Neomounts FPMA-D550DDVBLACK Monitor Desk Stand Instruction Manual
- June 9, 2024
- Neomounts
Table of Contents
Neomounts FPMA-D550DDVBLACK Monitor Desk Stand
Product Information
The FPMA-D550DDVBLACK is a monitor desk stand designed to hold two monitors with VESA mounting patterns of 75x75mm or 100x100mm. The stand can support a weight of up to 6kg per monitor and has an adjustable height feature. The product comes with all the necessary parts and tools for assembly.
Product Usage Instructions
- Assemble the stand by attaching the arm to the rod and mounting the upper side of the rod.
- Attach the arm to the rod again and adjust the height to your preference before tightening it.
- Attach the VESA plate to the back of each monitor using the provided screws.
- Attach the monitors to the arms and secure them in place using the provided screws.
- Adjust the torque of each screw to ensure that the monitors are securely attached.
- Route the cables through the cable management system provided and insert the Allen keys into the slot on the stand for future use.
Note that the product also comes with language-specific instructions in multiple languages, including English, Dutch,German, French, Italian, Spanish, Portuguese, and Polish.
DIMENSION
FPMA-D550DDVBLACK
PARTS
ASSEMBLY
STEP 1
Place the decorative cover
STEP 2
Mount the rod to the base
STEP 3
Attach the arm to the rod, adjust the height and tighten
STEP 4
Mount the upper side of the rod
STEP 5
Attach the arm to the rod, adjust the height and tighten
STEP 6
Attach the VESA plate to the monitor
OPTION
Use spacers if necessary
STEP 7
Attach the screens and secure them
STEP 8
Adjust the torque
STEP 9
Route the cables and insert the Allen keys into the slot for future use
STEP 10
Adjust the mount to the desired position
CAUTION
- To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall, ceiling or floor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all saews (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shell only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.