Valco NORDELLMK3 IPX7 Waterproof Wireless Speaker User Manual

NORDELLMK3
IPX7 Waterproof Wireless Speaker
User Manual

Package Includes

• Bluetooth Speaker
• Audio Cable
• Thank-you Card
• Charging Cable
• Manual

Illustration

1. Power ON/OFF E
2. Mode Selection of Bluetooth/ Micro SD card/LINE IN
3. 3D Surround Effect ON/OFF
4. Play/Pause/Answer or Reject Phone Call
5. Volume down/Previous track
6. Volume up/Next track
7. Charging Port
8. Micro SD Card Slot
9. AUX Audio Input Port

Parameters

Function buttons

2. After power ON the speaker, quickly double press to enter TWS (True Wireless Stereo) function. When in the TWS pair mode, double press again to break TWS connection.
Long Press| 1.Long press for 2 seconds to turn on.
2.Long press again for 2 seconds to turn off.
| Short Press| Short press to switch mode: Bluetooth, Micro SD, AUX
 | Long Press| 1. Long press for 2 seconds to disconnect Bluetooth with notification tone.
2. Long press and hold for 5 seconds, you can clear away pairing records with notification tone. And it will turn off automatically.
---|---|---
| Short Press| Press it to turn ON/OFF 3D surround effect.
| Short Press| 1. When music is playing: Play or pause.
2. When a call is coming : Short press to answer.
3. When a call is answering: Short press to hang off.
4. When Bluetooth is paired: quickly double press to redial the last call in your phone.
Long Press| 1. Press and hold for 2 seconds to reject the incoming call
2. When the speaker crashes or works abnormally, long press for 6 seconds for automatic reset and turn off.
| Short Press| Volume down, 16 levels in total.
Long Press| Previous track
| Short Press| Volume up, 16 levels in total.
Long Press| Next track

LED Indicator Instruction

1. Blue indicator: Blue LED blinks when the speaker waiting for connection. Turns solid blue after Bluetooth connected successful. Solid blue when Micro SD card and AUX mode. Breath light when play and solid blue when pause.
2. Red indicator: Solid red when the speaker is recharging, and turns off after the battery fully recharged.
3. White indicator: Turns on when the 3D surround mode is on. Turns off when the 3D surround mode is off. (When turning on the speaker, default is 3D mode off.)

Bluetooth Pairing

1. When speaker is power on, the blue LED will blink. Go to Bluetooth setting on your device, find “MS-02″and select to pair.

Micro SD Card/AUX Mode

1. Max support reading 64GB Micro SD card.
2. Insert any Micro SD card and the speaker will playing the audio files automatically. (Support to identify videos of WAV/FLAC/APE/MP3 format.)
3. Connect any audio device with 3.5mm port via the audio cable and the speaker will shift to AUX mode.
4. If your phone has connected the speaker, press “Mato change Micro SD card play.

TWS Bluetooth Pairing

1. Turn on two speakers. (Please make sure these two speakers to be paired disconnect from your Bluetooth device before you turn them on.)
2. Then take one of the speakers and quickly double-click the POWER button, then you will hear beep; That means you enter the TWS pairing mode.
3. When successfully paired with notification tone, the LED indication light on one speaker will stay blue (right channel), and the other speaker will flash blue (left channel).
4. Turn on the Bluetooth on your device. When your device finds “MS-02”, select it and connect.
5. The LED indication light on both two speakers will stay blue when your device is connected. They will perform as the wireless stereo surround system.
6. Once the speakers are well paired at the first time, they will be automatically paired next time without the above TWS pairing operation.
7. If the speaker used to be paired, it is suggested to press “MODE” button for 5 seconds to restore factory setting and restart. Then follow the above instruction 1- 5 to have the same speaker re-paired with the required new speaker.
8. If speakers are paired, only the left channel speaker will answer the phone and the right one will have no sound.
9. If speakers are paired, 3D key is out of work.

FQA

Q: Can’t turn on the speaker?****

– A: Make sure if there is power left, and please use the provided charging cable to charge the device. Please charge the product fully bimonthly if you don’t use it for a long time.

Q: Can’t pair Bluetooth?****

– A: 1. Make sure the Bluetooth function of your device and the speaker has been opened.
2. Make sure the connect distance is in the Bluetooth valid range.
3. Make sure you have followed the pairing steps according to the manual.
4. Long press “M” key to restore factory setting and re-pair.

Notice:

1. Please read carefully the manual and check accessories of this product.
2. Don’t disassemble or strongly extrude this product to avoid any damage.
3. Don’t place the product in a high temperature environment including fire or heater surroundings.
4. Don’t put this product into a humid place or liquid. Please keep the speaker in a dry place and be away from moist or corrosive environment. And please charge the product fully bimonthly

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>