Shuttle XC60J Series Fanless Apollo Lake SoC Mini PC Unveiled User Manual
- June 10, 2024
- Shuttle
Table of Contents
XC60J Series Fanless Apollo Lake SoC Mini PC Unveiled
User Manual User Manual
For the : XC60J Series
XC60J Series Fanless Apollo Lake SoC Mini PC Unveiled
Shuttle® XPC Installation Guide
Copyright
©2022 by Shuttle® Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a
retrieval system, translated into any language, or transmitted in any form or
by any means such as electronic, mechanical, magnetic, optical, chemical,
photocopy, manual, or otherwise, without prior written permission from
Shuttle® Inc.
Other brands and product names used herein are for identification purposes
only and may be trademarks of their respective owners.
Disclaimer
Shuttle® Inc. shall not be liable for any incidental or consequential damages
resulting from the performance or use of this product.
Shuttle® Inc. makes no representation or warranty regarding the contents of
this manual. Information in this manual had been carefully checked for
accuracy;however, no guarantee is given as to the correctness of the contents.
For continuing product improvement, Shuttle® Inc. reserves the right to revise
the manual or make changes to the specifications of this product at any time
without notice and obligation to any person or entity regarding such change.
The information contained in this manual is provided for general use by
customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must withstand any background interference including those that may cause undesired operation.
Trademarks
Shuttle is a registered trademark of Shuttle Inc.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice
Other brand and product names used herein are for identification purposes only
and may be trademarks of their respective owners.
Safety Information
Read the following precautions before setting up.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with
the same or equivalent as recommended by Shuttle. Disposal of used batteries
according to the manufacturer’s instructions.
Installation Notices
Do not place this device underneath heavy loads or in an unstable position.
Do not expose this device to high levels of direct sunlight, high-humidity or
wet conditions.
Do not use or expose this device around magnetic fields as magnetic
interference may affect the performance of the device.
Do not block the air vents to this device or impede the airflow in any way.
Driver and Software Installation
Motherboard Driver DVD
The DVD contents attached in XC60J Series motherboard are subject to change
without notice.
The Motherboard Driver DVD contains all the motherboard drivers necessary to
optimize the performance of this Shuttle Xvision in a Windows® OS. Install
these drivers after installing Microsoft® Windows®.
Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should
appear. If the AutoRun screen does not appear, double click on Autorun icon in
My Computer to bring up Shuttle Mainboard Software Setup screen.
Navigation Bar Description :
Auto Install Driver/Utility
User Manuals – Motherboard Manual, Quick Guide.
Link To Shuttle Website – Link to shuttle website homepage.
Browse This DVD – Allows you to see contents of this DVD.
User Manuals
Install Adobe Reader 9.5
MotherBoard Manual
Quick Guide
Appendix
Starting BIOS
AMIBIOS has been integrated into many motherboards for over a decade. In the
past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or
CMOS setup.
American Megatrends refers to this setup as BIOS. Specifically, it is the name
of the AMIBIOS8 BIOS setup utility. This chapter describes the basic
navigation of the BIOS
setup screens.
Enter the BIOS
To enter the BIOS setup screens, follow the steps below:
Step1. Power on the motherboard.
Step2. Press the
Step3. After you press the
You can access the other setup screens from the main BIOS setup menu, such as
the Chipset and Power menus.
This manual describes the standard look of the BIOS setup screen. The
motherboard manufacturer has the ability to change any and all of the settings
described in this manual. This means that some of the options described in
this manual do not exist in your motherboard’s AMIBIOS.
In most cases, the
BIOS Setup Menu
The main BIOS setup menu is the first screen that you can navigate. Each main
BIOS setup menu option is described in this user’s guide.
The Main BIOS setup menu screen has two main frames. The left frame displays
all the options that can be configured. “Grayed-out” options cannot be
configured. Options is blue can be.
The right frame displays the key legend. Above the key legend is an area
reserved for a text message. When an option is selected in the left frame, it
is highlighted in white.
Often a text message will accompany it.
AMIBIOS8 has default text messages built into it. The motherboard manufacture
retains the option to include, leave out, or change any of these text
messages. They can also add their own text messages. Because of this, many
screen shots in this manual are different from your BIOS setup screen.
The BIOS setup/utility uses a key-based navigation system called hot keys.
Most of the BIOS setup utility hot keys can be used at any time during the
setup navigation process. These keys include
| Hot Key | Description |
|---|
→ Left
← Right| The Left and Right
↑ Up
↓ Down| The Up and Down
+- Plus/Minus| The Plus and Minus
Tab| The
Fl| The
F4| The
ESC| The
Enter| The
Main Setup
When you first enter the BIOS Setup Utility, you will enter the Main setup
screen. You can always return to the Main setup screen by selecting the Main
tab. There are two Main Setup options. They are described in this section. The
Main BIOS Setup screen is shown below.
System Time/System Date
Use this option to change the system time and date. Highlight System Time or
System Date using the
The date must be entered in MM/DD/YY format.
The time is entered in HH:MM:SS format.
The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and
5:30 P.M. as 17:30:00.
Advanced
Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS
Setup screen. You can select any of the items in the left frame of the screen,
such as CPU Configuration, to go to the sub menu for that item.
You can display an Advanced BIOS Setup option by highlighting it using the
Security
Select the Security tab from the BIOS setup screen to enter the Security BIOS
Setup screen. You can display an Security BIOS Setup option by highlighting it
using the
The Security Setup screen is shown below. The sub menus are documented on the
following pages.
Supervisor Password
Indicates whether a supervisor password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
User Password
Indicates whether a user password has been set. If the password has been
installed, Installed displays. If not, Not Installed displays.
Administrator Password
Select Change Supervisor Password from the Security Setup menu and press
Boot
Select the Boot tab from the BIOS setup screen to enter the Boot BIOS Setup
screen.
You can select any of the items in the left frame of the screen, such as Boot
Settings Configuration, to go to the sub menu for that item.
You can display an Boot BIOS Setup option by highlighting it using the
All Boot BIOS Setup options are described in this section.
The Boot BIOS Setup screen is shown below. The sub menus are described on the
following pages.
Bootup Num-Lock
Select NumLock state after system bootup.
The choice: Enabled , Disabled.
Fast Boot Function
This item allows you to enable or disable Fast Boot Function.
The choice: Enabled , Disabled.
Boot from USB device
This item allows you to enable or disable boot from USB device.
The choice: Enabled , Disabled.
OS Selection
Choice OS version.
The choice: Windows 10 , DOS.
Boot Device Priority (Boot Option #1/2/3/….)
Specifies the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in the corresponding type menu.
Exit
Select the Exit tab from the BIOS setup screen to enter the Exit BIOS Setup
screen.
You can display an Exit BIOS Setup option by highlighting it using the
All Exit BIOS Setup options are described in this section.
The Exit BIOS Setup screen is shown below.
Save Changes and
Exit
When you have completed the system configuration changes, select this option
to leave BIOS Setup and reboot the computer so the new system configuration
parameters can take effect.
Select “Save Changes and Exit” from the Exit menu and press
Save Configuration Changes and Exit Now?
[Ok] [Cancel] appears in the window. Select Ok to save changes and exit.
Exit Without Saving Changes
Exit system setup without saving any changes.
Load Defaults Settings
Load Optimal Default values for all the setup questions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>