Kanlux STIVI LED 36W-NW-O Ceiling Mounted LED Light Instruction Manual

Kanlux STIVI LED 36W-NW-O Ceiling Mounted LED Light

Product Information

• Product Name: STIVI LED
• Model Numbers: P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21, P22, P23, P24, P25
• Size: A3-297x420mm/ISO216
• Voltage: 220-240V~
• Frequency: 50Hz
• Power Consumption: 24W (P1-P5), 36W (P6-P10)
• Luminous Flux: 3120lm (P1-P5), 4680lm (P6-P10)
• Color Temperature: 4000K
• Color Rendering Index (CRI): 80
• Ingress Protection Rating: IP65
• Impact Protection Rating: IK08
• Life Span: 50,000 hours
• LED Light Source: Ellipse Tc 6x MacAdam (P1-P5), Not specified (P6-P10)

Product Usage Instructions

The STIVI LED product is designed to be used in households and other similar general applications. It can be used both indoors and outdoors. The product is intended to be mounted using Option A or Option B as shown in the diagram below:

• Before mounting the product, ensure that the power supply is disconnected. Connect the L and N wires to the corresponding terminals as shown in the diagram above.
• To turn on the product, connect the power supply and switch it on. The STIVI LED product has a life span of 50,000 hours and a color temperature of 4000K. It has an ingress protection rating of IP65 and an impact protection rating of IK08.
• Please refer to the user manual for additional information and recommendations on usage and maintenance of the product.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with
disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first
use. The product can be connected to a supply network which meets energy quality standards as prescribed by law. To maintain the proper IP protection level, the right diameter
of the power cable should be selected for the cable gland used in the product.

FUNCTIONAL CHARACTERISTICS

Product can be used either indoors or outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical
detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. Product with non-replaceable light source of the LED type. Product
cannot be fixed if the light source becomes damaged. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. It’s forbidden to use the product with damaged protective cover. Product must not be used in unfavourable conditions, e.g. dust, water, moisture, vibrations,
explosive air atmosphere, fumes, or chemical fumes, etc. Replacing the light source in the housing is impossible. If the light source is damaged replace the entire housing. It is
not possible to disassemble the light source and control panel without permanently damaging the product and losing the declared tightness degree of the equipped product
(lighting fixture).

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.
• P2: Rated power.
• P3: Rated luminous flux.
• P4: The specified luminous flux refers to the light source (LED module) used.
• P5: Colour temperature.
• P6: Rated durability.
• P7: Colour Rendering Index.
• P8: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P9: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
• P10: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P11: Viewing angle.
• P12: Protection against mechanical impact with energy = 5J.
• P13: Dust-proof product. Protection against water jets provided.
• P14: Product can be used either indoors or outdoors.
• P15: The product is not compatible with lighting dimmers.
• P16: The product can only be used in a lighting fixture with protective glass. The chipped globe, screen or protective shield must be replaced immediately.
• P17: Product meets the requirements of EU directives.
• P18: Environmental operating temperature range that the product can be exposed to.
• P19: Caution, risk of electric shock.
• P20: This product is equipped with a light source with energy efficiency class C.
• P21: The product is compliant with all relevant United Kingdom regulations.
• P22: It is not possible to replace the LED light source.
• P23: It is not possible to replace the control panel or control equipment.
• P24: The product meets the requirements of technical regulations applicable in Ukraine.

OVERVIEW

INSTALLATION

INSTRUCTION

Through-wiring of the fixtures possible

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. P25: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same
way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising.
Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The
above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area
is recommended.

COMMENTS/GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about
Kanlux products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com. CE declaration of compliance: We, Kanlux SA, hereby declare the product is compliant with the basic requirements and other respective provisions of Directive 2014/53/EU. The declaration of compliance is available in electronic form on the company’s website: www.kanlux.com.
www.kanlux.com
Kanlux SA, ul. Objazdowa 1-3, 41-922 Radzionków (CZ)
Distributor: Kanlux s.r.o., Sadová 618, 738 01 Frýdek-Místek (SK)
Distributor: Kanlux s.r.o., Zlatovská 2179/28, 911 05 Trencín (HU)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>