FORTINET FortiGate 3700F Series High Performance Next Generation Firewall User Guide
- June 10, 2024
- FORTINET
Table of Contents
FORTINET FortiGate 3700F Series High Performance Next Generation Firewall User Guide
Before you begin
Register your device to access FortiGuard updates, cloud management, firmware
upgrades, technical support and warranty coverage.
https://support.fortinet.com
FortiExplorer App
Rapidly provision, deploy, and monitor Security Fabric components including
FortiGate and Forti WiFi devices from your mobile. Download now for free.
https://links.fortinet.com/fortiexplorer/downloads
Scan the QR Code or visit: https://links.fortinet.com/fortiexplorer/downloads
This guide covers: FG-37001FF, aFnGd-3F7G0-03F7,0F1GF-3701F-DC, and FG-3700F-
DC
March 27, 2023
Copyright© 2023 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
The Essentials
Default Logins
https://192.168.1.99 Username: admin Password: leave blank
MGMT1 IP is 192.168.1.99
MGMT2 IP is 192.168.2.99
Admin Guide
For a detailed Getting Started guide, setup and configuration information,
refer to the Admin Guide on https://docs.fortinet.com/
Customer Service
For contracts, licensing, product registration and account management, contact
FortiCare Support at https://www.fortinet.com/support/contact
Self-service Resources
Access our knowledge base, forums, videos and technical experts at
https://www.fortinet.com/support/support-services/forticare-support
Thank you for choosing Fortinet
Package Contents
FortiGate 3700F Series
FFGG–33770001FF, aFnGd-3F7G0-03F7,0F1GF-3701F-DC and FG-3700F-DC
Setup
Unpack the box, power the device and choose one of the following options:
SFP Modules
Installation
Removal
Desktop Installation
Note: Place the device on a flat, clean and stable surface.
Rack Installation
Note: The
recommended clearance is 1.5 inches above and below the device in a 19 inch
rack.
Caution: To avoid personal injury or damage to the device, it is
recommended that two or more people mount the device on a rack.
FG-3700F Series Front Panel
Note: The FG-3701F includes a vented hole SSD cover with rivets.
FG-3700F Series Rear Panel AC Model
FG-3700F Series Rear Panel DC Model
Cautions and Warnings
Environmental specifications Ambient operating temperature: 0°C to 40°C
Rack Mount Instructions – The following or similar rack-mount instructions are
included with the installation instructions:
Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.
Mechanical Loading – Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.
Circuit Overloading – Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable Earthing – Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
Refer to specific Product Model Data Sheet for Environmental Specifications (Operating Temperature, Storage Temperature, Humidity, and Altitude)
Safety
Moving parts — Hazardous moving parts. Keep away from moving fan blades.
Warning: Equipment intended for installation in Restricted Access Location.
Warning: A readily accessible disconnect device shall be incorporated in the building installation wiring.
Warning: A UL Listed external disconnect device, i.e. circuit breaker or other, with over current protection suitable for local code (rated 6A recommended) shall be installed with this equipment.
Battery Risk of explosion if the battery is replaced by an incorrect type.
Do not dispose of batteries in a fire. They may explode. Dispose of used
batteries according to your local regulations.
IMPORTANT: Switzerland: Annex 4.10 of SR814.013 applies to batteries.
CAUTION: Shock Hazard. Disconnect all power sources.
Grounding — To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing.
Caution: Slide/rail mounted equipment is not to be used as a shelf or a work
space.
Warning: Stability hazard.
The rack may tip over causing serious personal injury.
Before extending the rack to the installation position, read the installation instructions.
Do not put any load on the slide-rail mounted equipment in the installation position.
Do not put any load on the slide-rail mounted equipment in the installation position.
Do not leave the slide-rail mounted equipment in the installation position.
Laser Class 1 optical transceiver shall be used only
IEC 60825-1:2014 transfer to FDA/CDRH Complies with FDA performance standards
for laser products except for conformance with IEC 60825-1 Ed.3., as described
in Laser Notice No. 56, dated May 8, 2019.
The SFP ports should use UL Listed Optional Transceiver product, Rated 3.3Vdc,
Laser Class 1.
Fiber optic transceiver must be rated 3.3V, 22mA max, Laser Class 1, UL certified component.
Warning: Class I Equipment. This equipment must be earthed. The power plug must be connected to a properly wired earth ground socket outlet. An improperly wired socket outlet could place hazardous voltage on accessible metal parts.
Warning: All Ethernet cables are designed for intra-building connection to other equipment. Do not connect these ports directly to communication wiring or other wiring that exits the building where the appliance is located.
Regulatory Notices
Federal Communication Commission (FCC) USA
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received; including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and if it is not
installed and used in accordance with the instruction manual, it may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the
user will be required to correct the interference at his own expense.
WARNING: Any changes or modifications to this product not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
Industry Canada Equipment Standard for Digital Equipment (ICES) Canada
CAN ICES-003 (A) / NMB-003 (A)
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications.
This radio transmitter (Contains IC:7280B-111T15H) has been approved by ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.
European Conformity (CE) – EU
This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
The product transmits within the frequency ranges and less than or equal to the power listed below:
2402-2480MHz less than 20dBm
Simplified EU Declaration of Conformity
This declaration is only valid for Fortinet products (including combinations
of software, firmware and hardware) provided by Fortinet or Fortinet’s
authorized partners to the end-customer directly for use within the EU or
countries that have implemented the EU Directives and/or spectrum regulation.
Any Fortinet products not obtained directly from Fortinet or Fortinet’s
authorized partners may not comply with EU Directives and Fortinet makes no
assurances for such products.
Note: The full Declaration of Conformity for this product is available in the link below: https://site.fortinet.com/ProductRegulatory/EU
Compliance with 2014/53/EU Radio Equipment Directive (RED).
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table
provides information on the frequency bands used and the maximum e.i.r.p. of
the product for sale in the EU:
Frequency Range (MHz) Bluetooth 2.4GHz
Maximum e.i.r.p. (dBm) 4.56
UK Conformity Assessed (UKCA) United Kingdom
The product transmits within the frequency ranges and less than or equal to
the power listed below: 2402-2480MHz less than 20dBm This equipment should be
installed and operated with minimum distance 20cm between the radiator & your
body. This product is in compliance with Statutory Instrument 1206 Radio
Equipment Regulations 2017 The full Declaration of Conformity for this product
is available in the link below:
https://site.fortinet.com/ProductRegulatory/UK
References
- Global Leader of Cybersecurity Solutions and Services | Fortinet
- Product Downloads | Fortinet Product Downloads | Support
- Welcome
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>