SOUNDPEATS Opera 05 Wireless Earbuds User Guide
- June 10, 2024
- SoundPEATS
Table of Contents
Opera 05 Wireless Earbuds
User Guide
Pairing
- Please open the charging case, then long press the button for 3S on the side of the charging case until the indicator light of the charging case flashes white, then the two eorbuds enter the pairing state.
- Turn on the Bluetooth of your device and select SOUNDPEATS Opera05 to complete the poking.
Reast
- Ploce the earbuds back into the charging case, and make sure they ore correct placed.
- When the charging box Is open, press and hold the button on the side of the charging box for 10S until the red and white light of the charging box alternately fiashs Twice, and the reset is completed.
- Please close the charging case and open it again, the earbuds are activated .
Wearing
- Identify the left and the right earbuds.
- Rotate the earbuds and find the most comfortable position.
Product Diagram
Touch Control
Power On| Auto: Open the charging case. the earphones turn on outiimatiCCrly.
Manually: Under power oft state of the earbuds. press and hold the
multifunctional button for 1.5S.
---|---
Power Off| Auto: Put the ea turfs bock to the charging cose and close the
case. Earphones turn off automatically. Manually: Under power on state of the
earbuds. press and hold the multifunctional button for 10.5.
Play/Pause| Double-tap on the multifunctional button
Volume-| Single-tap on the left multifunctional button
Volume+| Single-tap on the right multifunctional button
Next Track| Press and hold the right multifunctional button for 1.5s
Noise Reduction Mode / Transparent Mode / Normal Mode Switching| Press and
hold the left multifunctional button for 1.5s
Answer/Hang Up a Phone Call| Double-tap on the multifunctional button
Reject a Phone Call| Press and hold the multifunctional button for 1.5s
Switch Between Two Active Calls| Press and hold the multifunctional button for
1.5s
Activate the Voice Assistant| Triple-tap the right multifunctional button
Q&A
Ql: What does the charging box indicator mean?****
– 1 Charging case power display description:
100%-50%…………………………… shows green fight.
49%-10% ……………………………shows yelow light
Below 10% ……………………………shows red light.
– 2. When charging the charging case, the Indicator light shows:
Below 20%…………………………… red ight flashes slowly
20%-69% ………………………………..yellow fight flashes slovAy.
70%-99% ……………………………….green light flashes slowly
100% ……………………………………………green light is keeps on.
Q2: How to charge the charging case?****
– 1. Connect the Type-C charging adapter to charge it (charging current should not over 1A).
– 2. When not in use for a long time, charge it at least once every three months.
Q3: Why is the earbuds still connected to the phone when the charging box is closed?****
– 1. There is no remaining power in the charging case. When the charging case
is out of power. the earbuds can’t disconnect even if they put back to the
charging case.
– 2. Please make sure the earbuds are properly placed in the charging case and
the charging metal and PIN are clean, please try to clean the charging case
and earbuds charging contact area with a soft cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful Interference in a
residential Installation. This equipment generates uses and can radiate radio
frequency energy and, If not Installed and used In accordance with the
Instructions. may cause harmful Interference to radio communications. However,
there Is no guarantee that interference will not occur In a particular
Installation. If this equipment does cause harmful Interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user Is encouraged to try to correct the Interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device compiles with part 15 of the FCC rules. Operation Is subject to the following two conditions:
- This device may not cause harmful Interference.
- this device must accept any Interference received, Including interference that may cause undesired operation.
Changes or modffcations not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference thatmay cause undesired operation of the device.’
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square
Chuangye Road, Longhua District, Shenzhen, China. 518109
support@soundpeats.com
www.soundpeats.com
FCC ID: 2AFTU-DD032 IC ID: 27785-YK004
MADE IN CHINA
EC REP
Company: Qing UG(haftungsbeschrankt)
Address: Undinestr. 7,12203 Berlin Germany
UK REP
TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd
Mid Glamorgan, CF37 2RR,
UK tanmetbiz@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>