JENSEN CAR110X Media Receiver with Android Auto and Carplay with 10.1Inch Display User Guide
- June 9, 2024
- Jensen
Table of Contents
- JENSEN CAR110X Media Receiver with Android Auto and Carplay with 10.1Inch
- Wiring Diagram – Inputs/Outputs
- Installation
- General Operation
- Wired & Wireless Car Play Operation
- Wired & Wireless Android Auto™ Operation
- Bluetooth Operation
- One-Year (or Two-Year*) Limited Warranty
- FCC Compliance
- Read More About This Manual & Download PDF:
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JENSEN CAR110X Media Receiver with Android Auto and Carplay with 10.1Inch
Wiring Diagram – Inputs/Outputs
Note: Works for Car Play and Android Auto only.
Note:
When replacing a fuse, make sure to use the correct type and amperage. Using
an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style
fuse located on the power connector.
Wiring Notes:
Subwoofer outputs The Subwoofer preamp audio outputs (Blue jacket with Black
RCA) is active in all audio modes.
Rear camera input
A rear view camera (not included) can be used with the Camera input.
Sirius XM
For more information on how to install the Sirius XM Connect Vehicle tuner,
consult the installation guide included with the tuner(Sirius XM connect tuner
and subscription sold sparely).
Installation
Before You Start
- Disconnect negative battery terminal. Consult a qualified technician for instructions.
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight,
Installation
Control Locations
The radio display features the following functions and displays:
- Voice Activation Button
- SOURCE/HOME
- Power/Volume/Mute
- Previous Button
- Next Button
- RESET / USB Port
Main Menu
In main menu, press the desired icon to enter the corresponding mode:
Radio/USB/SXM/BT Phone/Android Auto/CarPlay/AV In/BT
Audio/Camera/Equalizer/Settings.
Tuner Operation
Audio Operation
Press the Settings icon on the main menu screen to adjust Fader and Balance
controls, Equalizer (8-Band Tone Control and 8 Presets EQ Settings).
USB Operation
From the main menu, touch the USB icon on the main screen.
Note: Video playback is enabled only when the vehicle is in park and the parking brake engaged.
General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from nine categories represented by the icons on the top of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen.
Sync GPS Time: Synchronizes the clock time with the GPS. Manual: Turn off GPS synchronizes and you can set the time manually. Time Zone: Select the time zone.
Wired & Wireless Car Play Operation
Wired connection
- Connect an Apple Car Play compatible device to this unit via USB.
- Press the Apple Car Play icon. The Apple Car Play home screen appears.
Wireless connection
Before using Apple Car Play wirelessly, turn on the Bluetooth/WIFI function on
the Phone.
- Press icon on the main menu;
- Press ” ” to confirm to use wireless Car Play;
- Press ” ”icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the iPhone, press “Pair” and then press “Allow” for the popups;
- Press ” ” on the screen to confirm to connect;
- Press “Use Car Play” on the iPhone. The unit configures the connection then starts the application.
Tip: Press ” ” icon. Displays Car Play device list. This icon appears Only When Car Play is connected and two or more devices can be used as Car Play Source.
Wired & Wireless Android Auto™ Operation
Wired connection
- Connect an Android Auto™ compatible device to this unit via USB.
- Press the Android Auto icon.
The Android Auto home screen appears.
Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi function on
the Android device.
- Press icon on the main menu;
- Press ” ” to confirm to use wireless Android Auto;
- Press ” ”icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the Android device, press “Pair” and then press “Allow” for the popups;
- Press ” ” on the screen to confirm to connect;
The unit configures the connection then starts the application.
Tip: Press ” ” icon. Displays Android Auto device list. This icon
appears Only When Android Auto is connected and two or more devices can be
used as Android Auto Source.
Bluetooth Operation
Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream
audio. it must be authenticated. This is also referred to as “pairing” a
device.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are
currently connected. Complete the pairing sequence from your Bluetooth device.
Refer to the owner’s manual for your device for more details. The device name
is “CAR110W”. The unit can be in any mode of operation when pairing is per-
formed. On certain phones, pairing may need to be done more than once.
-
Connect
The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device. -
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is con-nected. -
Dialing a Number
Press to display keypad and dial a number. -
Making and Ending a Call
Press to connect a call, and press to end a call. -
Transferring Audio
Press – to transfer audio between the head unit and mobile phone.
Streaming Audio
- Press to play or pause the music.
- Press to skip to the previous track.
- Press to advance to the next track.
One-Year (or Two-Year*) Limited Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Nambung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year (or two years*) from the date of the original purchase. Nambung America Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com.
Warranty Coverage
- Limited 1-year warranty when purchased from an authorized Jensen dealer. or Limited 2-year warranty when purchased from and professionally installed by an authorized Jensen dealer. (Proof of purchase and Installation required)
What to do?
-
Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
-
If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
-
Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
-
For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
-
Call us toll-free at 888-921-4088
(Monday-Friday, 9:00 a. m ,to 5:00 p. m, EST) -
E-mail usatcs@jensenmobile.com
-
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>