PREMIUM LEVELLA PFS1605 16 Inch Stand Fan User Manual
- June 9, 2024
- PREMIUM LEVELLA
Table of Contents
PREMIUM LEVELLA PFS1605 16-inch Stand Fan
Product Information
The product is a 16 Stand Fan that can be used for cooling purposes. The fan comes with several parts including a front grille, blade cap, blade, nut, rear grill, front cover, motor, rear cover, oscillation knob, neck cord, rear control panel, front control panel, switch, connector, inside tube, outer tube, base cover, screw, round base, heavy base, and power cord. The fan has three-speed settings and can be turned on and off by using the speed control switch.
Product Usage Instructions
-
Before connecting the fan to the mains, read the operating instructions carefully to avoid incorrect use and damage.
-
Assemble the fan completely before use.
-
Do not operate the fan without the grilles (fan guards) in place.
-
Watch out for long hair as it can get caught in the fan due to the air moving.
-
Do not point the air flow directly toward people for a long time.
-
Ensure that the fan is disconnected from the supply mains before removing the guard.
-
To turn on the fan, turn the speed control switch to (1-2-3).
To turn it off, turn it to 0. -
Keep the fan in a cool and dry place.
-
To clean the fan, unplug it and use a soft cloth soaked with soapy water to clean the dust and stains. Do not use solvents like thinner gasoline, etc.
-
After cleaning and drying the fan, pack it into a plastic bag and store it in a dry place.
Thank you for your purchasing this fan. Please read all instructions carefully and keep for future use.
INSTRUCTIONS
Please read these Operating Instructions carefully before connecting your
device to the mains in order to avoid damage due to incorrect use. Please pay
particular attention to the safety information. If you pass the device on a
third party, these Operating Instructions must also be handed over.
WARNING- When using electrical appliances, basic safety precautions
should always be followed to reduce the risk of fire, electrical shock and
personal injury.
SAFETY INFORMATION
- Incorrect operation and improper handling can lead to faults on the device and injuries to the user.
- In the event of improper use or incorrect handling, no liability can be accepted for any damage that may occur.
- Before you put the plug into the socket, please check that the type of current and mains voltage corresponds to the instructions on the nameplate on the underside of the appliance.
- Do not immerse the unit or mains plug in water or any other liquid. There is risk to life due to electric shock. However, if this should occur, remove the mains plug immediately and then have the unit checked by an expert before using it again.
- Do not operate the device if the mains cable or the mains plug shows signs of damage, if the device has been dropped on the floor or has been otherwise damaged. In such cases take the device to a specialist for checking and repair if necessary.
- Never remove the mains plug from the socket by pulling on the mains cable, or with wet hands.
- Ensure that the mains cable does not hang over sharp edges and do not allow it to become trapped.
- Keep the appliance away from damp areas and protect it from splashes.
- Keep the appliance away from hot objects (e.g. hotplates) and open flames.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or without experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- The machine should not be operated by means of an external timer switch or by means of a separate system with remote control.
- Use the appliance on a flat, dry and heat resistant surface.
- This appliance is intended to be used in households and similar applications such as: staff kitchen areas in shops, offices and other working environments; farmhouses; by clients in hotels, motels and other residential-type environments; bed and breakfast type environments.
- Never leave the device in unattended during use.
- Do not store or operate the appliance in the open air.
- Keep the appliance in a dry place, inaccessible to children (in its original packaging).
- Never put fingers or any other objects through the grilles (fan guards) when the fan is running.
- Never operate the product without the grilles (fan guards) in place, as serious personal injury may result.
- The appliance must be assembled completely before use.
- Watch out for long hair! It can be caught in the fan due to the air moving.
- Do not point the air flow directly towards people for a long time.
- Ensure that the fan is disconnected from the supply mains before removing the guard.
Fan Parts
- Front Grille
- Blade Cap
- Blade
- Nut
- Rear Grill
- Front Cover
- Motor
- Rear Cover
- Oscillation Knob
- Neck Cord
- Rear Control Panel
- Front Control Panel
- Switch
- Connector
- Inside Tube
- Outer Tube
- Base Cover
- Screw
- Round Base
- Heavy Base
- Power
How to use
To turn on the fan, simply turn the speed control switch to (1-2-3). To turn it off, turn to”0″.
Maintenance
- Keep this unit in a cool and dry place
- To keep the fan clean, unplug it and use a piece soft cloth soaked with soapy water to clean the dust and stains and wipe dry. Do NOT use solvents like thinner gasoline, etc.
- After the fan is clean and dry you may pack it into a plastic bag to store it in a dry place.