WYWNA MTX300 Solar Flood Lights Outdoor User Manual
- June 9, 2024
- WYWNA
Table of Contents
WYWNA MTX300 Solar Flood Lights Outdoor
Reading this user manual thoroughly before the user is a must for your safety and the safety of others.
LIMITED WARRANTY
Under normal use conditions, quality assurance is based on the correct preservation, installation, use, and maintenance of products Product damage caused by improper installation and use and violation of product operation regulations is not within the scope of this guarantee; For the quality problems during the quality warranty period, the WYWNA will choose to repairing, repairing parts on repairing new products during the warranty period;lf the warranty period exceeds, materials and labor costs will be properly charged The product quality problems caused by natural factors and environmental factors are not covered by the warranty.
WARRANTY PERIOD
The warranty period is 24 months. In each case, the warranty period is
measured starting on the date of purchase by the original consumer purchaser,
The sales receipt from the first consumerpurchase, or other reasonable
documentary proof, is required in order to establish the start date of the
warranty period.
REMEDY
WYWNA will repair or replace (at WYWNA’s option) any WYWNA product that fails
to operate during the applicable warranty period due to a defect in
workmanship or material. If a valid claim is made during the applicable
period, WYWNA, at its option, will either (1) replace the product, or (2)
exchange the product with a product
that is of equal value. A replacement product assumes the remaining warranty
of the original product or 180 days from the date of replacement, whichever is
greater.
LIMITED TO ORIGINAL CONSUMER BUYER
The warranty on WYWNA’s product is limited to the original consumer purchaser
and to any subsequent owner
EXCLUSIONS
WYWNA’s warranty does not apply to any product that is misused abused,
modified, damaged by accident, or used for anything other than normal consumer
use as authorized in WYWNA’s current product I iteratu re.
HOW TO RECEIVE SERVICE
To obtain warranty service, contact our customer service team at
support@wywna.com.
SPECIFICATIONS
WHAT’S IN THE BOX
INSTRUCTION MANUAL
After installing the remote control battery, press the “ON” button of the remote control to turn on the lamp, and press the “OFF” button to turn off the lamp. You can also press other buttons to enter other working modes of lamps and lanterns. The functions and functions of various working modes corresponding to lamps and lanterns and remote control systems and buttons on the remote control will be described in detail later.
After debugging or inspecting the lamp, it is necessary to press “AUTO” to make the lamp control system return to the normal working mode. If you need to inspect the lamp, first place the solar panel and lamp in a place with sufficient light, and connect the connection between the lamp and the solar panel. Cover the solar panel with opaque material, and the lamp will be light on. The solar panel can work normally and the battery can charge normally electricity.
Warming Notices
- The installation of solar panels should be direct sunlight as more as possible, without being blocked by buildings or trees, and ensure the longest acceptable irradiation time(the solar panels can not be installed under glass or indoors). Only by correctly and scientifically installing solar panels and it will have the best charging effect
- The luminescent surface of the lamp is made of PC plastic, and the surface of the solar photovoltaic panel is made of glass. As the important structure of the lamp, the two are fragile products. Please handle them with care during transportation, handling, storage, and installation, and do not press them heavily to avoid damaging the structure of the lamp.
- Clean the PC cover and solar panel of lamps regularly to keep good light transmittance of lamps. Be careful not to clean the lamps with water or a corrosive solution, but rather with a dry rag.
- This lamp should be stored in a place with good air circulation and less dust. The ambient temperature should be between-10C and, and it should not be stored in an icy environment. Keep away from corrosive substances, stay idle for a long time, and need to charge and discharge once a month.
- This product can not be disassembled without permission. Do not use any charger to charge this product.
ASSEMBLY DRAWING OF PRODUCT
INSTALLATION INSTRUCTION
The lamp can be installed on the wall or on the lamp pole.
The installation method of the lamp is to fix it on the wall or lamp post with expansion screws. The solar panel should allow direct sunlight as much as possible, and the glass of the lamp body should be adjusted to the maximum illumination range, as shown in the figure below. Once installed, connect the lamp power cord and solar panel via the butt joint. Make sure the connector is fully connected to ensure the waterproof effect of the whole lamp. The length of the connecting wire between the solar panel and the lamp body is about 16.4ft.
Be sure to cut off the power supply before installation or maintenance!
REMOTE CONTROL DESCRIPTION
REMOTE CONTROL DISTANCE
AUTO MODE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>