SCOTT 2023 Scale Bike Owner’s Manual
- June 9, 2024
- SCOTT
Table of Contents
SCOTT 2023 Scale Bike
LEGEND
GEOMETRY & TECHNICAL DATA
| SEATPOST | mm | 31.6 (use carbon grease) |
|---|---|---|
| SEATPOST CLAMP | mm | 34.9 |
| TRAVEL | mm | 100 Front |
| MAX ROTOR | mm | 180 Rr/Ft (160 Rr Small) |
| MAX CHAINRING | Tooth | 38 |
| MAX TYRE WIDTH | in | 2.5 |
| CHAINLINE | mm | 55 |
| Alloy/Carbon | ||
| --- | --- | --- |
| MY23 SCALE | SM | |
| A | Head tube angle | ° |
| B | Head tube length | mm |
| C | Top tube horizontal | mm |
| D | standover height | mm |
| E | BB offset | mm |
| F | BB height | mm |
| G | Wheelbase | mm |
1215.9
I| BB center to TST| mm| 390/390| 440/440| 480/480| 530/530| 580
J| Seat angle| °| 75/75.4| 75/75.4| 75/75.3| 75/75.3| 75
K| Chainstay| mm| 425/425| 425/425| 425/425| 425/425| 425
L| Reach| mm| 420.3/418.5| 442.8/442.3| 463.3/463.6| 492.9/491.2| 512.9
M| Stack| mm| 596.1/600.3| 605.3/604.9| 614.6/618.9| 623.8/628.1| 623.8
| Fork Rake| mm| 44| 44| 44| 44| 44
| Trail| mm| 112.6/105.1| 112.6/105| 112.6/105| 112.6/105| 112.6
SCALE
- The rear brake calliper is a post mounted 160mm without an adapter. The maximum rotor size is 180mm, except on a small size frame where it must not exceed 160mm.
- If you wish to use two piston brake callipers, you must check the clearance, as not all two piston brakes will fit.
- Please note that on a small size frame it is only possible to use a 500 ml water bottle, with a side entry cage.
- Carbon frames will have a unique insert for the rear axle.
HEADSET ADJUSTMENT
It is important to install the headset correctly depending on the set up
required. There are two types of headset cups. 0° & 0.6° ( 64° & 65°) These
can be identified from the stamp on the inner surface of the headset cup
The headset is available in two options:
- 288251 SYN HEADSET ZS56/28.6-ZS56/40 MTB
- 290060 SCO HEADSET CUP KIT SPARK 22
Do not use a standard headset tool to remove these plastic headset
cups.
RIDELOC
| SCALE RC | FORK | PART NO. | DROPPER |
|---|---|---|---|
| SCALE RC SL | 3P/0-7-14MM | 296245 | NO |
| SCALE RC WORLD CUP EVO | 3P/0-7-14MM | 296245 | NO |
| SCALE WORLD CUP | 3P/0-7-14MM | 296245 | NO |
| SCALE RC TEAM ISSUE | 2P/0-10MM | 296245 | NO |
| SCALE RC TEAM | 2P/0-10MM | 296245 | NO |
| SCALE | FORK | PART NO. | DROPPER |
| SCALE 910 | 3P/0-7-14MM | 296245 | NO |
| SCALE 920 | 3P/0-7-14MM | 296245 | NO |
| SCALE 925 | 3P/0-7-14MM | 296245 | NO |
| SCALE 930 | 3P/0-7-14MM | 296245 | NO |
| SCALE 940 | 2P/0-17MM | 296246 | NO |
| SCALE 950 | 3P/0-7-14MM | 296245 | NO |
| SCALE 960 | 3P/0-7-14MM | 296245 | NO |
| SCALE 965 | 2P/0-17MM | 230099 | NO |
| CONTESSA SCALE | FORK | PART NO. | DROPPER |
| CONTESSA SCALE 910 | 3P/0-7-14MM | 296245 | NO |
| CONTESSA SCALE 920 | 2P/0-17MM | 296246 | NO |
| CONTESSA SCALE 930 | 2P/0-17MM | 230099 | NO |
There are two Rideloc levers for the Scale, this will depend on which fork has
been fitted.
