Neomounts NM-D750 Monitor Desk Mount Instructions Manual
- June 10, 2024
- Neomounts
Table of Contents
Neomounts NM-D750 Monitor Desk Mount
Dimensions Overview
Tools and Measurement
Parts
Step 1 A Clamp
Mount the desk clamp to the rod
Step 1 B Clamp
Place the rubber pads
Step 1 C Clamp
Attach the adjustment knob
Step 1 D Clamp
Place the cover
Step 1 E Clamp
Install the clamp to the desk
Step 1 A Grommet
Mount the desk grommet to the rod
Step 1 B Grommet
Place the rubber pads
Step 1 C Grommet
Install the grommet through the desk
Step 2
Attach the VESA plate to the monitor
Step 3
Install the monitor
Step 4
Adjust the gas spring
Step 5
Run the cable through the cable(s) cover
Step 6
Adjust the mount to your desired position
Caution
- To ensure safety, please read this manual carefully before installation and follow the instructions. store this manual in a secure place for future reference.
- The manutacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity, or contact with water,
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
FAQ’s
How thick does a desk need to be for a monitor stand?
Most commercial-grade office furniture desktops of 24 mm thickness will be fine. Commercial desktops of 12 mm thickness are usually OK as well, for single mounts only. Clamp jaws can usually open up to 50 mm in width. If your table is thicker than 50 mm you may have to consider a through mount or a wall mount.
Which is better, a stand or a TV mount for the Neomounts NM-D750?****
If you frequently plug and unplug a number of gadgets, you should have a Neomounts NM-D750 TV stand.
How can I be certain that my Neomounts NM-D750 TV mount is firmly fastened?****
The mounting holes on your flat panel are commonly connected to these straps, and the other end is typically drilled into your furniture and/or wall. Instead of normal screws, use plasterboard fasteners or studs since they will not readily come out of the plasterboard.
How should my television be positioned on the wall?****
indicates that it should work as long as the Neomounts NM-D750 TV mount you select is rated for the size of your television. Different VESA pattern sizes are used by televisions. For televisions up to 32 inches, the most often used standards are VESA 75×75 and 100x100mm.
How can I know if the Neomounts NM-D750 TV mount will function?****
TV size and weight seem to be connected. As televisions get bigger, they get heavier. It will also be mentioned how much weight and how many VESA standards the mount can support. The mount should have no trouble holding the weight of your TV as long as it is situated within the authorized area.
Which kind of wall mount works best?****
TVs up to 84 inches and 132 pounds can be supported by a USX Mount full-motion mount with tilt and swivel options. It extends 16.49 inches from the wall and has a 45-degree range of adjustment.
Can I mount a Neomounts NM-D750 monitor to my desk?****
A Neomounts NM-D750 monitor arm would not be appropriate if your desktop is very thin, say 10 mm or less. When mounting the monitor, check the weight distribution. Again, you run the danger of harm if the desktop isn’t solid enough. Most desks made of commercial-grade office furniture with a 24 mm thickness will be acceptable.
Save space with Neomounts NM-D750 display mounts?****
A monitor arm gives you the option to set your screen exactly where you want it for optimum ergonomics and comfort, in contrast to the stand that most Neomounts NM-D750 displays to go with. Additionally, it can help your workspace look more organized and save up space on your desk.
How do Neomounts NM-D750 monitor desk mounts function?****
You may lift your monitor to the perfect height for you by using a Neomounts NM-D750 monitor arm, which has a robotic-like appearance and attaches to your desk, wall, or ceiling. If you prefer to stand, sit, or alternate between the two throughout the day, it adapts readily to your preferred working style.
What serves as the monitor mount for the Neomounts NM-D750?****
Your displays are supported by a Neomounts NM-D750 monitor mount, which is a robust yet adaptable ergonomic arm. A monitor mount enables you to move and alter the height, angle, or position of your monitor as opposed to standard monitor stands, which keep your monitor in a fixed, stationary position.
Why is a Neomounts NM-D750 monitor mount necessary?****
By adjusting the monitor’s height, depth, and, in most cases, angle, a Neomounts NM-D750 monitor arm will let you place it in the position that is most comfortable for you. It will assist you maintain a more ergonomic posture while standing or sitting, which will lessen eye strain and back and neck problems.
How much room is required by the Neomounts NM-D750 monitor mount?****
To make use of the arm’s full range of motion with the Jarvis Neomounts NM-D750 Monitor Arm, we advise leaving 3–4 inches of room behind the desk. To bring the monitors too close to one another over the desktop, this Dual Jarvis Monitor Arm requires at least 7 inches of spacing.
What is the name of the common Neomounts NM-D750 monitor mount?****
The Video Electronics Standards Association has defined a family of standards for mounting flat panel monitors, televisions, and other displays to stands or wall mounts. These standards are also referred to as the VESA Mounting Interface Standard (MIS) or simply as VESA mount.
Is wall-mounting a monitor using Neomounts NM-D750 preferable?****
NM-D750 from Neomounts Therefore, mounting the monitor on the wall is a great idea because it reduces the amount of rotation required of your upper and lower cervical vertebrae and evenly distributes the weight of your head across your neck extensor muscles in the front and back when you raise your head to look at the monitor mounted on the wall.
How thick a desk must it be for a Neomounts NM-D750 monitor arm to work?****
A monitor arm might not be acceptable if your desktop is very thin, say 10 mm or less. When mounting the monitor, check the weight distribution. Again, you run the danger of harm if the desktop isn’t solid enough. The majority of 24-mm thick desktops from business-grade office furniture will work properly.
What is the operation of a Neomounts NM-D750 monitor mount?****
A Neomounts NM-D750 monitor arm is an arm with a slightly robotic appearance that you may attach to your desk, wall, or ceiling to raise your display to the level that is most comfortable for you. If you prefer to stand, sit, or alternate between the two throughout the day, it adapts readily to your preferred working style.
What different mounting options are there for monitors?****
Monitor mounting solutions can be attached to your desk using a clamp attachment, grommet mount, or rail system, or they can have a stand that rests on top of your work surface. Instead of a stand, mounts of this size are more frequently seen fastened directly to the desk.
Download this PDF Link:Neomounts NM-D750 Monitor Desk Mount Instructions Manual