WYWNA WN-BC 800W Solar Street Lights Outdoor Waterproof Street Lights User Manual
- June 9, 2024
- WYWNA
Table of Contents
WYWNA WN-BC 800W Solar Street Lights Outdoor Waterproof Street Lights
SPECIFICATIONS
| Product Version | 300W | 600W | 1000W |
|---|---|---|---|
| Lumin ous Efficiency | 100-130lm/W | 100-130lm/W | 100-130lm/W |
| Light Emitting Diodes (LED) | 270PCS*SM D5730 | 480PCS*SM D5730 | 800PCS*SMD 5730 |
| Battery Capacit y | B000 mAH | 15000mAH | 20000mAH |
| Low Light Support | Lights up for 2-3 days | Light s up for 2-3 days | Lights up |
for 2-3 days
Solar Panel Power| 6V/9W| 6V/18W| 6V/25W
Workin gTemperatur e Range| -10C –+ 40C| -10C — + 40C| -10C –+4 0C
Color Temperature| 6500-?000K| 6500-?000K| 6500-?000K
WHAT’S IN THE BOX
INSTRUCTION MANUAL
Before charging, please press the green button on the light to turn on the
charging mode. The button below turns green once the charging mode is on.
Otherwise the charging fails.
After installing the remote control battery, press the “ON” button of the remote control to turn on the lamp, and press the “OFF” button to turn off the lamp. You can also press other buttons to enter other working modes of lamps and lanterns.The functions and functions of various working modes corresponding to lamps and lanterns and remote control system and buttons on the remote control will be described in detail later.
After debugging or inspecting the lamp,it is necessary to press 11 11 to make the lamp control system return to the normal work-ing mode. If you need to inspect the lamp, first place the solar panel and lamp in a place with sufficient light, and connect the connection between the lamp and the solar panel. Cover the solar panel with opaque material, and the lamp will be light on. The solar panel can work normally and the battery can charge normally electricity.
Warming Notices
- The installation of solar panels should be direct sunlight as more as possible, without being blocked by buildings or trees, and ensure the longest acceptable irradiation time(the solar panels can not be installed under glass or indoors). Only by correctly and scientifically installing solar panels and it will have the best charging effect.
INSTALLATION INSTRUCTION
The lamp can be installed on the wall or on the lamp pole.
The lamp and solar photovoltaic panel can be assembled together through the
lamp arm, and then installed on the wall, and the lamp arm can be fixed on the
wall with expansion screws. As shown in@. The lamp column installation method
is to assemble the lamp and solar panel together through the lamp arm and then
assemble the lamp arm on the lamp column. As shown in CD below this
installation method is an alternative installation method, and the relevant
accessories can be selected according to the needs of customers.
After installation, connect the power line of the lamp and solar panel through the butt joint. Ensure that the joint is fully connected to ensure the waterproof effect of the whole lamp. The lamp end of the conventional power line is 70cm, and the solar photovoltaic panel end is 50cm. It can also be customized according to the needs of customers.
Installation video has been added to the product listing.
REMOTE CONTROL DESCRIPTION
REMOTE CONTROL DISTANCE
AUTO MODE
- Light off automatically charged during the day.
- Light on automatically at dusk until dawn,
MOTION SENSING MODE
- No pedestrian,30% brightness,
- Sensor detected100% brightness.
LIMITED WARRANTY
Under normal use conditions, quality assurance is based on the correct preservation, installation, use, and maintenance of products Product damage caused by improper installation and use and violation of product operation regulations is not within the scope of this guarantee; For the quality problems during the quality warranty period, the WYWNA will choose to repairing, repairing parts on repairing new products during the warranty period;lf the warranty period exceeds, materials and labor costs will be properly charged The product quality problems caused by natural factors and environmental factors are not covered by the warranty.
WARRANTY PERIOD
The warranty period is 24 months. In each case, the warrantyperiod is measured
starting on the date of purchase by the original consumer purchaser, The
sales receipt from the first consumerpurchase, or other reasonable
documentary proof, is required inorder to establish the start date of the
warranty period.
REMEDY
WYWNA will repair or replace (at WYWNA’s option) any WYWNA product that fails
to operate during the applicable warranty period due to a defect in
workmanship or material. If a valid claim is made during the applicable
period, WYWNA, at its option, will either (1) replace the product, or (2)
exchange the product with a product
that is of equal value.A replacement product assumes the remaining warranty of
the original product or 180 days from the date of replacement, whichever is
greater.
LIMITED TO ORIGINAL CONSUMER BUYER
The warranty on WYWNA’s product is limited to the original consumer purchaser
and to any subsequent owner.
EXCLUSIONS
WYWNA’s warranty does not apply to any product that is misused abused,
modified, damaged by accident, or used for anything other than normal consumer
use as authorized in WYWNA’s current product I iteratu re.
HOW TO RECEIVE SERVICE
To obtain warranty service, contact our customer service team at
support@wywna.com
support@wywna.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>