2Boom BX116 5W Bluetooth Speaker Instruction Manual
- June 10, 2024
- 2Boom
Table of Contents
BX116 5W Bluetooth Speaker
Instruction Manual
BX116 5W Bluetooth Speaker
Carefully read User Guide to operate this unit properly Keep for future
reference.
You are welcome to purchase.
To ensure the safe use of this product and to achieve the best results, please
read this manual carefully.
This product can be connected to PC, TV, CD, VCD, DVD, TUNER, TAPE, USB, TF,
BT and other audio equipment, it is easy to carry, multi-functional with
perfect design, excellent sound quality performance, we believe it will bring
you New feeling.
Warm prompt
When charging the unit, please turnoff the power switch. so as not to damage
the battery, do not constantly use the machine for a long time. In order to
keep the battery in good condition, Please charge and discharge the battery
for every 30 days or so.
Technical Parameters
Bluetooth version: V5.0
Driver size: 3in
Driver output: 5W
Distance: 32.8h
Frequency Response: 100Hz-18kHz
Battery: 500mAh
Playing time: 1-1.5 hours (50% volume)
Charge time: 2-3 hours 5/N: > 80db
FCC ID: 2AIDL-8X116
PANEL FUNCTION DECLARATION
- Play/Pause (FM: Automatic search)
- Previous song. Press the button for a second to lower the volume.(FM: Previous channel)
- Next song Press the button for a second to enlarge the volume.(FM: The next channel)
- Short press: Switch modes between USB/TF/FM/BT Long press: Change Light modes and turn ON/OFF light.
- Charging socket (DC 5V) 6. USB socket 7.Micro SD card socket 8.0FF/ON Speaker power off , speaker power on
Connect to BT
- Click the “MODE’ button for Bluetooth mode
- Turn on your smartphone’s BT and search for the device and select ‘2BOOM-BX116″.
- Connect with Model. Click the “ok” on smartphone. Voice notice appear when connected successfully. (play and select music with smartphone when connected through BT).
Micro SD Function
- Press “MODE” button on the product to switch to TF mode or just insert a Micro SD card. TF mode will start automatically
- Press “PLAY/PAUSE” button to continue play/pause music.
- Press “NEXT” button to go to next song.
- Press “PREVIOUS” to go back to previous song.
USB Function
- Press “MODE” button on the product to switch to USB mode or just insert a USBfl ash drive. USB mode will start automatically
- Press “PLAY/PAUSE” to continue play/pause music.
- Press “NEXT” button to go to next song.
- Press “PREVIOUS” to go back to the previous song.
- FM Radio Function Press “MODE- on the product to switch to FM mode Radio will start automatically Press “PLAY/PAUSE” button for seconds to enter automate FM channel searching. Shon press the button again to stay on the channel you want.
Press ‘NEXT” button to go to next frequency.
Press ‘PREVIOUS” to go back to previous frequency.
TWS Function
• Turn on speakers. Long press the “PAUSE” button. After an indication voice,
two speaker could be connected with a same bluetooth device and then play
music together. Long press the ‘PAUSE’ button again to cancel TWS function
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Notes: This equipment has been tested and found to comply with the limits
for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ N technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>