impact SLS-AC Serise Air Cushioned Link Stand Instructions
- June 9, 2024
- Impact
Table of Contents
impact SLS-AC Serise Air Cushioned Link Stand
Introduction
Thank you for choosing Impact.
The air-cushioned link stands are industry-standard general-purpose light
stands that interlock, which makes them perfect for storage and travel because
they take up minimal space. When the stands are stacked together, you can
easily carry several of them with one hand. These stands feature beefy locks
with T-handles for exceptional torque, so even at maximum height, they provide
a secure mount for your lights.
Each stand features a corrosion-resistant brass baby pin that’s compatible
with most studio lights and flash heads. And for extra functionality, the baby
pin has a 3/8-inch male thread to add a ball head has a 3/8-inch male thread
to add an accessory such as a ball head. A 3/8-16 to 1/4-20 adapter is
included to mount an accessory like a ring light or microphone. Air cushioning
ensures protection for your mounted equipment and fingers when the locks are
loosened. The sections will slowly ease down without slamming.
Precautions
- Please read and follow these instructions, and keep this manual in a safe place.
- Handle the unit with care.
- Clean the unit with a soft, dry cloth.
- Make sure everything is secure before proceeding.
- Make sure the item is intact and there are no missing parts
- Do not exceed the maximum load capacity.
- Use caution when mounting a product at the maximum load capacity.
- All images are for illustrative purposes only
Setting Up the Stand
-
If the stands are interlocked, separate them by pressing the release button and removing the stand in the direction indicated by the recessed arrow.
-
Loosen the center lock, and spread the tripod legs.
For the widest footprint and maximum stability, make sure the spreader is parallel to the floor.
Interlocking the Stands
-
Close the stands so the legs fold flat, and tighten the center lock.
-
Make sure the release button arrows are all pointing in the same direction, and place the bottom tab into the triangular notch.
-
Press the tops of the stands together. Insert the triangular tab into the slot so they click and lock together.
Specifications
| SLS-AC-7 | SLS-AC-79 | SLS-AC-9 | SLS-AC-12 | |
|---|---|---|---|---|
| Number of Sections | 4 | 3 | 3 | 4 |
| Maximum Working Height | 83.9 in. (2.13 m) | 94.9 in. (2.41 m) | 108.1 in. (2.75 | |
| m) | 144 in. |
(3.66 m)
Minimum Working Height| 29.9 in. (76 cm)| 40.6 in. (103 cm)| 47.5 in. (120.5
cm)| 49.3 in. (125 cm)
Load Capacity| 8.8 lb. (4 kg)| 8.8 lb. (4 kg| 22 lb.
(10 kg)
| 22 lb.
(10 kg)
Closed Length| 27.4 in. (69.5 cm)| 34.9 in. (88.5 cm)| 40.6 in. (103 cm)| 42 in.
(106.5 cm)
Footprint Diameter| 27.6 in. (70 cm)| 44.5 in. (113 cm)| 43.3 in. (110 cm)|
43.3 in. (110 cm)
Material| Aluminum, Polymer, Brass| Aluminum, Polymer, Brass| Aluminum, Brass|
Aluminum, Brass
Weight| 2.68 lb. (1.22 kg)| 3 lb.
(1.35 kg)
| 4.9 lb. (2.2 kg)| 5.6 lb. (2.55 kg)
Mounting
Stand/Column Top Mount| 5/8 in. receiver with 3/8-16 male thread
Included Adapter| 3/8-16 female to 1/4-20 male
One-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2023 Gradus Group LLC. All Rights Reserved.