Shuttle X50V8 XPC all-in-one PC User Manual

June 3, 2024
Shuttle

Shuttle-logo

Shuttle X50V8 XPC all-in-one PC

Shuttle-X50V8-XPC-all-in-one-PC-product

XPC Installation Guide

Copyright

©2022 by Shuttle® Inc. All Rights Reserved.

No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc. Other brands and product names used herein are for identification purposes only and may be trademarks of their respective owners.

Disclaimer
Shuttle® Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product. Shuttle® Inc. makes no representation or warranty regarding the contents of this manual. Information in this manual had been carefully checked for accuracy; however, no guarantee is given as to the correctness of the contents. For continuing product improvement, Shuttle® Inc. reserves the right to revise the manual or make changes to the specifications of this product at any time without notice and obligation to any person or entity regarding such change. The information contained in this manual is provided for general use by customers.

This device complies to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must withstand any background interference including those that may cause undesired operation.

Trademarks
The shuttle is a registered trademark of Shuttle Inc. Intel and Pentium are registered trademarks of Intel Corporation. PS/2 is a registered trademark of IBM Corporation. AWARD is a registered trademark of Award Software Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice
Other brand and product names used herein are for identification purposes only and may be trademarks of their respective owners.

Safety Information

Read the following precautions before setting up.

CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent type recommended by the manufacturer. Disposal of used batteries according to the manufacturer’s instructions.

Installation Notices

  • Do not place this device underneath heavy loads or in an unstable position.
  • Do not expose this device to high levels of direct sunlight, high humidity, or wet conditions.
  • Do not use or expose this device around magnetic fields as magnetic interference may affect the performance of the device.
  • Do not block the air vents to this device or impede the airflow in any way.

Driver and Software Installation

Motherboard Driver DVD
The DVD contents attached in the X50V8 Series motherboard are subject to change without notice.

The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this Shuttle Xvision in a Windows® OS. Install these drivers after installing Microsoft® Windows®. Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear. If the AutoRun screen does not appear, double-click on the Autorun icon in My Computer to bring up the Shuttle Mainboard Software Setup screen.

Navigation Bar Description:

  • Auto Install Driver.
  • Install Intel Rapid Storage Tech. Driver.
  • Install eGalax Touch Panel Driver.
  • User Manuals – Motherboard Manual, Quick Guide.
  • Link To Shuttle Website – Link to shuttle website homepage.
  • Browse This DVD – Allows you to see contents of this DVD.Shuttle-X50V8-XPC-all-in-one-PC-fig-1

User Manuals

  • Install Adobe Reader 9.5
  • MotherBoard Manual
  • Quick GuideShuttle-X50V8-XPC-all-in-one-PC-fig-2

Appendix

Starting BIOS
AMIBIOS has been integrated into many motherboards for over a decade. In the past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS setup. American Megatrends refers to this setup as BIOS. Specifically, it is the name of the AMIBIOS BIOS setup utility. This chapter describes the basic navigation of the BIOS setup screens.

Enter the BIOS
To enter the BIOS setup screens, follow the steps below:

  • Step1. Power on the motherboard.
  • Step2. Press the key on your keyboard when you see the following text prompt: Press DEL to run Setup.
  • Step3. After you press the key, the main BIOS setup menu displays. You can access the other setup screens from the main BIOS setup menu, such as the Chipset and Power menus.

This manual describes the standard look of the BIOS setup screen. The motherboard manufacturer has the ability to change any and all of the settings described in this manual. This means that some of the options de-scribed in this manual do not exist in your motherboard’s AMIBIOS. In most cases, the

key is used to invoke the BIOS setup screen. There are a few cases that other keys are used, such as ,, and so on.
BIOS Setup Menu

The main BIOS setup menu is the first screen that you can navigate. Each main BIOS setup menu option is described in this user’s guide. The Main BIOS setup menu screen has two main frames. The left frame displays all the options that can be configured. “Grayed-out” options cannot be configured. Options is blue can be. The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white.

Often a text message will accompany it.

AMIBIOS has default text messages built into it. The motherboard manufacturer retains the option to include, leave out, or change any of these text mes- sages. They can also add their own text messages. Because of this, many screenshots in this manual are different from your BIOS setup screen. The BIOS setup/utility uses a key-based navigation system called hotkeys. Most of the BIOS setup utility hot keys can be used at any time during the setup navigation process. These keys include , , , , keys, and so on.

There is a hotkey legend located in the right frame on most BIOS setup screens.

Hot Key Description

→ Left

← Right

| The Left and Right keys allow you to select a BIOS setup screen. For example: Main screen, Advanced screen, Chipset screen, and so on.
↑ Up

↓ Down

| The Up and Down keys allow you to select an BIOS setup item or sub- screen.
+- Plus/ Minus| The Plus and Minus keys allow you to change the field value

of a particular setup item. For example: Date and Time.

