Seenda 2AFW2-B009 2.4G Wireless Keyboard User Manual
- June 10, 2024
- SeenDa
Table of Contents
BOO09
2.4G Wireless keyboard
User’ s Manual
Note: Please read the user manual carefully before you startusing this
product
2AFW2-B009 2.4G Wireless Keyboard
Remark : Please according to the battery plus and minus to install batteries, please don’t charging the batteries, please don’t thrown in the fire, please don’t mixture different types batteries or old and new batteries, in order to avoid battery leakage or explosion. Please put the battery in a cool and dry place and keep away from children; please take out the battery if the electrical appliance long time out of use.
Operating System Instructions:
- Tuen the keyboard upside down, open the lid and remove the 2.4G Nano receiver.
- Insert twa AAA batteries as shown picture on the left. Close the batteries cover. ]
- Place 2.4G Nano receiver into USB port of your computer.
- Turn the keyboard upside down. open the power switch. the keyboard is ready foruse.
FN+
Technical Specifications
- Keyboard size : 291.91x 124.38x 19.7mm ¢ Sleep current : 0.002mA
- Working distance ; 10M «Sleep time : 3s
- Weight : 290g « Awaken way : Press any key
- Keyboard layout : 78 pes
- Working voltage : 3V
- Working current : 1.SmA(light off)
Status Display LED
- Low voltage indication light : red color
- Below 2.0V red tight will twinkle
- Caps lock : green
Troubleshooting
Please contact the after-sales service.
Copyright
It is forbidden to reproduce any part of this quick start guide without the
permission of seller.
Safety instructions Do not open or repair this device, Do not use the device
in a damp environment. Clean the device with a dry cloth.
Warranty
The device is provided with one-year limited hardware warranty from the
purchase day.
Keyboard Maintenance
- Please keep the keyboard away from liquid or humid environment, saunas, swimming pool, steam room and don’t let the keyboard get wet in the rain.
- Please don’t expose the keyboard at too high or too low temperature condition.
- Please don’t put keyboard under sun for a long time.
- Please don’t put keyboard close to the flame, such as cooking stoves, candles or fireplace.
- Avoid sharp objects scratching products, timely to recharge or replace the dry cell products to ensure the normal use.
FAQ
1.The 2.4G Nano receiver unrecognized ?
– If the 2.4G Nano receiver unrecognized, please check the USB interface is
functioning.
2.Why the red light always twinkle when in use ?
– The keyboard red light always twinkle when in use, indicates low power of
battery, please change new battery quickly.
3.The device display the 2.4G Keyboard is disconnecting ?
– The 2.4G wireless keyboard after some lime later not used, the tablet PC
will go into dormant mode to save battery power. Press any key to awake the
device.
4.Code missing?
– Please plug the 2.4 G Nano receiver again, after the computer has been
recognized, press the ESC*Ci key and open the keyboard of power switch, the
keyboard will be connected successfully.
FCC Statement-,
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment•, This equipment has been tested and found to comply with the limits•’ for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectiorw against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy 4′ and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by .! turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:. — Reorient or relocate the receiving antenna..’ — Increase the separation between the equipment and receiver…. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected..’ — Consult the dealer or an experienced radio/TV technician for help,’ This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..’
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>