SEENDA MOU-301 Wireless Trackball Mouse User Manual
- June 14, 2024
- SeenDa
Table of Contents
SEENDA MOU-301 Wireless Trackball Mouse
PRODUCT INFORMATION
MODEL NAME: 2.4G+Bluetooth+Bluetooth Wireless Ergonomic Trackball Mouse
What’s in Package
- 1 x Wireless Mouse
- 1 x USB Receiver
- 1 x Type C Charging Cable
- 1 x User Manual
Product Features
- A Left Button
- B Right Button
- C Forward Button
- D Backward Button
- E Trackball
- F Scroll Wheel
- G DPI Button
- H Charging / DPI Indicator
- I TYPE-C Charging Port
- J Bluetooth 2 Indicator
- K Bluetooth 1 Indicator
- L 2.4G Indicator
- M Switch Device Button
- N Power Switch
- O USB Receiver
2.4G USB Connection
- Turn on the power switch to ON.
- Take out the receiver.
- Press the mode switch button until the white light is on and enter 2.4G mode.
- Insert the USB receiver into your computer’s USB port.
Bluetooth Connection
- Turn on the power switch to ON.
- Press the mode switch button and switch to BT1 or BT2 mode, the white light flashes slowly.
- Press and hold the mode switch button for 3~5 seconds until the white light flashes quickly, then the mouse enters the Bluetooth pairing mode.
Windows 10 System
- Click “Bluetooth device”.
- Click “Add or remove a Bluetooth device”.
- Your computer will automatically search for “BT+2.4G MS” and then click “pair”.
- “BT+2.4G MS” is connected and can be used normally.
Мас OS System
Please complete the Bluetooth mode installation step 123 before pairing
- Click “System Preferences” on Mac.
- Click “Bluetooth” in “System Preferences”.
- Your computer will automatically find “BT+2.4G MS”, then click “pair”, and you can use it after installation.
iOS System
Only the system above iOS 13 supports the mouse function. Please complete the Bluetooth mode installation step 123 before pairing.
- Click Settings on your device, then turn on Accessibility.
- Click Touch.
- Turn on Assistive Touch.
- Click Settings on the device, then turn on Bluetooth.
- Your computer will automatically find “BT+24G MS”, then click
- “BT+2.4G MS” is connected and can be used normally.
Android system
Please complete the Bluetooth mode installation step 123 before pairing.
- Click Settings on the device, then turn on Bluetooth.
- Your computer will automatically find “BT+2.4G MS”, then click
- “BT+2.4G MS” is connected and can be used normally.
Charging Function Guide
- When the power is insufficient, the charging indicator and the corresponding channel indicator flash until it is turned off. Please connect the power supply for charging in time, and use the USB cable to connect the TYPE-C charging Port.
- Connect the charging cable to the USB port of the computer, the charging indicator is always on during charging, the charging time is about 1-3.5 hours and the indicator light turns off when charging is complete.
How to switch connection mode
After BT1, BT2, and 2.4G USB mode is connected, press the mode switch button on the bottom of the mouse to switch between multiple devices.
Wireless 1 Device Connection
Data parameters
Basic parameter:
- Movement Detection Technology: Optical
- Lithium Battery Capacity: 300mA
- DPI : 200-400-800-1200-1600
- Click Life : 3 million+
- Dimension : 134.4×98.2×47.2mm
- Weight : 136g
Bluetooth transmission parameters:
- Transmission distance : 10m
- Working Voltage: 3.7V
- Working current : 8mA
- Reaction rate: 125Hz
System requirement:
- Bluetooth-enable device
- Windows 8, Windows 10 or higher version
- Mac OS x 10.4 or higher version
- Android 4.3 or higher version
2.4G transmission parameters:
- Transmission distance: 20m
- Working Voltage : 3.7V
- Working current: 10mA
- Reaction rate: 250Hz
System requirement:
- An available USB port
- Windows XP, Windows 7, Windows 8, Windows 10 or higher version
- Mac OS x 10.4 or higher version
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>