Tab| The key allows you to select BIOS setup fields.
F1| The key allows you to display the General Help screen. Press the key to open the General Help screen.

F4

| The key allows you to save any changes you have made and exit BIOS Setup. Press the key to save your changes. Press the

key to save the configuration and exit. You can also use the key to select Cancel and then press the key to abort this function and return to the previous screen.

ESC

| The key allows you to discard any changes you have made and exit the BIOS Setup. Press the key to exit the BIOS setup without saving your changes. Press the key to discard changes and exit. You can also use the key to select Cancel and then press the key to abort this function and return to the previous screen.

Enter

| The key allows you to display or change the setup option listed for a particular setup item. The key can also allow you to display the setup sub-screens.

Main Setup

When you first enter the BIOS Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below.Shuttle-X50V8-XPC-all-in-one-PC-
fig-3

System Time/System Date
Use this option to change the system time and date. Highlight System Time or Sys-tem Date using the keys. Enter new values through the keyboard. Press the key or the keys to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format.

The time is in a 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

Advanced
Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages.Shuttle-X50V8-XPC-all-in-one-PC-fig-4

TPM ConfigurationShuttle-X50V8-XPC-all-in-one-PC-
fig-5

Security Device Support
This item allows you to enable or disable fTPM.

  • The choice: Enabled, Disabled.

Power Management ConfigurationShuttle-X50V8-XPC-all-in-one-PC-
fig-6

Wake Up By USB (S3)
This item allows you to enable or disable system wake-up by USB (S3).

  • The choice: Enabled, Disabled.

EuP Function
This item allows you to enable or disable the system EuP function in S4/S5.

  • The choice: Enabled, Disabled.

Power-On after Power-Fail
This item allows you to set system power on automatically after AC power restored.

  • The choice: Power On, Former-sts, Power Off, Power On by LAN, Power On by RTC.

Wake Up By LAN
This item allows you to enable or disable system wake on by onboard LAN chip.

  • The choice: Enabled, Disabled.

PowerOn by RTC Alarm
When enabled, System will wake on the hr::min::sec specified.

  • The choice: Enabled, Disabled.

CPU Configuration

You can use this screen to select options for the CPU Configuration Settings. Use the up and down keys to select an item. Use the and keys to change the value of the selected option. A description of the selected item appears on the right side of the screen. The settings are described on the following pages. An example of the CPU Configuration screen is shown below.

The CPU Configuration setup screen varies depending on the installed processor .Shuttle-X50V8-XPC-all-in-one-PC-fig-7

Software Guard Extensions (SGX)
This item allows you to enable or disable Software Guard Extensions.

  • The choice: Enabled, Disabled, Software Controlled.

Intel(R) V. T.
When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology.

  • The choice: Enabled, Disabled.

CPU support, the item appears.

Intel(R) HT Technology
This item allows you to enable or disable Intel(R) HT Technology.

  • The choice: Enabled, Disabled.

Intel(R) Speed Shift Technology
This item allows you to enable or disable Intel(R) Speed Shift Technology(ISST).

  • The choice: Enabled, Disabled.

C State Support
This item allows you to enable or disable CPU C State.

  • The choice: Enabled, Disabled.

EIST
This item allows you to enable or disable Enhanced lntel SpeedStep(R) Technology.

  • The choice: Enabled, Disabled.

Turbo Mode
This item allows you to enable or disable Turbo Mode.

  • The choice: Enabled, Disabled.

The CPU Configuration setup screen varies depending on the installed processor.

SATA Configuration

Shuttle-X50V8-XPC-all-in-one-PC-fig-8

OnBoard Device Configuration

Shuttle-X50V8-XPC-all-in-one-PC-fig-9

M.2 Device Select
M.2 PCIe and SATA device selection.

  • The choice: Auto, PCIE, SATA.

High Definition Audio
This item allows you to enable or disable system High Definition Audio.

  • The choice: Enabled, Disabled.

CNVi Function
This item allows you to enable or disable the CNVi module.

  • The choice: Enabled, Disabled.

Onboard LAN Function
This item allows you to enable or disable LAN Function.

  • The choice: Enabled, Disabled.

Onboard LAN BOOT ROM
This item allows you to enable or disable Onboard LAN BOOT ROM.

  • The choice: Enabled, Disabled.

IGD Memory Size Select
Allows you to select the size of system memory used by the internal graphics device.

  • The choice: 32MB, 64MB, 128MB, 256MB, 512MB.

Intel(R) VT-d
This item allows you to enable or disable Intel(R) VT-d.

  • The choice: Enabled, Disabled.

Serial Port Configuration
Options are in its sub-menu.

