SOUNDPEATS Air3 Half In Ear True Delicate Wireless Earbuds User Manual

SOUNDPEATS Air3 Half In Ear True Delicate Wireless Earbuds

Pairing

1. Open the charging case lid while the case is with enough power left, press and hold the button on the charging case for 3 seconds until the white light flashes, both earbuds will turn on and enter pairing mode.
2. Activate the Bluetooth on your device and choose “SOUNDPEATS Air3” to connect.
   

Reset

1. Place back both earbuds, the white light on the charging case flashes twice, the earbuds start charging.
2. With the case lid open, press and hold the charging case button for 10 seconds until the white light flashes 2 times, reset complete.
3. Close the case lid and reopen to activate the earbuds.

Wearing

Product Diagram

Touch Control

Power On| Auto: Open up the case lid
Manually: Press and hold the MFB for 1.5s
---|---
Power Off| Auto: Place back into charging case and close the lid
Manually: Press and hold the MFB for 10s
Play / Pause| Auto: Take off either earbud to pause music
Wear either earbud or both together to play music Manually: Double tap the MFB
Volume –| Single tap the left MFB
Volume +| Single tap the right MFB
Previous Track| Press and hold the left MFB for 1.5s
Next Track| Press and hold the right MFB for 1.5s
Answer / Hang Up Phone Call| Double tap the MFB
Reject Phone Call| Press and hold the MFB for 1.5s
Switch Between Two Calls| Press and hold the MFB for 2s
Manually Enter Pairing Mode| Press and hold the charging case button for 3s
Activate Voice Assistant| Triple tap the right MFB
Enter / Exit Game Mode| Triple tap the left MFB

Game Mode

SOUNDPEATS Air3 adopts the latest technology to ensure low latency in game mode and make sure the sound sync with the image.
Triple tap on the lett to activate the game mode with a voice prompt “Game Mode” and deactivate the mode with a prompt “Exit Game Mode”.

Q&A

Q1: What does the indicator on the charging case tell?

It shows the battery power leff in the charging case.

While charging the case, the indicator flashes slowly

Q2: How to charge the charging case?

1. Use a Type-C adapter to charge the case (current no more than 1A). The indicator flashes while charging.
2. Please charge the earbuds and charging case at least once per 3 months when not in use for a long time.

Q3: Why are the earbuds still connected to my phone after placing them back and closing the case lid?

1. The charging case has no remaining power. The case can’t turn off the earbuds if the case battery is dead.
2. Please make sure the earbuds are correctly placed in the charging case, and the contactors on both the charging case and earbuds are clean. Please try to clean them with something like microfiber cloth.

Q4: Why is the playtime not same as described?

A single charge will not support continuous use for 17.5 hours. The earbuds work
5 hours for a single charge and the charging case provides extra 2.5 recharges.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC ID

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>