Kanlux 33695 GLASI LED Recessed Light Fitting Instruction Manual

33695 GLASI LED Recessed Light Fitting

Product Information

• Product Name: GLASI LED
• Model: P1, P2, P3, P4, P5, P6, P7, P8, P9, P10, P11, P12, P13, P14, P15, P16, P17, P18, P19, P20, P21
• Size: A3-297x420mm/ISO216
• Website: www.kanlux.com
• Power Consumption: 3W
• Voltage: 220-240V~ 50Hz
• Luminous Flux: 130lm – 250lm
• Color Temperature: 3000K (P WW) / 4000K (P NW)
• Rated Life: 30,000 hours
• Color Rendering Index (CRI): ellipse 6x MacAdam
• Ingress Protection Rating: IP44

Product Usage Instructions

The GLASI LED is designed for indoor use in homes and for general consumer purposes. Failure to follow the instructions may result in fire, electric shock, physical injury, and other material
and immaterial damages. For additional information on Kanlux products, visit the website: www.kanlux.com. Kanlux SA is not responsible for any consequences resulting from failure to comply with these instructions. Kanlux SA reserves the right to modify the instructions. The latest version is available on the website www.kanlux.com.

Installation

1. Ensure that the power is turned off before installing the GLASI LED.
2. Mount the GLASI LED on a surface with a minimum IP44 rating.
3. Connect the GLASI LED to a voltage source of 220-240V~ 50Hz using 2 x 0.75mm2 wires (L and N).

Usage

• Do not use the GLASI LED outdoors or in damp or wet locations.
• Do not touch the GLASI LED while it is in operation, as it may be hot.
• Do not disassemble or modify the GLASI LED.
• Do not expose the GLASI LED to extreme temperatures or humidity.

INTENDED USE / APPLICATION

Product designed for the use in households and for other similar general applications.

MOUNTING

Technical changes reserved. Read the manual before mounting. Mounting should be performed by an appropriately qualified person. Any activities to be done with disconnected power supply. Exercise particular caution. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical power prior to first use. The product can be connected to a supply network which meets energy quality standards as prescribed by law.

FUNCTIONAL CHARACTERISTICS

Product can be used either indoors or outdoors.

USAGE GUIDELINES / MAINTENANCE

Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. Product must not be used in unfavourable environment, e.g. dust, moisture,water, vibrations, etc.

EXPLANATIONS OF SYMBOLS USED

• P1: Rated voltage, frequency.
• P2: Rated power.
• P3: Rated luminous flux.
• P4: The specified luminous flux refers to the light source (LED module) used.
• P5: Rated durability.
• P6: Certificate of Conformity confirming the quality of production in accordance with approved standards on the territory of the Customs Union.
• P7: Colour temperature.
• P8: Class II. A product in which protection against electric shock is provided not only through basic insulation, but also double or reinforced insulation.
• P9: Protection against solid foreign objects bigger than 1,0mm provided. Protection against splashing water provided.
• P10: Product can be used either indoors or outdoors.
• P11: The symbol describes the minimal distance of a light fixture (its light source) from the spots and objects that it’s illuminating.
• P12: The product is not compatible with lighting dimmers.
• P13: Product meets the requirements of EU directives.
• P14: The chipped globe, screen or protective shield must be replaced immediately.
• P15: Environmental operating temperature range that the product can be exposed to.
• P16: Caution, risk of electric shock.
• P17: The product is compliant with all relevant United Kingdom regulations.
• P18: This product is equipped with a light source with energy efficiency class F.
• P19: The LED light source can only be replaced by qualified personnel (Kanlux service only).
• P20: Any control panel or control equipment can only be replaced by qualified personnel (Kanlux service only).

ENVIRONMENTAL PROTECTION

Keep your environment clean. Segregation of post-packaging waste is recommended. P21: This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health, and require a special form of recycling/neutralising. Products labelled in this way should be returned to a collection facility for waste electrical and electronic goods. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.

COMMENTS / GUIDELINES

Failure to follow these instructions may result in e.g. fire, burns, electrical shock, physical injury and other material and non-material damage. For more information about KANLUX products visit www.kanlux.com. Kanlux SA shall not be responsible for any damage resulting from the failure to follow these instructions. Kanlux SA reserves the right to make changes in the manual – the current version can be downloaded at www.kanlux.com.

INSTALLATION INSTRUCTION

Visit at: www.kanlux.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>