  • Pressto enter the sub-menu of detailed options.Shuttle-X50V8-XPC-all-in-one-PC-fig-10

Serial Port 1/2/3/4
Enabled/Disabled Serial Port(COM).

  • The choice: Enabled, Disabled.

Serial Port 1/2/3/4 Address
The choice: 3E8h, 3E0h, 3A8h, 3A0h

Serial Port 1 Mode
COM mode select.

  • The choice: RS232, RS422, RS485.

Parallel Port
Enalbed/Disabled Parallel Port.

  • The choice: Enabled, Disabled.

Parallel Port Address

  • The choice: 378h, 278h, 3BCh

Parallel Port Mode

  • Printer mode select.

The choice: SPP, EPP, ECP, EPP + ECP.

Hardware Health Configuration

Shuttle-X50V8-XPC-all-in-one-PC-fig-11

Boot
Select the Boot tab from the BIOS setup screen to enter the Boot BIOS Setup screen. You can select any of the items in the left frame of the screen, such as Boot Settings Configuration, to go to the sub menu for that item. You can display a Boot BIOS Setup option by highlighting it using the keys. All Boot BIOS Setup options are described in this section. The Boot BIOS Setup screen is shown below. The sub menus are described on the following pages .Shuttle-X50V8-XPC-all-in-one-PC-fig-12

Bootup Num-Lock
Select NumLock state after system bootup.

  • The choice: Enabled, Disabled.

Boot from a USB device
Enabled/Disabled onboard USB storage boot function.

  • The choice: Enabled, Disabled.

Boot from Card-Reader
Enabled/Disabled onboard Card-Reader boot function.

  • The choice: Enabled, Disabled.

Fast Boot Function
This item allows you to enable or disable the Fast Boot Function.

  • The choice: Enabled, Disabled.

Boot Device Priority (Boot Option #1/2/3/….)
Specifies the boot sequence from the available devices. A device enclosed in parenthesis has been disabled in the corresponding type menu.

Security
Select the Security tab from the BIOS setup screen to enter the Security BIOS Setup screen. You can display a Security BIOS Setup option by highlighting it using the keys. All Security BIOS Setup options are described in this section. The Security Setup screen is shown below. The sub- menus are documented on the following pages.Shuttle-X50V8-XPC-all-in-one-PC-
fig-13

Supervisor Password
Indicates whether a supervisor password has been set. If the password has been installed, Installed displays. If not, Not Installed displays.

User Password
Indicates whether a user password has been set. If the password has been in- stalled, Installed displays. If not, Not Installed displays.

Change Supervisor Password
Select Change Supervisor Password from the Security Setup menu and press

.

Enter New Password:
Type the password and press . The screen does not display the characters entered. Retype the password as prompted and press . If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after BIOS completes.

Change User Password
Select Change User Password from the Security Setup menu and press .

Enter New Password:
Type the password and press . The screen does not display the characters entered. Retype the password as prompted and press . If the password confirmation is incorrect, an error message appears. The password is stored in NVRAM after BIOS completes.

Password Login control
This item allows the user to adjust the Password Login control.

  • The choice: Setup, Boot, Both.

Flash Write Protection
Choose [Enabled] to avoid virus destroy BIOS. If you want to flash BIOS, you must set it [Disabled].

  • The choice: Enabled or Disabled.

Secure Boot Control
This item allows user to enable/disable Secure Boot function.

  • The choice: Enabled or Disabled.

Exit
Select the Exit tab from the BIOS setup screen to enter the Exit BIOS Setup screen. You can display an Exit BIOS Setup option by highlighting it using the

keys. All Exit BIOS Setup options are described in this section. The Exit BIOS Setup screen is shown below.![Shuttle-X50V8-XPC-all-in-one-PC- fig-14](https://manuals.plus/wp-content/uploads/2022/10/Shuttle-X50V8-XPC-all- in-one-PC-fig-14.png)

Save Changes and Exit
When you have completed the system configuration changes, select this option to leave BIOS Setup and reboot the computer so the new system configuration parameters can take effect. Select “Save Changes and Exit” from the Exit menu and press . Save Configuration Changes and Exit Now? [Ok] [Cancel] appears in the window. Select Ok to save changes and exit.

Exit Without Saving Changes
Select “Exit without Saving Changes” from the Exit menu and press . Select Ok to discard changes and Exit.

Load Defaults Settings
BIOS automatically sets all BIOS Setup options to a complete set of default settings when you Select this option. The Optimal settings are designed for maximum system performance, but may not work best for all computer applications. In particular, do not use the Optimal BIOS Setup options if your computer is experiencing system configuration problems. Select Load Optimal Defaults from the Exit menu and press . Select Ok to load optimal defaults.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals