Knightsbridge 12DC40 Constant Voltage LED Driver Instruction Manual
- June 10, 2024
- Knightsbridge
Table of Contents
12DC40 Constant Voltage LED Driver
Product Information
The product is ML Accessories Limited’s 12DC40 / 24DC40, as mentioned in the Installation & Maintenance Manual. This manual provides general instructions for the installation of the product, along with safety measures to be followed to avoid any damage or harm. The product has brown and blue wires, which are respectively identified as live and neutral. The product also comes with a cable clamp, which aids in the installation process. It is important to note that the product must be disconnected from the circuit during high voltage or insulation resistance testing to avoid irreparable damage.
Product Usage Instructions
- Read the installation and maintenance manual carefully before installing the product.
- Identify the brown and blue wires of the product.
- Connect the brown wire to the live terminal and the blue wire to the neutral terminal.
- Use the cable clamp provided with the product to secure the wires.
- Ensure that the product is disconnected from the circuit during high voltage or insulation resistance testing.
- Retain the installation and maintenance manual for future reference and maintenance.
GENERAL INSTRUCTIONS
These instructions should be read carefully and retained after installation by
the end user for future reference and maintenance.
These instructions should be used to aid installation of the following
products: 12DC40 / 24DC40
SAFETY
- This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
- Please isolate mains prior to installation or maintenance
- Check the total load on the circuit (including when this product is fitted) does not exceed the rating of the circuit cable, fuse or circuit breaker
- Please note the IP (Ingress Protection) rating of this product when deciding the location for installation
- Do not overload this accessory or subject it to conditions outside its rating
- This product is Class II double insulated
- This product is IP20 rated
INSTALLATION
- Provide power to the required point of installation
- The driver can be fixed to a solid surface (if required) by using the fixing points shown below
- Unscrew the terminal cover screws (see Fig. 1) and remove the terminal covers
Fig. 1
- Connect the driver to the mains supply ensuring the correct polarity is observed: L – Live (brown), N – Neutral (blue)
- Connect a suitable LED load to the secondary side of the driver: + (red) – (black)
- Refit the two terminal covers ensuring the outer sheath of each cable is secured under the cable clamp
- Switch on and check for correct operation
WARNING
This product must be disconnected from the circuit if subjected to any high
voltage or insulation resistance testing. Irreparable damage will occur if
this instruction is not followed.
GENERAL
This product should be recycled in the correct manner when it reaches the end
of its life. Check local authorities for where facilities exist.
Clean with a soft dry cloth only, do not use aggressive cleaning products or
solvents which may damage the product.
The maximum constant ambient temperature at the point of installation should
not exceed 50° C
This product is non-dimmable.
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to
install this product in accordance with the current edition of the IEE Wiring
Regulations (BS7671), improper use, or removal of the batch code will
invalidate the warranty. If this product should fail within its warranty
period it should be returned to the place of purchase for a free of charge
replacement. ML Accessories does not accept responsibility for any
installation costs associated with the replacement product. Your statutory
rights are not affected. ML Accessories reserve the right to alter product
specification without prior notice.
ML Accessories Limited LU5 4LT
www.mlaccessories.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>