Chicco Trio Mysa i-Size Pushchair Instruction Manual
- June 9, 2024
- chicco
Table of Contents
- Chicco Trio Mysa i-Size Pushchair
- Product Information
- Product Usage Instructions
- IMPORTANT
- PRODUCT CONFIGURATIONS
- DESCRIPTION OF THE COMPONENTS
- INSTALLATION AND REMOVAL OF THE I-SIZE BASE
- WARNINGS ELECTRICAL PARTS
- CONFORMITY WITH EU DIRECTIVE
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Chicco Trio Mysa i-Size Pushchair
Product Information
The Base Kiros Evo i-Size is a product designed for use with compatible i-Size car seats. It comes with Isofix connectors, an extraction lever for the connectors, an indicator for the correct attachment of the seat, a support leg with an adjustable height and an indicator for the correct installation of the support leg, and a rebound bar. The product should be used according to the instructions provided in the user manual to ensure the safety of children.
Product Usage Instructions
Before using the product, remove all plastic bags and other packaging elements and keep them away from children. To install the Base i-Size, follow these steps:
- Remove the plastic cover from the support leg.
- Extract the support leg (Fig. A) and ensure compatibility with the Alysia stroller or other compatible strollers.
- Completely extract both Isofix connectors (A) of the base by pulling the extraction lever (B) (Fig. 2) and ensure that the system is fully extended.
- Position the Base i-Size on the selected seat in the car.
- Insert both Isofix connectors into the car’s Isofix anchorage points until they click into place.
- Adjust the height of the support leg by pressing the adjustment button (H) until it reaches the car’s floor and ensure that the indicator (I) shows that it is correctly installed.
- Attach the car seat to the Base i-Size by following the manufacturer’s instructions for the specific car seat model.
To remove the Base i-Size, follow these steps:
- Press the adjustment button (H) of the support leg to shorten it until it is fully retracted.
- Lift the extraction lever of the Isofix connectors (B) to release the base from the car’s backrest.
- Press the release buttons (D) to detach the Isofix connectors from the car’s anchorage points.
Do not use the product beyond five years after purchase, as material alterations due to exposure to sunlight or other factors may reduce its effectiveness. Dispose of the product in accordance with local regulations and separate different types of waste to respect the environment.
IMPORTANT
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
VERY IMPORTANT! TO BE READ IMMEDIATELY.
IMPORTANT: READ CAREFULLY THE ENTIRE INSTRUCTIONS BOOKLET BEFORE USE IN ORDER TO AVOID RISKS WHEN USING THE PRODUCT AND STORE IT FOR FUTURE REFERENCE. FOLLOW THESE INSTRUCTIONS CAREFULLY IN ORDER NOT TO COMPROMISE YOUR CHILD’S SAFETY.
WARNING: BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN. IT IS RECOMMENDED TO DISPOSE OF THESE ITEMS AT A SEPARATE WASTE SORTING COLLECTION POINT, AS REQUIRED BY REGULATIONS IN FORCE.
DO NOT use the product for more than 5 years. After this period, alterations of the materials (e.g., due to exposure to sunlight) may reduce or compromise the product’s effectiveness.
PRODUCT CONFIGURATIONS
The i-Size Base is approved for use with the following child car seats:
- Kiros Evo i-Size Clip-On and Kiros i-Size Clip On (Fig. A) compatible with the Alysia stroller.
- Kiros Evo i-Size Fast-In and Kiros i-Size Fast-In (Fig. B) compatible with the Best Friend stroller and with other strollers in the Chicco range. These instructions refer to the installation of the i-Size Base in the car; to install compatible seats, refer to the manual of each child car seat.
- This is a base for a Chicco i-Size car seat, approved according to UN/ECE Regulation R129, for use in vehicles with “i-Size compatible” seats as indicated by the car manufacturer in the car instruction manual and the vehicle compatibility list.
- In case of doubt, please contact the child car seat manufacturer or dealer.
- The vehicle compatibility list can be found in the product sheet online or by scanning the QR code on the last page of this manual.
- WARNING! Serious Danger! Do not install the child car seat on seats where the airbag is activated.
DESCRIPTION OF THE COMPONENTS
- A. Isofix connectors
- B. Isofix connector removal lever
- C. Isofix system connection indicators
- D. Isofix connector release buttons
- E. Child car seat fastening slots
- F. Child car seat correct fastening indicator
- G. Support leg
- H. Support leg height adjustment button
- I. Leg support correct installation indicator
- J. Rebound bar
INSTALLATION AND REMOVAL OF THE I-SIZE BASE
Proceed as indicated to install the i-Size base:
-
Remove the plastic cover from the Support Leg (Fig. 1).
-
Extract the Support Leg (G) (Fig. 1A). An acoustic signal will activate and stop when the i-Size base has been installed correctly.
