Knightsbridge NH0183BD Up and Down Wall Light Instruction Manual
- June 10, 2024
- Knightsbridge
Table of Contents
Knightsbridge NH0183BD Up and Down Wall Light
Product Information
The NH0183BD and NH0184SQ are electrical products that come with an installation and maintenance manual. The installation manual provides general instructions for installation and maintenance, while the product itself consists of three wires – Live (brown), Earth (green/yellow), and Neutral (blue). The product is dimmable depending on the lamp type and should be cleaned with a soft dry cloth only. Aggressive cleaning products or solvents should not be used as they may damage the product. The product should be recycled in the correct manner when it reaches the end of its life.
Product Usage Instructions
Before installing the NH0183BD or NH0184SQ, carefully read the installation and maintenance manual provided with the product. Follow the instructions provided to ensure proper installation and maintenance of the product. Ensure that the Live wire (brown), Earth wire (green/yellow), and Neutral wire (blue) are connected properly during installation. Before installation, check if the lamp type is compatible with the product’s dimmable feature. Clean the product with a soft dry cloth only. Do not use aggressive cleaning products or solvents which may damage the product. When the product reaches the end of its life, recycle it in the correct manner. Check with local authorities for facilities that accept electrical products for recycling.
FEATURES
GENERAL INSTRUCTIONS
These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid the installation of the following products: NH0183BD / NH0184SQ
SAFETY
- This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
- Please isolate mains prior to installation or maintenance
- Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the circuit cable, fuse or circuit breaker
- Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for installation
- This product is for indoor use only
- This product is Class I and must be earthed
- This product series is IP20 rated
INSTALLATION
- Provide power to the required point of installation
- NH0183BD: using a 7mm spanner, remove the two nuts securing the baseplate to the luminaire
- NH0184SQ: remove the two screws on either side of the baseplate
- Using the baseplate as a template, mark the location of the fixing holes and drill the holes ensuring not to infringe with any gas/water pipes or electrical cables
- Fix the baseplate to a suitable solid surface using the screws provided
- Connect the luminaire to the mains supply ensuring the correct polarity is observed (see Fig. 1): L -Live (brown), E – Earth (green/yellow), N – Neutral (blue)
- Fit two suitable GU10 lamps
- Switch on and check for the correct operation
GENERAL
- Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product.
- This product is dimmable dependent on lamp type, please check compatibility before installation.
- This product should be recycled in the correct manner when it reaches the end of its life. Check local authorities for where facilities exist.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period, it should be returned to the place of purchase for a free-of-charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
ML Accessories Limited LU5 4LT www.mlaccessories.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>