching the LED bulb.
-
Do not try to modify the plug, cable, adaptor or LED bulb.
-
Use a soft cloth when cleaning the lamp. Do not use chemical or abrasive cleaners
-
These important safety warnings do not cover all possible conditions or situations that may occur. Please take care when using this product.
Do Not Return Product To The Retailer
For Warranty:
Contact the factory directly in writing: Email
[email protected]. Include a copy of
your purchase invoice and describe the defect. A factory person will contact
you directly to advise what further action will be taken.
DIMMER
MODEL #: ARL-3724LEDW-AGB
This product may only be dimmed using dimmer models:
LUTRON : DVELV-300P
LUTRON : MA-PRO LED +
LUTRON : MAELV -600
LEGRAND : ADTH700RMTU Using any other dimmer will void this product’s
warranty.
1401 Courtney Park Drive East, Missisauga, Ontario, Canada L5T 2E4
Tel: (905) 564 -1262 Fax: (905) 564 -1299 Email:
[email protected] Web: dainolite.ca