BOBLOV A22, A22P Mini Body Camera User Manual
- June 9, 2024
- BOBLOV
Table of Contents
BOBLOV A22, A22P Mini Body Camera User Manual
PREFACE
We sincerely thank you for using our company’ s product. This manual is the introduction of the A22/A22P mini body camera which includes its functions, features, external structure, operation, and caution items. Before using the product, please read the user manual carefully and keep it properly.
Part 1 Structure Diagram
| Audio RecordButton| Push it up/down to start/end audiorecording in power
off/on state.
---|---|---
| | 2| Play Button/Confirm/ OK Button m| When playback, act as play and
pause.In menu set, shon press itto save changes.
|
3
| Volume +/ Up Button $g| In menu, short press to select upwards; When playing
video, short press to increase the volume, when playback is paused, short
press to the previous file; In the video/photo mode, short press to turn
on/off the IR light.
| 4| Volume -/ Down Button| In menu, shon press to select down-wards; When
playing video, short press to decrease volume, when playback is paused, shon
press tonext file
| 5| USB Interface| Charging port/transfer files when connecting to computer
| 6| Power Button/Video Record| Slide it down and hold it to power on/off.
Slide it up to stan video recording in powering on/off state. Then slide it to
the middle positionto save the video recorded.
| | 7| Reset Hole| Use a pin to reset the camera ifcrashes
| | Menu Button| Long press to enter menu setting; Short press to switch the
video/ photo/playback mode
Return/Offa Screen Button| Shon press to turn off screen display; In menu,
short press to previous menu|
10 TF card slot| Insen a compatible card|
Part 2 Basic Operation
Note: Please format the card on the camera first when first using or changing the card.
- Power on the camera (not on the record video/ audio state);
- Long press the ( m ) button to enter the menu
- setting, and select the “format” option via ICJ andr—) buttons; Short press (=and In) buttons to select “OK”
- and short press the UN ) button to confirm.
**INSERTING CARD
**
Charging
Charge it with the standard cable. It could be cha-rged correctly as you connect it to your charger or a working computer whether your device is on or off. Inserting into power, the camera would be power on automatically, the red indicator shows up and stay. After a full of charge 3 hours, the indicator will turn sturdy green.
Note: It’ s normal if it has a certain hot when charging. The screen of the recorder will display a text prompt when low battery and please charge it in time. If idle the A22 mini camera for a long time, please charge it every 3 months.
Power On/Off
In the power-off state, push the e1010 button down and hold for 3 seconds, the
recorder is turned on then enters the standby mode of real-time moni-toring.
In standby mode, push the power button down and hold it for 3 seconds to turn
off the device.
Take Photo
Press the ( m ) button, turn to the photo preview interface, press10—the
button to take photos. When video recording, the camera couldn’t snapshot at
the same time.
Video Recording
Method 1:
In the power-off state, slide up the video record button in►li to power on the
device and start video recording, the blue indicator flashes. Then push the
button down to a middle positio to save the current file and stop video
recording. The blue indicator goes off and the interface turns to the video
just recorded.
Method 2:
In the standby preview interface, slide the video button up coo to start video
recording, the blue indicator flashes. While recording, push the button down
to a middle position gain to save the curr-ent file and stop video recording.
The blue indi-cator goes off and the interface turns to the video just
recorded.
VIDEO MODE DISPLAY
- Working Blue Indicator
- Video Icon
- Status Indicate(not displayed in standby mode, displays a red dot and flashes in video mode)
- Exposure Compensation
- System Date & Time
- Video Recording Length
- Video Resolution
- Memory Card Status
- Battery Level
Audio Recording
Method 1:
In the power-off state, push up the 011110111 button to power on the device
and start the audio recor-ding, the blue indicator flashes; Push the button
down CIIIIIID to save the current file and stop audio recording. Indicator
goes off and the interface goes to the audio file page.
Method 2:
In the standby preview interface, push the audio button up 0111110 to start
audio recording, the blue indicator flashes; Push the button down CIIIIIID to
save the current file and stop audio recording. Indicator goes off and the
interface goes to the audio file page.
Night Vision (Optional)
A22 Model: In standby/video/photo mode, short press the CI “Volume+”
button to switch to night vision mode manually.Press it again the real-time
image turn colored.
Reset
If the camera crashes or stops working, you could do a reset by poking the
reset hole with a pin or thimble (be careful not to use excessive force). The
device will auto shut down after the reset and can be restarted by slide down
and hold Power
Button unit for seconds to turn it on.
Part 3 Indicator Light
- When charging or connecting to the computer, the red light shows and is steady on, and the green light stays on when fully charged.
- The blue indicator light flashes in the video recording.
- The blue indicator light keeps on for 2 seconds then goes out when taking photos.
