LEDVANCE DULUX LED T/E LED Lamp Osram Instructions
- June 9, 2024
- LEDVANCE
Table of Contents
LEDVANCE DULUX LED T/E LED Lamp Osram
Product Information
The DULUX LED T/E series includes the following models: T/E13 1x, T/E18, T/E32, T/E26, and T/E42. These models are replacements for conventional bulbs with wattage ranging from 13W to 42W. The bulbs come in different GX24q bases and HF V ratings of 830/840. They can be used with electronic ballasts (ECG) and AC mains, but not with conventional control gears (CCG).
The compatibility of the bulbs with different ballasts is listed in the Ballast Compatibility DULUX LED Gen6 2023 document, which can be found at www.ledvance.com/ecg-compatibility.
The bulbs have different ambient temperature ranges for usage and storage, which should be followed for optimal performance.
Product Usage Instructions
- Choose the appropriate DULUX LED T/E bulb model based on the wattage of the conventional bulb being replaced.
- Check the base type and HF V rating of the bulb to ensure compatibility with the existing ballast.
- If using an ECG, refer to the Ballast Compatibility DULUX LED Gen6 2023 document to ensure compatibility with the bulb.
- Follow the recommended ambient temperature ranges for usage and storage of the bulb.
- Install the bulb in the appropriate socket, ensuring that it is securely in place.
- Turn on the power to the socket and check that the bulb is functioning properly.
DULUX® LED T/E
DULUX® LED T/E is suitable for 4pin GX24q-1, GX24q-2, GX24q-3, and GX24q-4
base: Electronic Ballast (ECG) and AC Mains. Please check our latest ECG
compatibility list at www.ledvance.com/ecg-
compatibility —>
file name:
Ballast compatibility DULUX LED Gen6 2023. Not for use with CCG*
The
compatibility list is based upon testing conducted by the manufacturer in a
lab-simulated environment, and the results can vary in certain field
applications due to a number of factors. LEDVANCE does not take over any
responsibility, warranty, or liability that this results can also be achieved
by using the devices under other conditions, or when using successor models of
the tested devices, or different models of the same manufacturer.
In case of nonobservance of the instructions, safety risks like overheating of DULUX® LED T/E or ECG may occur in rare cases. Luminous flux will change in dependency on used ballast. This lamp is designed for general lighting service (excluding for example explosive atmospheres).
This lamp may not be suitable for use in all applications where a traditional compact fluorescent lamp has been used. The temperature range of this lamp is more restricted. Tc point and tc max temperature is located on the lamp. In case of multi-lamp luminaire application measure tc Max temperature of all installed lamps. Please use a flexible thermosensor (e.g. “Type K”) and fix it on the tc point. LED lamps operated above tc max can lead to premature aging and failure of the devices.
In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted.
- Replacement of a conventional compact fluorescent lamp
- Ambient temperature.
- Storage temperature.
- Lamp to be used in dry conditions or in a luminaire that provides protection.
- Lamp suitable for high-frequency operation.
- Lamp is not suitable for emergency operations.
- Dimming is not allowed.
LEDVANCE GmbH
Steinerne Furt 62
86167 Augsburg, Germany
www.ledvance.com
LEDVANCE Ltd, Aquila House, Delta Crescent, Westbrook, Warrington, WA5 7NR,
United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>