Magimix 11643 Power Blender 5 Connect Instruction Manual
- June 9, 2024
- magimix
Table of Contents
Blender
POWER
Instruction Manual
11643 Power Blender 5 Connect
A dedicated app 100% free and evolving, available on Apple and Android
SAFETY INSTRUCTIONS
RISK OF BURNS
- NEVER process hot ingredients (solid or liquid) in the BlendCups or mill attachment, as blending hot foods in a lidded jug can lead to a build-up of pressure, forcing out scalding steam or liquids.
- Processing hot foods in the 1.8l jug: blending hot ingredients at high speed can lead to a build-up of pressure, forcing out scalding steam or liquids. Always take care when pouring in a hot liquid, as it may suddenly boil up and escape from the jug.
- Never introduce hot ingredients (solid or liquid) if they are over 60 °C in temperature. Always make sure the lid is firmly fitted but the measuring cap is only loosely positioned, to allow any steam to escape. Always use the SOUP programme or start at a low speed and gradually increase it. Never use the PULSE button.
MAINS CONNECTION
- Your appliance must be connected to an earthed socket with the original power cord.
- Check that the voltage indicated on its identification plate corresponds to the voltage of your mains supply.
- Never allow the power cord to dangle over the edge of your worktop or counter, and make sure that it does not come into contact with hot surfaces.
AFTER-SALES SERVICE
- If the power cord has been damaged, it must be replaced by the manufacturer, a Magimix-approved service agent or a similarly qualified person, in order to avoid all risks.
- The use of parts that are not recommended or sold by Magimix may result in injury, fire or electric shock.
KEEP THESE SAFETY INSTRUCTIONS FOR FUTURE REFERENCE
DESCRIPTION
Carefully wash all the parts (except the motor unit) before using for the first time.
ATTACHMENTS*
Mill attachment**
Glass mill attachment ideal for grinding spices or Parmesan, and making small
amounts of savoury dips.
Mill supplied with a special blade assembly for processing dry ingredients.
See p. 30.
BlendCups
** Compact blend-and-go jugs (400 & 700 ml) for blending small amounts and/ or
carrying around homemade drinks. Compatibe with the 1.81 jug’s blade assembly
Seep. 31.
Citrus press
This attachment slots onto the blender lid, so that you can easily prepare
citrus juices and add them directly to your preparations. See p. 33. Blender Kit**
A premium box containing: 2 BlendCups (400ml & 700m1), with 1 watertight lid
and 1 easy grip handle 1 Mill attachment, with a blade assembly and shake and
pour lid
- Depending on the model / attachments sold separately
** Solely for cold preparations.
CONTROL PANEL
- Switching your appliance on: first select a speed or programme, then press AUTO.
- Manual mode: always start at the slowest speed and gradually increase it.
- Never run continuously for more than 60 seconds.
- PULSE: maximum speed for an even smoother texture / pulsing to give you complete control.
PRE-SET PROGRAMMES
5 pre-set programmes of cycles and speeds to ensure the best result every time. As these programmes are for use with the 1.8l jug, please read the instructions on how to adapt them to the other jugs.
| | 1.8l jug| BlendCup| Mill
attachment
---|---|---|---|---
| Cleaning
Automatic rinsing programme| | |
| Crushed glass
For crushing ice| | |
| Drinks
For blending milkshakes, smoothies and cocktails| | |
| Soups
For making puréed soups and cream soups (hot or cold)| | |
| Frozen desserts
For making instant desserts (using frozen fruit) and mixing or puréeing dense
and compact ingredients| | |
The lengths of the cycles have been established on the basis of the maximum
blender capacities (see p. 26).
You can stop the programme before the end of the cycle if you are processing
smaller amounts or prefer a coarser texture.
