nordlux VEJERS Outdoor Hanging Wall Light Instructions
- June 9, 2024
- nordlux
Table of Contents
VEJERS Outdoor Hanging Wall Light
Instructions
VEJERS Outdoor Hanging Wall Light
IP5X: Dust is prevented from entering the lamp in amounts that can cause
damage to the function/safety of the lamp.
IPX4: Raindrops falling from any angle will not affect the
function/safety of the lamp.
Class I: The lamp has an earth terminal and must be connected to the
yellow/green earth wire.
Do not exceed the maximum wattage.
Parallel arranging possible.
The lamp is only suitable for connecting directly to the mains.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting
installation work. In some countries electrical installation work may only be
carried out by a authorized electrical contractor. Contact your local
electricity authority for advice.
** Disposal of waste equipment by users in private households in the
European Union. This symbol indicates that this product must not be disposed
of with your other household waste. Electrical and electronic equipment
contain substances which may cause damage to human health and environment if
not recycled correctly. It is your responsibility to hand over to a designated
collection point for recycling of waste electrical and electronic equipment.
When handing over for correct recycling you help to prevent these products
straining nature and environment unnecessarily and to protect human health.
For more information regarding correct disposal, please contact your local
city office, your household waste disposal service or the store where you
purchased this product.
Taillike med Dares Nye udendørslampe!
Guarantee
The Nordau Outdoor lamps in copper and galvanized are guaranteed for up to 15
years. This guarantee applies to extensive corrosion in the form of holes in
the metal caused by rust. The guarantee is subject to presentation of receipt.
There is not guarantee on the components which have been damaged by wear and
tear or mistreatment of the lamps
We congratulate you on your new outdoor lamp
Stainless steel
Remember to take care of your lamp. Just follow the guidelines below.
The shiny, uniform and decorative surface of stainless steel makes it very
suitable for outdoor use. It is an alloy consisting of iron, chrome and
nickel. During bath pickling, a thin, rustproof oxide layer forms on the
surface. The surface is continually vulnerable to atmospheric conditions, and
from other effects of the close environment. This means that the lamp must be
regularly maintained if its surface is to remain shiny and untarnished by
rust. Before setting it up, treat your lamp with acid-free oil, and dry it off
with a soft cloth. Repeat this three or four times a year. Stainless steel
lamps are not recommended for use in aggressive environments such as coastal,
agricultural or industrial areas.
Copper lamps
Our copper lamps are made of solid copper. The mechanical prepara-tion leaves
minor scratches in the surface which quickly disappears in connection with the
patina process. After a few showers the copper will get stained but the
aerated air and moisture will soon make the lamp appear with a dark brown
surface. The characteristic patina-green colour will first appear after
several years, dependent on the environment, weather etc.
Hot-galvanized lamps
The zinc treatment of the steel lamps is executed manually in plants. The
temperature of the melted zinc is about 460 degrees. When the lamps are dipped
in melted zinc a reaction between the metalls occurs, which develops alloys in
the surface. The lamp and the components of the lamp are manually dipped in
the hot zinc. This treatment leaves variations in the coating in the form of
partly an uneven surface and partly minor formations of drops. Thin »zinc
curtains« might also occur on the surface and they show as a thin film which
hangs down from the edge of the lamp. This film can easily be removed or
brushed off with a soft brush.
Condensation**
Condensation is a natural phenomenon arising under specific atmospheric
conditions. Damp heat and cold air meet, which causes condensation of water on
the surface. When water heats up it leads to rising water vapour, which will
be able to affect electric components. Condensation is not included by Nordau
warranty, unless it is possible to prove that a technical /production error in
the lighting causes entry of water. In case of condensation please check:
- If the lighting is mounted according to instructions. Washers should seal tightly. Make sure to tension screws and lenses.
- In garden lightings rising damp from the ground may cause condense-tion in the metal post. This problem can be defeated by filling sealing material into the metal post.
- It is highly important that drainage holes are kept free of impurities if any.
BEFORE ASSEMBLING THE BOLLARD AGAIN DO REMEMBER TO WIPE OFF ALL PARTS!
In Denmark, outdoor lightings must be mounted by an authorized electrician.
Mounting instruction
Taillike med Dares Nye udendørslampe!
www.nordlux.com
Nordau NS
Oster Havnegade 34 . 9000 Aalborg
Documents / Resources
|
nordlux VEJERS Outdoor Hanging Wall
Light
[pdf] Instructions
70205353047_36, 70205353047, VEJERS Outdoor Hanging Wall Light, VEJERS,
Outdoor Hanging Wall Light, Hanging Wall Light, Wall Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>