- The blue indicator light flashes in the audio recording. The Indicator light could be turned off the menu setting.
Part 4 Abnormal Alarm
This device has two alarm prompts for abnormal conditions, namely:
- A text prompt will appear on the screen of the recorder when low battery.
- A text prompt will appear on the screen of the recorder when full memory / No TF card is inserted.
Part 5 Image Rotation Function
The mini camera lens support 180 degrees of manual rotation. There is an Image Rotation option in the menu setting, Off in default.
Circumstance 1:
The lens is on the side of the back clip, the Image Rotation option in the
menu setting is Off, at this status, the image direction is in a correct way.
Reference for Wearing Way:
Circumstance 2:
The lens is on the side of the screen, at this time, the image is flipped,
enter the menu setting and set the Image Rotation option to On, then a correct
direction image shows up.
**Reference for Wearing Way:
**
If find the preview image or recording image is flipped / upside down:
Method 1:
Please rotate manually the camera lens 180 degrees to check whether the image
direction is corrected. Method 2: Enter the menu setting to turn on the “Image
Rotation” function to “On”
| Parameter Choice| Default Value
---|---|---
VideoResolution| 1080FHD/ 1080P/ 720P| 1080FHD
Photo Resolution| 40M/ 21M/ 12M/ 10M/8M/ 5M/ 3M/ 2MHD/1.3M/ VGA| 21M
Date & Time| Can be edited|
Motion Detection| On, Off| Off
Loop Recording| OP/ 1Min/ 2Min/ 3Min/5Min/10Min| 10Min
Image Rotation| Off/ On| Off
Exposure compensation| +2.0, +5/3, +4/3, +1.0,+2/3, +1/3, +0.0, -1/3,-2/3,
-1.0, -4/3, -5/3, -2.0| +o.o
Format| Format all the files in TF card|
Language| En lish B%6Q| English
---|---|---
Auto power off| Off/ 1 Ming/ 3 Min| OP
LCD Off| Off/ 1Min/2Min/ 3Min/ 5Min/ 10Min| 5Min
Indicator light| Off/ On| Ou
Version| Date|
Default| Restore all settings to a default value.|
SPECIFICATION
Memory Capacity| Support8G8-228GB External Card, please choose high quality
Micro SD Card (Classic 10)
---|---
LCD Screen| 1.3inch TFT LCD Screen
Lens| HD 160 degrees wide-angle lens
Focus Oistance| 50cm-lnfinity
Exposure Method| Automatic
Night Vision| A22 Model: Suppon, ManuallyActivated , 4pcs invisible IR lights;
A22S Model: Doesn’ t Suppon
Max PhotoResolution| 40 million pixel JPG format
Max VideoResolution| 1080FHD (H.264) format
One Key Recording| Suppon one key to audfo/video record
**** Max Video Length| Turn off the Loop Recording, the camera support
recordingcontinuously, max every 10 min video saved as one file.
Motion Detection| Support
Date/Time Stamp| Support
Loop Recording| Support; Off 1Min 2Min 3Min5Min/ 10Min
Part 8 Troubleshooting
-
Q: Can’ t turn on or camera crashes, no response to keystrokes?
A: -
Please charge it for a least half an hour then turn it on.
-
Press the Reset button once, then restart.
Q: Black screen appears after powering on.
A:
- The screen may enter the power-saving mode after pushing the return button mistakenly. Press any button again to light up the screen display;
- Press the Reset button once then restart the camera.
- Check whether the “LCD Off” is turn on in the menu, If you want the display is always on, please enter the menu to set “LCD Off” option to Off. “LCD Off” option can be set to off/1 min/2 min/3min/ 5 min/10min.
- If the issue remains, maybe the display screen is defective, contact after-sale for service.
Q: Incorrect system date and time.
A: Just set your date and time again in menu settings. Long press ( m ) button
to enter the menu setting, press (=and =buttons to find “Date/Time”, press the
(=, button to enter, press =land CI buttons to change then press the button to
confirm.
Q: The computer prompts “Please reconnect the device”./ The camera dish
can’ t be recog-nized by the computer.
A: 1. Use another compatible USB cable to try again. 2. Check whether the
camera USB interface or computer USB port is damaged. 3. If the issue remains,
contact after-sale for service.
Q: The screen displays red color.
A: 1. Please press the ( – > button twice to reset the lens. 2. Maybe the lens
of the device malfunctioned, contact after-sale for service.
Part 9 Customer Service
BOBLOV is dedicated to offer the best service to our valuable customer. To
reach BOBLOV customer service, please e-mail us:
Official Email address: support0boblov.com
Official Website: www.boblov.com
Facebook:
www.facebook.com/BOBLOVGlobal/
Tel: + 1(213) 905-9206
Address: 10700 Jersey Blvd #730 Rancho Cucamonga, CA 91730 USA