BLENDER CAPACITIES
To make best use of your appliance, please follow the recommendations below:
| 1.8l jug| BlendCup| Mill attachment
---|---|---|---
Dried breadcrumbs| x| x| 3 breakfast rusks (30g)
Sp 4, 14 s
Fruit compote| 500g chilled cooked fruit Sp 1, then Sp 3 + spatula| x| 200g
chilled cooked fruit
Sp 1 then Sp 3
Frozen desserts| 300g frozen fruit (2cm cubes)
Desserts + spatula| x| x
Ground spices| x| x| 100g
Sp 4, 20 s
Coffee beans| x| x| 80 g
Sp 4, 40 s
Crushed ice| 300g
(approx. 15-20 ice cubes)
Ice| x| x
Milkshakes| 1.6l
Smoothies| 0.4l or 0.7l
Smoothies| x
Walnuts, almonds| x| x| 100g
Sp 3, 20 s
Onion| 200g Sp 1 30 s
+ spatula| x| 100g
Sp 1, 30 s
Parmesan| x| x| 80g (2cm cubes)
Sp 4, 50 s
Pancake batter| 1l Sp 3, 10 s
+ Sp 4, 20 s| x| x
Puréed vegetables| 200g chilled cooked vegetables
Sp 1, 50 s| x| 200g chilled cooked vegetables
Sp 1, 50 s
Smoothies| 1.8l
Smoothies| 0.4l or 0.7l
Smoothies| x
Hot soups| 1.6l
Soups| |
Icing sugar| x| x| 200g caster sugar
Sp4 + Pulse, 60 s
Raw meat| x| x| 130g (2cm cubes)
Sp 4 10 s
A blender is not designed to knead dough or mash potatoes.
Whatever the attachment or recipe concerned, the blender must not be used
continuously for more than 60 seconds.
USING YOUR BLENDER
-
Assemble the base
Place the seal on the rim of the blade assembly, makingsure it is completely flat.| Position the blade assembly on the underside of the jug.| Screw the holder tightly onto the blender jug.
-
Assemble the jug
Place the upright jug on the motor unit.| Add the ingredients (max. 1.8l).| Push the lid down firmly into place. Loosely position the cap.
-
Blend
Select a speed or programme. Press AUTO.| If necessary, use the spatula to help with the
mixing.| Wait until the blades have completely
stopped moving before opening.
ADVICE
Ice / frozen or sticky ingredients such as honey, banana and avocado
Fresh fruit and vegetables except for banana and avocado
Leaves, herbs such as spinach and fresh herbs
Hard or dry ingredients such as cereals, nuts and carrots
Liquids such as water, milk and fruit juice
For the best possible result:
- Cut the food into chunks measuring approx. 2cm.
- Coarsely chop the herbs or leaves before adding them.
- Always add the ingredients in the order specified in the recipe.
- When processing thick mixtures, always start at a low speed, otherwise the food will stick to the sides and not come into contact with the blades. If necessary, add a little liquid and use the spatula.
- To add ingredients, either remove the measuring cap or stop the machine and remove the lid.
- Never run your blender if the jug is empty. To process dry ingredients such as nuts and spices, we recommend using the mill attachment, which has a specially designed blade assembly.
Never fill above the MAX mark.
Never add solid or liquid ingredients if they are above 60°C in temperature.
Tips
- Hot soups: wait for the ingredients to cool to 60°C (tasting temperature) before blending. Make sure that the measuring cap is only loosely positioned on the lid, to allow any steam to escape. Either use the SOUP programme or start at a low speed and gradually increase it. Never use the PULSE button.
- Crushed ice: the ICE function reduces ice cubes to a very fine, snow-like powder. If you want more coarsely crushed ice, put a small number of ice cubes (100/150g max.) in the jug and use the PULSE button.
- To fold ingredients into a mixture without chopping them (e.g. chocolate chips in a cake mixture), add them at the end and run your blender for a further 5-10 seconds at a slow speed (0.5).
- Using frozen fruit: when fruit come out of the freezer it sometimes forms a solid block. Break this block into cubes measuring roughly 2cm before putting in the jug, to avoid damaging your blender.
- To rescue a lumpy sauce, blend it for 15 s at Speed 3.
Automatic overload failsafe
Your appliance is fitted with a safety system that cuts the motor if it is
overloaded or has been running for too long. The indicator light then starts
to flash.
- Turn to the selector to 0 and unplug your appliance.
- Wait for about 30 minutes before restarting your blender.
- Reduce the amount of ingredients in the jug and/or add some liquid.
MILL ATTACHMENT
-
Assemble the base
Place the seal on the rim of the blade assembly, making sure it is completely flat.| Put the ingredients in the mill attachment. Position the blade assembly on the mill attachment.| Screw the holder tightly onto the mill attachment. Screw the holder tightly
-
Assemble the jug
Place the upright mill attachment on the motor unit.| Press down with your hand to check that it
is ready to run.| Select a speed and press AUTO
- Instant crumble: crush digestives or butter biscuits and divide between fruit salad / ice cream verrines.
- Icing sugar: pour in 200g caster sugar. Blend for 1 min at Speed 4. For an even finer consistency, blend for a further minute.
- Cake icing: pour 200g icing sugar into the jug with 1 egg white. Blend for 20 s at Speed 1.
Never blend hot liquids. The blade assembly can be extremely hot after use.
