SUPERDRIVE SV 450 Racing Wheel Instruction Manual
- June 9, 2024
- SUPERDRIVE
Table of Contents
SUPERDRIVE SV 450 Racing Wheel
Assembly Instructions
left padle
Right Side pedal
Player indicator LED
Port for pedal board
Table
TYPE
|
PS3
|
PS4
| XBOX SERIES XIS
XBOXONE
|
PC(X- INPUTI
|
PC(O- INPUTI
|
SWITCH
---|---|---|---|---|---|---
Action keys
| X| X| A| A| 3| B
0| 0| B| B| 2| A
D| D| X| X| 4| y
11| 11| y| y| 1| X
Rl| Rl| RB| RB| 6| R
L1| Ll| LB| LB| 5| L
R2| R2| RT| RT| 8| ZR
L2| L2| LT| LT| 7| ZL
L3| L3| SL| SL| 11| L
R3| R3| SR| SR| 12| R
D-PAD
| UP| UP| UP| UP| UP| UP
DOWN| DOWN| DOWN| DOWN| DOWN| DOWN
LEFT| LEFT| LEFT| LEFT| LEFT| LEFT
RIGHT| RIGHT| RIGHT| RIGHT| RIGHT| RIGHT
Functions keys| START| OPTIONS| Menu| START| 10| +
SELECT| SHARE| View| BACK| 9|
| | | | | |
Direction| Left stick| Left stick| < -I- >| < -I- >| < -I- >|
Left stick
Left paddle| L2| Ll| LB| LB| 7| L
Right paddle| R2| Rl| RB| RB| 8| R
Left pedal| D| L2| LT| LT| Y-| B
Right pedal| X| R2| RT| RT| Y+| A
Mode| MODE| MODE| X-Guide| X-Guide| 13| HOME
Program| PROG| PROG| PROG| PROG| PROG| PROG
**Before the first use
**
Thank you for purchasing the RACING WHEEL SV 450. Before using the wheel,
please read this instruction manual carefully and keep it for
future reference.
**Features
**
The RACING WHEEL SV 450 is compatible with
- It is compatible with all the racing games on those platforms
- An official controller is required to use the wheel on XBOX SERIES XIS, PS4, XBOX ONE
- Compatible with all PC games ()(-Input and Direct Input)
- 180 degree steering rotation
- Steering sensitivity control (3 positions)
- 6 programmable buttons for tailor made button configuration for use with different racing games
- Fully analog driving control for more realistic driving experience
- Spring-loaded acceleration and brake control pedals
- Connexon to the console through USB port
- The cable connector design for pedals prevents an accidental disconnection of cable
- Super strong and long lasting suction cups for stabilizing
Default buttons configuration
The default buttons configuration is preset according to GRAN TURISMO
buttons configuration.
Installation
Set up the wheel on PS4
- Make sure that the PS4 is turned off.
- Plug the wheel cable in a USB port from the console.
- Plug the cable of the pedals into the steering wheel.
- Plug an official PS4 controller in the USB port located on the wheel, use the provided USB/Micro USB cable. IMPORTANT: the controller must be switched off.
- Turn on the console using the power button on the PS4.
- The red LED of the wheel stays lit Press the HOME button on the wheel to connect it to the console.
- The steering wheel is now ready to use.
Set up the wheel on XBOX SERIES XIS, XBOX ONE.
- Make sure that the XBOX is turned off.
- Plug the wheel cable in a USB port from the console.
- Plug the cable of the pedals into the steering wheel.
- Plug an official XBOX controller in the USB port located on the wheel, use the provided cable. IMPORTANT: the controller must be switched off.
- Turn on the console using the power button on the XBOX.
- The red LED of the wheel stays lit, as the XBOX button on the controller. Press the HOME button on the wheel to connect it to the console.
- The steering wheel is now ready to use.
Set up the wheel on PC
- Turn on the PC.
- Plug the Plug the cable of the pedals into the steering wheel.
- Connect the USB cable of the wheel to any of the USB ports of the PC. A Windows utility starts automatically to install the device. At the end of that operation, the LED n°1 remains on, the wheel is now ready to use.
IMPORTANT
The steering wheel uses the X-lnput protocol by default, so it is compatible
with the latest games. Some older games use the Direct Input protocol. To
switch to Direct Input mode, press and hold the Home/Mode button for 3
seconds, the LED will flash to indicate the change. This mode will then be
used by default. You can switch from one mode to another at any time by
holding down the Home/Mode button for 3 seconds. To set up the wheel in Direct
Input mode, install the driver before connecting the wheel to the PC: www
.superdrive-gaming.com.
