LEDVANCE L18 HF 8W-830-840 2G11 LED Lamp Dulux User Manual
- June 9, 2024
- LEDVANCE
Table of Contents
LEDVANCE L18 HF 8W-830-840 2G11 LED Lamp Dulux
Product Information
- The DULUX LED is a range of LED lamps designed for use in dry conditions or in a luminaire that provides protection. The lamps are suitable for high frequency operation and are not recommended for emergency operation. The lamps are not dimmable and should not be used with CCG.
- The lamps are available in four different wattage options: 18W, 24W, 36W, and 55W. The ambient temperature range for the lamps is not specified, but the storage temperature should be kept within the limits specified by the manufacturer. The compatibility list is based on testing conducted by the manufacturer.
Product Usage Instructions
- To determine if the lamp is operated with an electronic or magnetic ballast, examine it with a smartphone camera. If the light does not flicker, it is an electronic ballast (HF).
- When using the DULUX LED lamps, ensure that they are used in dry conditions or in a luminaire that provides protection. The lamps are suitable for high frequency operation and should not be used for emergency operation. The lamps are not dimmable and should not be used with CCG.
- When selecting a lamp, choose the appropriate wattage option based on your needs. Ensure that the storage temperature is kept within the limits specified by the manufacturer.
DULUX® LED L is suitable for 4pin 2G11 base: Electronic Ballast (ECG) or AC mains. Please check our latest ECG compatibility list at www.ledvance.com /ecg-compatibility file name: Ballast compatibility DULUX LED Gen6 2023. Not for use with CCG*
DIMENSION
Camera Test: To find out whether lamps are operated with an electronic or magnetic ballast, examine with a smart phone camera. If the light does not flicker it is an Electronic Ballast (HF).**
PRODUCT SPECIFICATION
| Replacement of conventional compact fluorescent lamp on ECG¹ )|
Ambient temperature 2) (Ta)| Storage temperature 3)
(Ts)
---|---|---|---
DULUX LED L18 HF 8W 830/840 2G11| 18 W|
-20 °C … 45 °C
|
-20 °C … 80 °C
DULUX LED L24 HF 12W 830/840 2G11| 24 W
DULUX LED L36 HF 18W 830/840 2G11| 36 W
DULUX LED L55 HF 25W 830/840 2G11| 55 W
DULUX® LED L is suitable for 4pin 2G11 base: Electronic Ballast (ECG) or AC mains. Please check our latest ECG compatibility list at www.ledvance.com/ecg-compatibility file name: Ballast compatibility DULUX LED Gen6 2023. Not for use with CCG. Camera Test: To find out whether lamps are operated with an electronic or magnetic ballast, examine with a smart phone camera. If the light does not flicker it is an Electronic Ballast (HF). CCG driven luminaire remove CCG and operate lamp on AC mains 220-240V.
****ECG driven luminaire DULUX® LED L check compatibility list.
INSTALLATION INSTRUCTION
The compatibility list is based upon testing conducted by the manufacturer in a lab simulated environment, and the results can vary in certain field applications due to a number of factors. LEDVANCE does not take over any responsibility, warranty or liability that this results can also achieved by using the devices under other conditions, or when using successor models of the tested devices, or different models of the same manufacturer. In case of nonobservance of the instructions, safety risks like overheating of DULUX® LED L or ECG may occur in rare cases. Luminous flux will change in dependency of used ballast. This lamp is designed for general lighting service (excluding for example explosive atmospheres). This lamp may not be suitable for use in all applications where a traditional compact fluorescent lamp has been used. The temperature range of this lamp is more restricted. Tc point is located below the LED module on the back side of the lamp. In case of multi-lamp luminaire application measure tc Max temperature of all installed lamps. Please use a flexible thermosensor (e.g. “Type K”) and fix it on the tc point. LED lamps operated above tc max can lead to premature aging and failure of the devices. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted.
- Replacement of conventional compact fluorescent lamp on ECG.
- Ambient temperature.
- Storage temperature.
- Lamp to be used in dry conditions or in a luminaire that provides protection.
- Lamp suitable for high frequency operation.
- Lamp not suitable for emergency operation.
- Dimming not allowed.
- Not for use with CCG.
ABOUT COMPANY
- LEDVANCE GmbH
- Steinerne Furt 62
- 86167 Augsburg, Germany
- www.ledvance.com
- LEDVANCE Ltd, Aquila House,
- Delta Crescent, Westbrook, Warrington,
- WA5 7NR, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>