FUFU GAGA LJY-WFKF210049-01 3-Tiered Shoe Storage Installation Guide
- June 9, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA LJY-WFKF210049-01 3-Tiered Shoe Storage
Product Information
Shoe Storage
Version: 11/30/2022
The Shoe Storage is a furniture product designed for storing shoes in an organized manner. The product comes with various accessories such as screws, dowels, and slide rails that are required for assembly. It is important to read the entire manual before starting to assemble and/or use this product. The manual should be followed thoroughly and kept for further reference. The furniture should be assembled on a soft layer such as a rug to avoid scratches. Finding a partner to install with you can speed up the installation efficiency and shorten the time.
Anti-Topple Warning: Overturned furniture can cause serious or fatal
crush injuries. To prevent tipping over, be sure to use the wall attachment,
if not included with this product.
Please purchase the wall attachment that fits your wall. If unsure,seek
professional advice. Please read and follow each step of the instructions
carefully.
Product Usage Instructions
-
Before starting the assembly process, ensure that you have all the necessary tools listed in the manual.
-
Insert quickfit screw(A) into corresponding holes in plate 2,3 and 9 with a screwdriver as shown in figure 1.
-
Knock part(L-2,L-3) into plate 2 and 9 slightly as shown in figure 1.
-
Fix slide rail(V) to plate 2 and 9 using screw(E) as shown in figure 2.
-
Flip plate 9, insert quickfit screw(A) into corresponding holes as shown in figure 2.
-
Attach plate 12 to plate 9 with wooden dowel(C) at first; attach plate 13 to plate 9, turn cam lock(B) in plate 12,13 clockwise to tighten as shown in figure 3.
-
Connect plate 1 with plate 4 using wooden dowel(C) at first, then fix using screw(K). Insert quickfit screw(A) into corresponding holes in plate 1 as shown in figure 3.
-
Connect plate 1 with plate 9 using wooden dowel(C) at first, turn cam lock(B) in plate 9 clockwise to tighten as shown in figure 4.
-
Connect plate 8 with plate 9 using wooden dowel(C) at first, then fix using screw(K) as shown in figure 4.
-
Slide plate 17 along the grooves in plate 1 and 13 at first.
Insert wooden dowel(C) into corresponding holes in plate 1,12,8 and 10. Attach plate 3 to plate 4,1,12,13,8 and 10, turn cam lock(B) clockwise to tighten as shown in figure 5. -
Attach plate 11 and 22 to plate 9 with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown in figure 6.
-
Slide plate 16 and 23 along the grooves as shown in figure 6.
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this
product.follow the manual thoroughly and keep it for further reference.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT!
It is important that any product which is assembled using any kind of screw is
re-tightened 2 weeks after assembly,and once every 3 months – in order to
assure stability through-out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use
a rag dipped in neutral detergent to fully wipe it, and then dry it with a
clean rag.For glass materials, wipe with a rag dampened with water glass
cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when
installing, because the board is easy to break.
TOOLS
Please prepare the following tools
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
PARTS
ASSEMBLY
STEP 1
Insert quickfit screw(A) into corresponding holes in plate 2,3 and 9 with a
screwdriver as shown.
Knock part(L-2,L-3) into plate 2 and 9 slightly as shown.
STEP 2
- Fix slide rail(V) to plate 2 and 9 using screw(E) as shown.
- Please pay attention to the holes where the accessories are inserted.
- Flip plate 9, insert quickfit screw(A) into corresponding holes as shown.
STEP 3
Attach plate 12 to plate 9 with wooden dowel(C) at first; attach plate 13 to
plate 9, turn cam lock(B) in plate 12,13 clockwise to tighten as shown.
Connect plate 1 with plate 4 using wooden dowel(C) at first, then fix using
screw(K). Insert quickfit screw(A) into corresponding holes in plate 1 as
shown.
STEP 4
- Connect plate 1 with plate 9 using wooden dowel(C) at first, turn cam lock(B) in plate 9 clockwise to tighten as shown.
- Connect plate 8 with plate 9 using wooden dowel(C) at first, then fix using screw(K) as shown.
STEP 5
Slide plate 17 along the grooves in plate 1 and 13 at first.
Insert wooden dowel(C) into corresponding holes in plate 1,12,8 and 10.
Attach plate 3 to plate 4,1,12,13,8 and 10, turn cam lock(B) clockwise to
tighten as shown.
STEP 6
Attach plate 11 and 22 to plate 9 with wooden dowel(C), turn cam lock(B)
clockwise to tighten as shown.
Slide plate 16 and 23 along the grooves as shown.
STEP 7
Insert wooden dowel(C) into corresponding holes in plate 1,11,22,8 and 10 at
first.
Attach plate 2 to plate 4,1,11,22,8 and 10, turn cam lock(B) clockwise to
tighten as shown.
STEP 8
Reinforce back plate using part(S) with screw(T) as shown.
STEP 9
Fix part(R) to plate 1 using screw(O) as shown.
STEP 10
After aiming at the position, drill a hole on the wall and knock part(P) into
as shown.
STEP 11
Fix the unit to wall using screw(Q) as shown.
STEP 12
Insert quickfit screw(A) into corresponding holes in plate 6 as shown.
Attach plate 19 and 20 to plate 6, turn cam lock(B) clockwise to tighten as
shown.
Slide plate 18 along the grooves.
Cover plate 21, and fix with plate 19,20 and 21 using screw(H) as shown.
STEP 13
Align and clip the assembled slide rail into the slots of the drawer side
plate and fix with screw(G) as shown.
Fix knob(U) to drawer face plate using screw(F) as shown.
STEP 14
Fix plastic hinge(M,N) to plate 7 using screw(J) as shown.
Fix handle(D) to plate 5 and 7 respectively using screw(F) as shown.
Fix hinge(I) to plate 5 using screw(J) as shown.
STEP 15
Attach plate 15 to the assembled plastic hinges and fix with screw(W) as
shown.
Attach plate 14 to the assembled plastic hinges and fix with screw(W) as
shown.
STEP 16
Fix the drawers to side plates by fixing plastic hinges through part(L-1) with
screw(J) as shown.
STEP 17
Fix plate 14 to the plastic hinges with screw(W) as shown.
STEP 18
Attach door plate 5 to plate 3 by fixing hinge with screw(J) as shown.
STEP 19
If there is misalignment after you install, adjust the screw to the best condition
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>