TurboTronic ZL-LED01 LED Electric Kettle Instruction Manual
- June 9, 2024
- TurboTronic
Table of Contents
TurboTronic ZL-LED01 LED Electric Kettle
PRODUCT INFORMATION
The TurboTronic LED Electric Kettle is a household appliance that boils water for various purposes. It comes with a water level indicator and a stand for safe usage. The kettle switches off automatically after boiling and has a control lamp on the water indicator.
General Safety Instructions
- Do not use the kettle if it is damaged or has a faulty power cord.
- Do not immerse the kettle or the base in water.
- Do not use the kettle for anything other than boiling water.
- Keep the kettle away from children.
Special Safety Instructions for the Kettle
- Do not open the lid when pouring.
- If the kettle is overfilled, boiling water may be ejected.
- The kettle is only to be used with the stand provided.
First Use of the Kettle
- Fill the kettle with water. Do not overfill. Use the water level indicator.
- Place the kettle on the base.
- Connect the kettle to an AC 220-240V 50/60Hz power supply.
- Switch the kettle to position `1′. The control lamp on the water indicator shows that the water is boiling.
- After boiling, the kettle switches off automatically. Disconnect the kettle from the mains electricity supply.
Cleaning
Always remove the plug from the mains supply before cleaning the kettle. The
exterior of the kettle should be cleaned, if necessary, with a slightly damp
cloth without additives. The filter can be removed for cleaning.
NOTE: This appliance is intended to be used in household and similar
applications such as staff kitchen areas in shops, offices and other working
environments, farmhouses, by clients in hotels, motels and other residential
type environments, and bed and breakfast type environments.
General Safety Instructions
- Before commissioning this kettle, please read the instruction manual carefully.
- Please keep the instruction manual, guarantee certificate, the sales receipt and if possible, the carton with the inner packaging.
- This kettle is intended exclusively for private and not for commercial use.
- Switch off the kettle and remove the plug from the socket when the kettle is not in use. When you disconnect the power cord of the kettle, grasp and pull the plug, not the cord/cable.
- Switch off the kettle before cleaning the kettle.
- Keep the kettle out of the reach of children. Do not leave children unsupervised with the kettle.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Test the kettle and the cord/cable regularly for damage. Check that the kettle is operating properly. If there is damage of any kind or if the kettle is not operating properly, stop using the kettle and unplug it immediately.
- Do not attempt to repair the kettle yourself, only authorised and qualified personnel may repair this kettle.
- Keep the kettle and cord/cable away from heat, direct sunlight,water, moisture,sharp edges and so on.
- Use only original accessories, do not connect incompatible products.
- Do not use the kettle outdoors.
- The base and exterior of the kettle are not water-resistant, keep it dry at all times.
- Under no circumstances must the kettle be placed in water or any liquid or come in contact with liquid. Do not handle the kettle with wet or moist hands. If the kettle become wet or moist, remove the main plug from the socket immediately.
- DO NOT touch the contents of the kettle.
- Use the kettle only for its intended purpose.
- The kettle is only to be used with the stand provided.
- If the supply cord is damaged, please replace by the service center or the person who designated by the manufacturer or a qualified person to avoid electric shock.
Special Safety Instructions for the Kettle
- Use only cold water when filling the device.
- The water level must be between the MAX. and MIN. marks.
- Switch the kettle off before removing it from the base.
- Always ensure that the lid is tightly closed.
- The base and exterior of the kettle must not become wet.
- Kettle body used must match with the kettle base.
First Use of the Kettle
Before using the kettle for the first time, fill the kettle with cold water
and boil it twice without any additives.
- Fill the kettle with water. Do not overfill. Use the water level indicator.
- Place the kettle on the base.
- Electrical connection
- Check whether the electrical voltage which you intend to use is the same as that of the kettle’s. Details can be found on the label on the base of the kettle.
- Only connect the kettle to a properly installed 220-240V 50/60Hz socket.
- Switch the kettle to position ‘1’. The control lamp on the water indicator shows that the water is boiling.
- After boiling, the kettle switches off automatically.
- Disconnect the kettle from the mains electricity supply.
- Do not open the lid when pouring.
- If the kettle is overfilled,boiling water may be ejected.
- The kettle is only to be used with the stand provided.
- This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
Cleaning
- Always remove the plug from the mains supply before cleaning the kettle.
- The exterior of the kettle should be cleaned, if necessary, with a slightly damp cloth without additives.
- The filter can be removed for cleaning
Power Supply:
AC 220-240V 50/60Hz 1850-2200W
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>