8BitDo SN30 Pro Plus Bluetooth Gamepad Instruction Manual

8BitDo SN30 Pro Plus Bluetooth Gamepad

SN30 Pro+ Bluetooth gamepad – instruction manual

• Press start to tum on the controller.
• Hold start for 3 seconds to tum off the controller.

Switch

• motion controls, NFC scanning, IR camera, HD rumble, notification LED are not supported, nor can the system be waken up wirelessly.
• the status LED indicates the number of players, 1st LED on for the first player, the 1st and 2nd LEDs on forthe second player, up to 8 players maximum.

1. Bluetooth connection
   • press and hold Y + start to turn on the controller. LED starts to rotate from left to right.
   • hold the pair button for 3 seconds to enter its pairing mode. LED stops blinking for a short moment then starts to rotate again (this is required for the very first time only).
   • go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
   • LED becomes solid when the connection is successful.
2. Wired connection

• please ensure the [Pro Controller Wired Communication] is enabled.
  • press and hold Y + start to turn on the controller. LED starts to rotate from left to right.
  • connect the controller to the use port of your Switch dock, wait till the controller is successfully recognized by your Switch to play.

Windows

• required system: Windows 10 (1903) or above.

1. Bluetooth connection
   • press and hold X + start to turn on the controller, the 1st and 2nd LEDs start to blink.
   • hold pair button for 3 seconds to enter its pairing mode. LEO starts to rotate from left to right (this is required for the very first time only).
   • go to your Windows device’s Bluetooth setting and turn it on, pair with (8BltDo SN30 Pro +), LED becomes solid when the connection is successful.
2. Wired connection
   • press and hold X + start to turn on the controller, the 1st and 2nd LEDs start to blink.
   • connect the controller to the USB port of your Windows device, wait till the controller is successfully recognized by your Windows device to play.

Android

• required system: Android 9.0 or above.

1. Bluetooth connection
   • press and hold B + start to turn on the controller, the 1st LED starts to blink.
   • hold pair button for 3 seconds to enter its pairing mode. LED starts to rotate from left to right (this is required for the very first time only).
   • go to your Android device’s Bluetooth setting, pair with [88it0o SN30 Pro+], LED becomes solid when connection is successful.
2. Wired connection
   • OTG support is required on your Android device, please contact your manufacturer for more information.
   • press and hold B + start to turn on the controller, the 1st LED starts to blink.
   • connect the controller to the use port of your Android device, wait till the controller is successfully recognized by your Android device to play.

Apple

• Required system: iOS 16.3, iPadOS0 16.3, tv0S”16.3, mac0S0 13.2 or above. Apple•, iPedos•, macos•, and tvO are trademarks of Apple Inc., registered in the U.S. and other countries.

1.  **Bluetooth connection**
  * press and hold B + start to turn on the controller, the 1st LED start to blink.
  * hold the pair button for 3 seconds to enter its pairing mode. The LED starts to rotate from left to right (this is required for the very first time only).
  * go to your Appia device’s Bluetooth setting and turn it on, pair with l8BltDo SN30 Pro+ J. LED becomes solid when the connection is successful.
2.  **Wired connection**
  * use wired connection is only available for macOS or iPadOS devices with use-c ports.
  *  Press and hold B + start to turn on the controller, the 1st LED start to blink.
  * connect the controller to the use port of your Apple device, wait till the controller is successfully recognized by your Apple device to play.

Turbo function

• home LEO blinks continuously when the button with turbo functionality is pressed.
• the star button is a screenshot button when connected to Nintendo Switch.
• 0-pad, joysticks, home, select and start buttons are not included. Hold the button you would like to set the turbo functionality to, then press at.arto activate /deactivate its turbo functionality.

Battery
1000mAh built-in battery pack with 20 hours of playtime. Rechargeable with 4-hour charging time. Replaceable with AA batteries with 20 hours of play time.

Status: LED indicator

• low battery mode red: LED blinks

• battery charging red: LED stays solid

• battery fully charged: red LEO turns off

• • the controller will tum off in 1 minute with no connection or 15 minutes of inactivity when connected with Bluetooth.
  • controller stays on with a wired connection.

Ultimate Software

• it gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control and create macros with any button combination.
• create controller profiles and switch between them at any time.
• please visit support.8bitdo.com for the application.

Support
please visit support.8bitdo.com for further information & additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>