Setuper wheel on SWITCH
IMPORTANT
Before plugging the wheel, turn on the console and go to System Settings/
Controllers and Sensors / Pro Controller Wired Communication. Check that On is
selected.
- Make sure that the SWITCH is turned off.
- Plug the wheel cable into a USB port from the console.
- Plug the cable of the pedals into the steering wheel.
- Turn on the console.
- The red LED of the wheel stays lit, the steering wheel is now ready to use.
Set up ~e wheel on PS3
- Make sure that the PS3 is turned off.
- Plug the wheel cable into a USB port from the console.
- Plug the cable of the pedals into the steering wheel.
- Turn on the console.
- Press the HOME button of the wheel to activate the connection.
- The red LED of the wheel stays lit, the steering wheel is now ready to use.
Programming function
You can now play GRAN TURISMO or any other racing games that use the default
button configuration. For other games, you have 2 options to make the right
button
configuration
-
You can either go to the Options/Controllers menu in the game and create your own configuration. The advantage is that you can save it for later gaming sessions.
IMPORTANT
The RACING WHEELSV 450 is identified as a “game controller” in the commands menu of the games. If you wish to modify the button configuration in the game, go to the ‘game controller” section, not to the “steering wheel” section. -
You can also use the programming function “on-the-go” of the RACING WHEEL SV 450. It enables you to create the configuration you want without going in the Options menu of the game, but that configuration will not be saved.
This wheel has a built-in program function: you can assign a new function to some buttons to make your own driving comfort and experience.
6 keys can be programmed:
- Left paddle
- Right paddle
- Left pedal
- Right pedal
- L3
- R3
Programming procedure
- Press simultaneously the OPTIONS and SHARE buttons for 3 seconds. The LED will be lit in green.
- Then press any of the 6 programmable keys (listed above) to set up a new function. The LED will flash green.
- Finally press the button that you would like to reassign to the programmable key(□, X, o, t:,., L1, R1, L2, R2). The LED turns off, the key is now programmed.
- Repeat the above steps to program other buttons if necessary.
Reset one programmed key
- Press simultaneously the OPTIONS and SHARE buttons for 3 seconds. The LED will be lit in green.
- Then press on the programmed key that you would like to reset. The LED will flash green.
- Press again on the same key. The LED turns off, the key is now reset to default.
Reset all the programmed keys
- Press simultaneously the OPTIONS and SHARE buttons for 3 seconds. The LED will be lit in green.
- Press again simultaneously on the OPTIONS and SHARE buttons for 4 seconds. The LED turns off, all keys are now reset to default.
You can also unplug the wheel for resetting the configuration.
Sensitivity adjustment
The sensitivity control is designed for a better steering control adapted to the different types of racing game environments, such as Off-Road, Grand Prix racing, etc. To adjust the sensitivity, press OPTIONS & SHARE simultaneously for 3 seconds, the LED turns lit in green. Then release the keys. Press on SHARE again to reset the current sensitivity. The, press several times on SHARE to select the expected sensitivity. The LED will flash in green to indicate the different options:
- Medium sensitivity: the LED flashes in green regularly. Steering angle is small, good for quick turns racing games
- High sensitivity: the LED flashes in green quickly. Steering angle is very small, good for very quick turns, corner turning, etc.
- low sensitivity: the LED flashes in green slowly. Steering angle is normal, adapted to most of the racing games To validate your choice, press the UP button of the D-PAD (central button of the wheel).
Precautions of uses
- Do not use this product for other purposes than the ones described in this document.
- The wheel should not be used in humid places, splashed or be placed near objects filled with liquids, such as vases. After use, keep the wheel in a dry place.
- Never attempt to disassemble or reconstruct it by yourself.
- Do not apply any excessive pressure to the device and do not apply it to violent shock.
- Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands and/or arms while operating the product. If the condition persists, consult a doctor.
- Take breaks every 30 minutes.
- Place the wheel away from direct sunlight, excessive heat, fire or extreme cold.
- Exposure to extreme temperatures may damage the body, the internal circuitry of the device.
- Do not let unattended children play with the wheel. Do not allow children to play with cords. This product contains small parts that may cause choking if swallowed. This product is not intended to be used by children under 3 years of age.
Contact and Customer Support
Please feel free to contact your Subsonic team for more information about the
RACING WHEEL SV 450 or other products in our range of peripherals.
contact@subsonic.com
Respect the environment
‘Q” In order to protect the environment, please do not discard electric/electronic A devices and appliances with household garbage. Please take them to a recycling collection centre.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>