Neomounts NM-TC100 CPU Holder Specifications and Datasheet
- June 9, 2024
- Neomounts
Table of Contents
Neomounts NM-TC100 CPU Holder
SPECIFICATIONS
GENERAL
- Min. weight 0 kg (per screen)
- Max. weight 5 kg (per screen)
- VESA pattern
- 100×100 mm
- 50×50 mm
- 75×75 mm
- VESA minimum 50×50 mm
- VESA maximum 100×100 mm
FUNCTIONALITY
- Type Fixed
- Height adjustment 13,8 cm
- Width adjustment 1,7 – 7 cm
INFORMATION
- Color Black
- Warranty 5 year
- EAN code 8717371445737
Please note: The inch sizes stated are just an indication, combined with the weight and VESA sizes. The maximum weight and VESA size are absolute restrictions for the products and should not be exceeded
Description
Neomounts by Newstar Select Thin Client Holder (attach between monitor and mount) – Black
The Neomounts Select thin client mount, model NM-TC100BLACK, allows you to mount a thin client computer to a monitor mount. A thin client mount creates a need for and clean desk because it’s stored behind the monitor and doesn’t use any valuable desk space. Increase the lifetime of your computer due to a reduction in intake of dust and dirt. Keep the workplace clean without computers on the desk. This Neomounts Select thin client mount allows vertical installation of a thin client computer between the screen and monitor mount. This product includes VESA 50/75/100 hole pattern to simplify installation with flat screens and flat screen mounts. Hide your cables and keep the workplace nice and tidy. Easy to adjust in width and depth to fit most thin client PCs. The specifications listed show the maximum and minimum width and depth of the mount. All installation material is included with the product.
Overview
NM-TC100BLACK NEOMOUNTS BY NEWSTAR SELECT NUC/THIN
Caution
- To ensure safety, please read this manual carefully before installation and follow the instructions. store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity, or contact with water,
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
User Support
- Address: Neomounts Computer Products Europa B.V. I Wateringweg 62 I 2031 EJ Haarlem I The Netherlands I
- Contact no. +3 1(0)23-5478888
- Support: info@neomounts.com
- Email: www.neomounts.com
FAQ’s
Where does one install the NM-TC100?
The NM-TC100 comes with all the required hardware and is simple to install. With the brackets and screws included, you may install them on the underside of your desk.
The NM-TC100 can be modified, right?
Yes, the NM-TC100 may be moved in both directions to accommodate various CPU sizes.
Can I use my CPU with the NM-TC100?
The NM-TC100 has a width of 90-220mm and a height of 290-500mm, making it suitable for the majority of CPUs. However, it’s advisable to confirm your CPU’s measurements before making a purchase.
Are standing desks compatible with the NM-TC100?
The NM-TC100 is appropriate for standing desks, yes.
Neomounts NM-TC100 CPU Holder: What is it?
The CPU of your computer may be safely mounted under your desk with the Neomounts NM-TC100 CPU holder, keeping it off the ground and out of the way.
What are the NM-TC100’s measurements?
The NM-TC100 is made to fit CPUs that are 90 to 220 mm wide and 290 to 500 mm tall.
What amount of weight can the NM-TC100 bear?
CPUs up to 20 kg can be supported by the NM-TC100.
Can any desk be mounted with the NM-TC100?
The majority of desks with a thickness of 15 to 50 mm are compatible with the NM-TC100.
Can the NM-TC100 be used for equipment other than CPUs?
The NM-TC100 was created specifically to hold CPUs and might not work with other devices.
Is a warranty offered for the NM-TC100?
Yes, a 5-year warranty is provided with the NM-TC100.
Download this PDF Link:Neomounts NM-TC100 CPU Holder Specifications and Datasheet