SUPERDRIVE Gs850-X Racing Steering Wheel with Manual Gear Lever Instructions

: June 9, 2024
: SUPERDRIVE

Table of Contents

Programming the pedals
Programming the paddles and shifter
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Gs850-X Racing Steering Wheel with Manual Gear
Lever Instructions

Programming the pedals

The pedals actually respond to commands in the game. By default for example if you press the accelerator pedal it is like pressing the RB/R2 button and for the brake pedal it is like pressing the LB/L2 button. However, some games use other buttons than the default ones to accelerate and brake. In this case, you have to reprogram the steering wheel buttons.
You then have 2 solutions:

(Preferable solution) In the gamepad control menu assign the acceleration function to the RB/R2 button and the brake function to the LB/L2 button. Save and every time you play the pedals will be set up correctly.
Solution 2: First, identify which button you are accelerating with in the game (using a joystick, for example the X button).
Press the PROG button on the steering wheel, then the right pedal (the LED will flash slower) and then the button you want to assign to the function (e.g. X) so that when you accelerate it will be like pressing the X button. Do the same with the left pedal which you assign to the button that corresponds to the brake in the game. This method is not saved in the wheel and you will have to do it again each time you restart the game. This is why we recommend the first method.

If you have a steering wheel option in the game, disable it and make sure that the controller option is enabled.

Programming the paddles and shifter

The following method is the same for the paddles and the gearshift lever.

The paddles actually respond to the slack control. By default, for example, if you press the right paddle, it is like pressing the R1/RB button and for the left paddle, it is like pressing the L1/LB button. However, some games use other buttons than the default ones for shifting gears. In this case, you need to reprogram the steering wheel buttons.
You then have 2 solutions:

(Preferred solution) In the game’s controller menu, assign the R1/RB button to shift up and the L1/LB button to shift down. Save and every time you play, the pedals will be set up correctly.
Solution 2: First, identify which button you are shifting up with in the game (using a joystick for example the △ button). Press the PROG button on the steering wheel, then press the right paddle (the LED flashes slower) and then press the button you want to assign (△) so that when you press the right paddle it looks like you have pressed the relevant button. Do the same with the left palette and assign it to the correct button. This method is not saved in the wheel and you will have to do it again each time you restart the game. This is why we recommend the first method.

If you have a steering wheel option in the game, disable it and make sure that the controller option is enabled.
All our manuals are available by clicking on the following link: <https ://superdrive-gaming.com/en/f-a-q-guide-en/>