BLENDCUPS
- Add the ingredients
Liquids
water, milk, fruit juice
Frozen foods or sticky ingredients
honey, banana, avocado Hard or dry ingredients cereals, nuts, carrots Leaves,
herbs spinach, fresh herbs
Fresh fruit and vegetables except banana and avocado
For the best possible result:
- Cut the ingredients into small chunks (approx. 2cm)
- Roughly chop leaves or herbs before adding to the jug, especially if they are large or thick
- Always add the ingredients in the right order
- Always add a little liquid
- Use ice cubes (max. 4 cubes) rather than crushed ice
Never use hot liquids
Never fill above the MAX level
Never put the BlendCups in the microwave
Do not use sparkling liquids in the BlendCups
2 Assemble the base
Position the seal on the rim of the blade assembly, making sure it is completelyflat.| Place the blade assembly on the jug.| Screw the holder tightly onto the jug.
3 Blend
Place the BlendCup on the motor unit (locking pins at the back).| PRESS on the
BlendCup to activate
the blender.| Select a speed or programme and
press AUTO.
4 Drink immediately or take away.
Wait until the blades have completely
stopped moving.| Remove the BlendCup.
Unscrew the holder.| If necessary, screw on the lid.
BLENDCUPS
Tips and advice
- Run at a low speed for the first few seconds, until all the ingredients are caught up in the blades, then gradually increase the speed.
- Never run the blender continuously for more than 1 minute, otherwise the ingredients may heat up and pressure may build up inside the jug.
- If blending is difficult, reduce either the speed or the amount being processed. If the preparation is thick, add some liquid (without going above the MAX mark).
- Dense or sticky (e.g. nut-based) preparations tend to stick to the sides. If this happens, switch the blender off, wait until the blades have come to a complete standstill and shake the jug downwards to send the ingredients back towards the blades.
- The base of the jug is shaped to fit the cupholder in your vehicle.
CITRUS PRESS
Slot the citrus press onto the lid.| Turn until it locks into place.| Press then remove.
CLEANING
Automatic cleaning programme
As soon as you have finished using your appliance, fill the jug up halfway
with warm water + few drops of washing-up liquid. Close the lid tightly,
select the CLEAN programme and press AUTO.
Thorough cleaning
- Unplug the appliance and remove all the parts, not forgetting the seals.
- All the parts are dishwasher safe (except motor unit): use the short cycle and place all the small parts on the upper rack.
- For the best results, we nevertheless recommend washing the lid and the seals by hand.
- Never leave the blade assembly to soak, and check that the blades move freely before reassembling.
- Clean the base with a damp cloth.
Unscrew the holder with the aid of the spatula.| The top of the measuring cap can be removed.| Check that the locking pins slide smoothly, and clean them if necessary.
Electrical and electronic goods at the end of their lifetime
It is against European law to treat electrical and electronic equipment (WEEE)
as regular household waste. Your appliance contains many materials that can be
recovered or recycled. It should be taken to a WEEE collection point. For more
details about collection points, please contact your local council or your
household waste recycling centre. You can also take your appliance to an
electrical goods store.
Problem | Solution |
---|---|
The lid is stiff | As the lid is designed to be watertight, it can be a little |
hard to fit, especially if the appliance is new or has not
been used for a long time. Pour a little vegetable oil onto some kitchen paper
and rub the seal
Flashing light| Jug or attachment incorrectly positioned Motor overload:
switch your appliance off and wait for 30 minutes before switching it back on
Your appliance will not start| Check the plug/socket
If the white indicator light is on, reposition the jug, then select a speed or
programme and press AUTO
The ingredients are not properly mixed/blended| Add some liquid
Always add the ingredients in the right order
Glass jug: use the spatula
Cut the ingredients into smaller pieces
Leaking base| Check that the blade assembly seal is correctly positioned
Check that the support is screwed on properly to the base of the jug
Glass jug: use the spatula
Desserts programme does not work| Frozen fruit: break into cubes measuring
roughly 2cm before putting in the blender, to avoid damaging your
appliance
Do not exceed the blender capacity and add a little liquid
Use the spatula
The motor smells| There may be a faint smell when you use your appliance for
the first time or if the motor is overloaded. This poses absolutely no risk,
and the smell will go away after you have used your appliance a few times.
Allow the motor to cool for 30 minutes before restarting it
Stained plastic parts| Some ingredients, such as curry and carrots, may give
rise to some staining. Pour some vegetable oil onto
kitchen paper and rub the parts before adding the ingredients
The mixture tends to stickto the sides| Add some liquid
Use the spatula, start at a low speed and gradually increase it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>