milwaukee M18 FCHS35-0 Cordless Chainsaw Instruction Manual
- June 9, 2024
- Milwaukee
Table of Contents
milwaukee M18 FCHS35-0 Cordless Chainsaw
Product Information
The product is a replacement saw chain designed for use with the following models:
- M18 FCHS
- M18 FCHS35
- M18 FCHSC
- M12 FHS
- M18 FTHCHS30
- M18 FTHCHS35
The saw chain comes in four lengths:
- 16 inches (406 mm)
- 14 inches (356 mm)
- 12 inches (305 mm)
- 6 inches (152 mm)
The saw chain has different specifications depending on the model it is used with, including chain teeth (drive length), chain pitch (low profile), bar groove width (gauge), and chain type (low kickback).
Product Usage Instructions
- Read the operator’s manual before using the saw chain.
- Set the chain brake to the BRAKE position before starting any work on the appliance.
- Wear gloves and safety glasses while using the saw chain.
- Remove the battery pack before starting any work on the appliance.
Installation
Replacement Low Kickback Saw Chain
For use with| M18 FCHS| M18 FCHS35| M18 FCHSC| M12 FHS| M18 FTHCHS30| M18
FTHCHS35
---|---|---|---|---|---|---
Bar length max.| 16“(406 mm)| 14“(356 mm)| 12“(305 mm)| 6“(152 mm)| 12“(305
mm)| 14“(356 mm)
ChainTeeth (Drive Length)| 56| 52| 45| 28| 51| 59
Chain Pitch (Low Profile)| 3/8“ (9,5 mm)| 0.325“ (8,3 mm)
Bar GrooveWidth (Gauge)| 0.043“ (1,1 mm)
ChainType| Low Kickback
Safety Instruction
For intended use, safety, and maintenance information, refer to the original instructions of the device.
-
Read the operator‘s manual.
-
CAUTION! WARNING! DANGER!
-
Remove the battery pack before starting any work on the appliance.
-
Set the chain brake to the BRAKE position.
-
Wear gloves!
-
Use safety glasses.
Contact Information
Copyright 2022
Techtronic Industries GmbH
Max-Eyth-Straße 10 71364 Winnenden Germany.
+49 (0) 7195-12-0
www.milwaukeetool.eu.
Techtronic Industries (UK) Ltd
Parkway Marlow, SL7 1YL UK.
4931 4252 44
961014309-01(A)