Imou IPC-B46LN-White Security Camera Wireless Outdoor User Guide

IPC-B46LN-White Security Camera Wireless Outdoor
User Guide

Download the Imou Life App

‘Option 1
Search “Imoulife App from the App Store or Google Play.
Option 2
Scan the QR code on the below picture to install Imou Life App.
Note

• For iOS, the system version should be 9.0 or above.
• For Android, the system version should be 5.0 or above.

Create an Imou account

2.1 Click”sign
2.2. Select the region where you are from.
2.3 Enter your email address and set a password.
2.4  Enter the verification code found in the email sent from Imou.
Note
Kindly be noted that the email verification code might be blocked. If you didn’t receive it, please check your trash box.

Add the camera into your lmou account

Option 1
Scan the QR code located on the back of the camera.
Option 2
Add the camera manually by inputting the serial number.
Note

• Please place your smartphone camera within 30 cm of the router.
• Please keep your smartphone 10-15 cm from the camera when scanning the QR code.
  

Remove the cover and insert the battery

4.1 Twist to remove the cover from the bottom of the camera.
4.2 Ensure that the arrow on the battery faces up. Insert the battery into the right place, and you will hear a click sound.

Power on the camera

5.1 Press the reset button for 2-3 seconds and ensure that the LED turns green.
5.2 Wait until the LED flashes green and then tap next.
5.3 Align the cover to the entrance.
5.4 Push and then twist it into the lock position.  

Connect to the device DAP hotspot

6.1 Connect your mobile phone to the device DAP hotspot.
6.2 Once connected, select your home Wi-Fi network on the next page. What if you fail to connect to DAP hotspot?
Go to the WLAN setting of your mobile phone, and then connect to the device DAP hotspot manually. The password is a 8-bit safety code located on the back of the camera. Once connected, return to this page.
Note
Kindly be noted DAP hotspot does not have Internet connection. It is just a necessary step for device configuration.

Connect to Imou cloud server

Enter your home Wi-Fi password correctly and tap next, then the camera will connect to lmou cloud server automatically.

Failure Solution About Add Device

8.1 Please open the WiFi list page of your phone and check if a DAP – XXX hotspot is connected (as shown in the red box in the left figure).
8.2 Please check and ensure that your router can connect to the EXTERNAL network.
8.3 Please try to reset the device by pressing the button on the device, and wait for the green light to flash slowly, then adding the device again (as shown in the right figure).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>