-
Completely extract both Isofix connectors (A) of the base by pulling the connector extraction lever (B) (Fig. 2). Make sure that the system is extracted to the end stop.
-
Position the i-Size base on desired seat and fasten the Isofix connectors to the anchorage points found between the backrest and the vehicle seat (Fig. 3). You will hear a “click” when the connectors fit into place.
WARNING! Make sure that the connection was made correctly by checking that the two indicators (C) are green. -
Push the i-Size base firmly against the back rest of the vehicle seat (Fig. 4) to make sure it is securely in place.
-
Check that the two connectors are fastened correctly by trying to pull the base multiple times.
-
Position the Support Leg (G) and adjust it using the adjustment button (H) (Fig. 5).
-
When the support leg is installed correctly, the acoustic signal will stop and at the same time, the indicator (I) will turn green (Fig. 6).
REMOVAL
Press the support leg adjustment button (H) and shorten it to the end stop.
Lift the ISOFIX connector extraction lever (B) and move the base away from the
backrest to the end stop. Release the ISOFIX connectors by pushing the release
buttons (D) (Fig. 7). Hold down the ISOFIX connector extraction lever (B),
push the ISOFIX base into the base, making sure to reach the end stop. Turn
the support leg and fasten the feet in the provided slot, deactivating the
acoustic signal.
WARNINGS ELECTRICAL PARTS
- To replace the battery: loosen the screw located on the foot of the support leg (Fig. 8), open the cover (Fig. 9), remove the drained battery from the compartment, insert the new battery, making sure that the correct battery polarity is observed (positive pole facing upwards) (Fig. 10), refit the cover and tighten the screw fully.
- Batteries must only be replaced by an adult.
- Use a 3V, CR 2032 battery similar to the type recommended for the operation of this product.
- Always keep batteries and tools out of reach of children.
- Always remove flat batteries from the product to prevent any possible liquid leaks from damaging it.
- Do not throw dead batteries into a fire or leave them in the environment; they must be disposed of through waste sorting.
- If the batteries are leaking liquid, replace them immediately, making sure to clean the battery compartment; thoroughly wash your hands if they have come into contact with the liquid.
- Always dispose of leaking batteries immediately: they can cause burns or other types of injuries.
- Prevent the electric part from coming into contact with water or fluids; water will damage the electronic circuit.
DISPOSING OF THE PRODUCT
When the child car seat no longer complies with the original safety standards,
stop using it and dispose of it at an appropriate collection point. Dispose of
the child car seat always following environmental rules and regulations
adopted within the country of use.
CONFORMITY WITH EU DIRECTIVE
2006/66/EC as amended.
The crossed bin symbol on the batteries or the product packaging indicates
that, at the end of their life, they must be disposed of separately from
domestic waste, either by taking them to a separate waste disposal site for
batteries or by returning them to your retailer when you buy similar
rechargeable or non-rechargeable batteries. Chemical symbols (Hg for mercury,
Cd for cadmium, Pb for lead) printed beneath the crossed-out wheeled bin
symbol indicate the type of substance contained in the battery. The user is
responsible for taking the batteries to special waste disposal sites at the
end of their life so they can be processed and recycled. The correct separate
waste disposal of your old toy will help prevent potential negative
consequences for the environment and human health and favour the recycling of
the materials of which the product is made. Illegal disposal of the product by
the user will damage the environment and human health. For further information
regarding the waste disposal services available, contact your local waste
disposal agency or the shop where you bought the appliance.
WARRANTY
The product is guaranteed against any conformity defect in normal conditions of use as stated in the instructions. Therefore, the warranty does not apply in the case of damage caused by improper use, wear or accidental events. For the duration of warranty on conformity defects please refer to the specific provisions of national laws applicable in the country of purchase, where provided for.
ARTSANA UK Ltd.
2nd Floor
1 Imperial Place
Maxwell Road
Borehamwood
Hertfordshire – WD6 1JN
01623 750870 (office hours)
www.CHICCO.uk.com
ARTSANA S.p.A.
Via Saldarini Catelli, 1
22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111
Fax (+39) 031 382 400
www.CHICCO.com
References
- Chicco
- Site Officiel Chicco Belgique | Chicco.be
- Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
- Official Corporate Chicco website
- Tienda para bebés y recién nacidos | Chicco Argentina
- Site Oficial Chicco Brasil
- Chicco México
- Ihre Vetrauensmarke für Baby- & Kinderartikel | Alles für Ihr Baby
- Productos Bebés y Niños | Chicco.es
- Site Officiel Chicco France | Chicco.fr
- Best baby products in India | Infant care products online Chicco India
- Chicco Portugal - Puericultura, Roupa e Brinquedos
- Официальный сайт Chicco Россия
- UK.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>