seenDa IWG-WJK67FGT 2.4G Wireless Keyboard and Mouse Combo User Manual

2.4G Wireless Keyboard and Mouse Combo
User Manual

Product Specification

Dimensions: 427.35922.9` 12.18mm
Weight: 558g±10g
Connection: 2.4G Wireless Connection
Receiver type: USB Nano
Receiver Battery Capacity: 1600mAh
Working Current (without backlight): 2mA
Working Time (without backlight): 800 hours
Working Current(With the brightest backlight on):85mA
Working lime(With the brightest backlight on):18 hours
Standby Current: 50uA
Standby Time: 365 days
Backlight Off lime: 2 minutes without use
Keyboard Sleep lime: 30 minutes without use
Mouse Battery Capacity: 500mAh
Mouse DPI: 800-1200-1600
Battery saving: Enter sleep mode after 5 minutes without action.
Charging Time of Mouse: 3h
Charging Time of Keyboard: 3h
Attention:

1. If your keyboard or mouse is in low power condition, please charge it with included charging cable.
2. If your mouse won’t hold a charge even after fully charged, please replace the rechargeable 3.7V AA 14500 battery.

You will receive

How to set up

Step 1 : Plug the USB dongle into your computer. Step 2: Turn on the Power Switch on BOTH DEVICES.

Step 3: You have connected successfully, no drivers are needed.

• Press and hold the Fn first, Click, Scrlk Turn ON/OFF the backlight
• Press and hold the Fn first, Click PgUp + , Increase backlight brightness, 3 brightness levels adjustable
• Press and hold the Fn first, Click PgDn – , Decrease backlight brightness, 3 brightness levels adjustable

Thank you for purchasing our products. If you have any questions about this product, please contact us in the following ways: customer-service@seenda.com
LED Indicator of the Keyboard
Flashing Red: Low
Battery Solid Red: Charging
Light Off: Fully Charged
LED Indicator of the Mouse
Solid Red: Charging
Light Off: Fully
Charged If the battery is in low power condition, the mouse doesn’t work properly, pls charge in time.

How to repair the keyboard to the USB receiver

Step1: Pull out the USB receiver from your computer
Step2: Turn on the keyboard

Step 3: Press and hold the “ESC” and the “=” key together for 3-5 seconds.
Step 4: LED indicator for low battery/connection lights constantly.
Step5: Insert the USB receiver and place the keyboard as closely as possible to the USB receiver.
Step6: LED low battery indicator/connection goes off, the connection is successful.

How to repair the mouse to the USB receiver

Step 1: Take out the battery from the Mouse and turn it off for a complete reset. Turn off the power switch.
Step 2 : Put in the battery (make sure this one has enough power). Place the mouse as close as possible to the USB receiver while you do this.
Step 3: Turn on the mouse and wait for 3 seconds.
Step 4: The mouse will connect.

FAQ:

Q1: What should I do if the keyboard becomes sticky after a period of usage?
Al: This usually happens due to low power. Please charge the keyboard and try again. If this issue repeats, please contact us again.
Q2: What should I do if I can’t type with the keyboard?
A2: First, please make sure whether the keyboard can be turned on. If you can’t turn on the keyboard, Please charge the keyboard and try again, if it still won’t work, please contact us. If you can turn on the keyboard just it won’t type, please try repairing the Keyboard with the USB receiver.
Q3: What should I do if my mouse stopped working.
A3: First, please confirm whether the mouse can be turned on. If you can’t successfully turn on the mouse, Please charge the mouse and try again. If it can successfully turn on, try to use the repair method for the mouse.

WARNING

• Do not expose this product to water. Prevent liquid from entering this product.
• Water or humidity may cause short-circuit and damage this keyboard.
• Do not drop or hit this product. Shocks may damage the components inside.
• Do not put this product near extreme heat or fire.
• Do not try to disassemble or modify this product on your own.

WARRANTY COVERAGE

30-day unconditional money-back guarantee. If you are not completely satisfied with this product for any reason, Seenda will gladly refund your purchase price within 30 days of purchase (from the date of retail purchase).
1-year limited warranty. ONE(1) YEAR from the date of retail purchase. If a hardware defect arises (not due to personal alterations or attempted repairs) and a valid claim is received within the Warranty Period, Seenda will either:

1. Repair the product at no charge.
2. Exchange the product with a product that is new or which has been manufactured from serviceable used parts and is at least functionally equivalent to the original product.
3. Refund the purchase price of the product. Seed may request that you send the product back to our address for the replacement/refund. The location will change according to your area of residence. Please contact our customer service for confirmation.

Seed WILL NOT cover the shipping cost. Seed only offers warranty service for our official Amazon store and distributors. We need the order information, for example, the Amazon order number to verify your order.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>