Lyra BeBa-27586 Bathroom Mirror Installation Guide
- June 9, 2024
- Lyra
Table of Contents
Lyra BeBa-27586 Bathroom Mirror
parts list
Installation tools
Installation Instructions
Check the product for damage prior to installation, damage reported after installation will not be covered.
- Please fit the connectors to the front frame using the screws
- Then connect this to the other section of the frame using the screws
- Place the hanging bar against the wall ensuring it is level and mark the drill holes; Drill the wall and insert the wall plugs and tap flush with wall surface; Place the hanging bar over the drilled holes and fix into place using the screws provided (If suitable)
- Hang the mirror onto the hanging bar; Locate the anti-pull fitting onto the underside of the mirror and mark this position
- Remove the mirror and place the anti-pull fitting against the mark and then mark the drill hole; Drill the wall and insert the wall plug and tap flush with the wall surface.
- Slide into the recess inside the mirror as shown
- Re-hang the mirror and align it with the anti-pull fitting; Fit the screw to secure the mirror to the anti-pull fitting as shown
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>