Future Charger HM40 Foldable Magnetic Wireless Charger User Manual

Future Charger HM40 Foldable Magnetic Wireless Charger

Product Information

This product is a radio receiver that can be connected to an antenna for receiving signals. The product is designed to comply with FCC’s RF Exposure guidelines and should be installed and operated with a minimum distance of 20cm between the radiator and the user’s body. The product comes with a supplied antenna that should be used for optimal performance.

Product Usage Instructions

1. Connect the radio receiver to the antenna using the appropriate cable.
2. Ensure that the minimum distance of 20cm is maintained between the radiator and your body while operating the device.
3. Use only the supplied antenna for optimal performance.
4. In case of any difficulties in installation or operation, consult the dealer or an experienced radio/TV technician for help.

By following these instructions, you can use the radio receiver safely and effectively while adhering to FCC’s RF Exposure guidelines.

Please read the instructions before using the product

Parameter specification

• Model: HM40
• Input: 9V /2.2A, 5V /3A
• Mobile phone output: 15W Max Watch output: 2.SW Max
• Efficiency: 75%

Installation

1. Plug the power adapter into the socket.
2. USB cable @ connects the power adapter.
3. Put connects the USB-C Interface.
4. Put the mobile phone which supports wireless charging function on the launch plate correctly. Indicator light changes to green from blue if it starts to charge. The light will be blue if you remove the mobile phone, which means the wireless charging pad enters in a standby mode.

Mobile phone charging Indicating status and protection function

1. LED blue light: Standby
2. LED green light: Charging
3. Blue light flashing: Mobile phone location in deviation or over temperature protection or trigger FOD

Important notes

Please remove the protective case (except receiver case) when charging, to keep high efficiency. We suggest you use a 2.2A adapter for the best results.

1. Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.
2. Do not use wireless charger in severely hot, humid or corrosive environments, to avoid circuit damage and occurs leakage phenomenon.
3. Do not place stuff with magnetic strip or chip [ID card, bank cards, etc ) on wireless charging pad to avoid magnetic failure.
4. Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear,etc.) and the wireless charger, to avoid potential interference with the medical device.
5. Please take care of the children and ensure they won’t play the wireless charger as a toy, to avoid unnecessary accidents.
6. It is better the mobile phones or other related machines don’t set the vibration mode,as the vibration will cause deviation and effect the charging experience .
7. Please read the manuals calfully before charging,this product can not be ensured to be compatible with the functions of all the machines.

Warranty

There is one year guarantee for this product unless anthropogenic factor.

Packing List

• Foldable Magnetic
• Wireless Charger
• User Manual
• Type-c cable

The involved images are sketch maps, the final product as per the material subjects.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>