296245 SCO RIDELOC DOWNCLAMP 0-7-14/0-10MM 23
296246 SCO RIDELOC DOWNCLAMP 2P/0-17MM 23
CABLE ROUTING
Foam tubing: 277026 SCO CABLE ANTI-RATTLE LINER 90CM 20
SPARE PARTS
- 297086 SCO STEM ACCESSORY COVER COMBO 22
- 420004 SCO SCALE CARBON 23 CHAINSTAY PROTECTOR / 420003 SCO SCALE ALLOY 23 CHAINSTAY PROTECTOR
- 297132 SCO CHAINGUIDE SCALE CARBON 23
- 297728 SCO HEADSET KIT SCALE ALLOY 23
- 290059 SCO STEM SPACER/TOP CAP SY MTB XC 22 / 290057 SCO STEM SPACER/TOP CAP SY MTB COMBO 22 / 290057 SCO STEM SPACER/TOP CAP SY MTB DC 22
MANUFACTURER’S GUARANTEE,
When purchasing a new SCOTT bicycle from an authorized SCOTT dealer, SCOTT grants a manufacturer’s guarantee subject to the following provisions.
CONDITIONS
The manufacturer’s guarantee is only granted to the first-time buyer of a
SCOTT bicycle who has purchased it from an authorized SCOTT dealer. The
manufacturer’s guarantee only applies if the bicycle is registered to the
first buyer at www.scott-sports.com within ten days of purchase.
DURATION
The manufacturer’s guarantee is granted from the date of purchase for a period
of five years on bicycle frames and rear ends. The guarantee period is reduced
to three years, if the SCOTT bicycle is not serviced at least once a year by
an authorized SCOTT dealer. Maintenance services must be carried out in
accordance with the maintenance instructions in the SCOTT manual and must be
confirmed there by the stamp and signature of the authorized SCOTT dealer. For
frames and rear ends of Category 5 bicycle models and for rigid forks
manufactured by SCOTT, the duration of the manufacturer’s guarantee is limited
to two years. If a defect on the SCOTT bicycle is remedied within the scope of
a manufacturer’s guarantee or a warranty claim, the duration of the
manufacturer’s guarantee is not extended. The manufacturer’s guarantee ends,
when the first-time buyer transfers ownership of the SCOTT bicycle to a third
person.
ASSERTION
The manufacturer’s guarantee is provided by SCOTT Sports SA, Route du Crochet
11, 1762 Givisiez, Switzerland. The buyer must inspect the SCOTT bicycle
immediately after purchase and notify his authorized SCOTT dealer at once in
writing of any obvious defects. Hidden defects must be reported immediately
after their discovery. In the event of a guarantee claim, the SCOTT bicycle
must be handed over to an authorized SCOTT dealer. The latter will contact
SCOTT to remedy the defect. The assertion of a guarantee claim always requires
the presentation of the original proof of purchase as well as the proof of
maintenance service in the SCOTT manual.
Performance of SCOTT in the event of a guarantee claim
In the event of a guarantee claim, SCOTT will, at its own discretion, repair
the defect or replace the defective product with a product of similar quality,
whereby colour and model deviations are possible. If a repair or replacement
is not possible, a purchase price refund will be made taking into account
previous use. SCOTT is entitled to commission third parties to remedy the
defect.
LIMITATIONS
The manufacturer’s guarantee applies exclusively to frames, swingarms and
rigid forks of SCOTT bicycles. Bicycle components are excluded from this
manufacturer’s guarantee.
The manufacturer’s guarantee does not apply to normal wear and tear, damage
caused by accidents or other excessive force on the SCOTT bicycle, corrosion,
improper maintenance, incorrect assembly and assembly of unsuitable components
or accessories as well as cosmetic defects, for example in the varnish.
The manufacturer’s guarantee does not apply to SCOTT bicycles that have been
used in a rental shop.
MISCELLANEOUS
These manufacturer’s guarantee provisions apply to all SCOTT bicycles as of
model year 2023.
Statutory warranty rights of the buyer and guarantees of component
manufacturers (Shimano, SRAM etc.) remain unaffected by this manufacturer’s
guarantee.
The place of jurisdiction for all disputes in connection with this
manufacturer’s guarantee is Freiburg, Switzerland. This manufacturer’s
guarantee is subject to Swiss law to the exclusion of all legislation that
refers to foreign law.
© SCOTT Sports SA 2022. All rights reserved.
The information contained in this manual is in various languages but only the
English version will be relevant in case of conflict.
P.E.D Zone C1, Rue Du Kiell 60 | 6790 Aubange | BelgiumDistribution: SSG
(Europe) Distribution Center SA SCOTT Sports SA | 11 Route du Crochet | 1762
Givisiez | 2022 SCOTT Sports SA www.scott-sports.com
Email: webmaster.marketing@scott-sports.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>