EDUP LOVE USB Bluetooth 5.0 Adapter with External Antenna Installation Guide

EDUP LOVE USB Bluetooth 5.0 Adapter with External Antenna

Two ways for driver installation: via CD or online driver
The official link of driver: http://www.szedup.com/support/driver-download/

How to find the model number?

There is a product barcode on the back of prodcut box where you can find the model number. (e.g. Model:EP-B3536,the number is 3536 )

How to find the driver online ?

Input the model number in search box and search.

How to use

Step 1. Please insert the CD or USB flash disk and open the file step by step as picture below.

Step 2. Without installing the drive, you can’t use the Bluetooth adapter
(Note: if there is no CD slot in your computer, please download the driver from www.szedup.com)

Installation Guide

Part 1. Take Windows 10 as an Example

1. Connect Bluetooth adapter to computer, insert our disk which contains a driver file and double click “Setup.axe” to start
2. Select”Agree and Install the Bluetooth Drivef’ to start installation After the progress bar indicates it is done,lt is done, Please restart the computer.

Part 2,Palr with Your Device via Bluetooth

1. Select the Bluetooth icon on bottom right of our system’s tool bar,then right click to pullout a man bar. Click”Add a Bluetooth Device”
2. Look through and select the Bluetooth device you want to pair with, Dual click the “Device”,system will automatically start pairing, that means pairing process is done, Fell free to personalize settings at Control Interface.

Part 3, Pair with a Cell Phone

1. Click”Add a Bluetooth Device”
2. Look through and select the cell phone you want to pair wilh,system will start to pair by clicking”Next”.At the same time, a code will pump up on both the system and cell phone.this is certificate whether they are the right pairs or not.Click”Start to Pair”on your phone and “Next”on computer to activate pairing process.
3. When it pump out a dialogue says”Your device is ready to go”,that means pairing process is done,Click”Done”,Fell free to personalize setting at Control Interface.

Part 4, Date Transfer

1. Right click the file which you want to transfer and select “Send to Bluetooth Device”.
2. Select a receiving device.support selecting multi files simultaneously.here we take”vivo X9s Plus” as an example,click”Next’.
3. On your phone.end click”Accept” to start data transfer.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>