Future Charger HM27 Headphone Holder with Mobile Phone Wireless Charging User Manual
- June 5, 2024
- Future Charger
Table of Contents
Future Charger HM27 Headphone Holder with Mobile Phone Wireless Charging
Overview
Parameter specification
- Model: HM27
- Input voltage/current: DC 5V/3.0A, 9V/2.0A, 12V/1.5A
- Mobile phone output: 15W Max
- USB output: 5V/1.0A
- Charging frequency: 115-148 KHz
- Transmission Distance: s5mm
- Efficiency: 275%
Installation
- Plug the power adapter into the socket.
- Connect the adapter.
- Connects the Type-C interface.
- Put a mobile phone which supports a magnetic charging function on the charging area center. The indicator light changes from blue to green when begins charging. The light will be blue if you remove the mobile phone, which means the wireless charging pad enters standby mode.
Indicating status and protection function
- LED blue light: Standby
- LED green light: Charging
- LED blue light flashing: Mobile phone location in deviation or over-temperature protection or trigger FOD.
Important notes
- Please remove the protective case (except the receiver case) when charging In order to keep a high efficiency, we suggest you use a 2A adapter for the best results.
- Do not disassemble the charger or throw it into fire and water, to avoid causing a short circuit leakage.
- Do not use the wireless charger in severely hot, humid, or corrosive environments, to avoid circuit damage and ocCurs leakage phenomenon.
- Do not place stuff with a magnetic stripe or chip (ID card, bank cards, etc) on a wireless charging pad to avoid magnetic card failure.
- Please keep the distance at least 20cm between implantable medical devices (pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential interference with the medical device.
- Please take care of the children and ensure they won’t play with the wireless charger as a toy, to avoid unnecessary accidents.
- It is best not to set the mobile phone or other related devices to vibration mode, because the vibration will cause position deviation and affect the charging experience.
- Please read the manuals carefully before charging, this product can not ensure to be compatible with the functions of all the machines.
Warranty
There is one year guarantee for this product unless anthropogenic factors.
Packing List
- Headphone holder with mobile phone wireless charging
- User Manual
- Type-C Cable
The involved images are sketch maps, the final product as per the material subjects.
FCC STATEMENT WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>