SeenDa ISJ-DJC03 7-Color Backlit Wireless Keyboard User Manual

7-Color Backlit Wireless Keyboard

ISJ-DJC03

User Manual

20210716

Thank you very much for purchasing this backlit wireless Bluetooth keyboard Please email us if you have any questions or suggestions for this product. We will do our best to assist you.

Product Information

Bluetooth version: Bluetooth 5.1 Keyboard Working range: 10 M
Battery capacity: 1600 in
Working current (without backlight): 1.5 mA
Working hours (without backlight): 1000hours
Working current with the brightest backlight 200 mA
Working time with the brightest backlight: 8 hours
Charging time: 3 hours
Standby time: 2100 hours
Backlight sleep mode: after 2 minutes of not use
Keyboard sleep mode: after 30 minutes of not use

Package Content

• Backlit Wireless Bluetooth Keyboard’ 1
• Type C Charging Cable 1
•  User Manual • 1

LED Indicator Light

Press “Fn Lock”, the LED1 flashes a green light
Press “Caps Locks. the LED2 flashes green light
Press “Number Lock”, the LED3 flashes a green light
LED4 flickers red light slowly if the keyboard is under low battery
LED4 flashes red light while charging and will be off if fully charged

Back Light User Guide

• Press and hold the key. press shift key to adjust the brightness of the backlight Low-Mid-High-Oft
• Press and hold the key. press colors in total.

Warning

1. Do not squeeze, twist or hit the keyboard.
2. Do not put this product in a microwave, or strong magnetic field.
3. Prevent splashing, make sure the using environment is dry.
4. Please use soft dry cloth material to clean the keyboard. Remember to tum off the keyboard when not using it.

Troubleshooting Common Problems

1. Make sure your keyboard is fully charged before use.
2. Make sure your keyboard is in its working range. (11 yards)
3. Make sure you have turned on the Bluetooth function when you connect.
4. Make sure you have been successfully paired to the tablet.
5. Clean up the Bluetooth pairing devices on your laptop and try repairing them.
6. Do not pair multiple keyboards to the same device.

How to Connect my Device to 2 or 3 or*4 Channel

1. Hold and press then press a key to switch to the corresponding Bluetooth Channels, and then press Connect button until the LED indicator light flashes quickly. you can follow the connection steps of your device above to connect the keyboard.

2. When you successfully connected 2 or 3 or 4devices, you can switch among the devices easily by pressing the button

3. The keyboard supports auto-reconnect. It will automatically connect to the previous device when you turn on the keyboard. (make sure you have turned on the Bluetooth). If you connect the keyboard to two or three devices, when you turn on the keyboard, it will automatically connect to the last connected device.

iPad/iPhone Pairing Steps

1. → 1-Turn on the keyboard

2. Hold and press key, press key, LED1 Blue light will be on for 1s and then off.

3. Press and hold for 3s, LED1 blue light flashes quickly, your keyboard enters pairing mode and waiting for

4. Find “settings” on your device and turn on “Bluetooth’.

5. Find’Bluetooth 5.1 Keyboard”, click pair.

6. Click connected”, and your keyboard has been successfully connected to your device.

Please Note:
Once you have connected the keyboard, please follow the following step to finish the setup. Otherwise, they might not be able to function properly

Hua Wel Tablet Pairing Steps

1. → 1-Turn on the keyboard

2. Hold and press key, press key, LED1 Blue light will be on for 1s and then off.

3.  Press and hold for 3s. LED1 blue light flashes quickly, your keyboard enters pairing mode and waiting for

4. 5. This Bluetooth keyboard support auto-reconnect. Turn on the keyboard and it will automatically reconnect to the last connected device(Make sure you have turned on the Bluetooth)

Samsung Tablet Pairing Steps

1. → 1-Turn on the keyboard

2. Hold and press key, press key, LED1 Blue light will be on for 1s and then off.

3.  Press and hold for 3s. LED1 blue light flashes quickly, your keyboard enters pairing mode and waiting for

Pairing Steps For Tablet With Windows System

1. → 1-Turn on the keyboard

2. Hold and press key, press key, LED1 Blue light will be on for 1s and then off.

3.  Press and hold for 3s. LED1 blue light flashes quickly, your keyboard enters pairing mode and waiting for

Mac Pairing Steps

1. → 1-Turn on the keyboard

2. Hold and press key, press key, LED1 Blue light will be on for 1s and then off.

3.  Press and hold for 3s. LED1 blue light flashes quickly, your keyboard enters pairing mode and waiting for

4. Turn on Bluetooth on your device, search for “Bluetooth 5.1keyboard”, pair.

5. The keyboard connects in a few seconds.

6. This Bluetooth keyboard support auto-reconnect. Turn on the keyboard and it will automatically reconnect to the last connected device(Make sure you have turned on the Bluetooth)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>